The fabrication of ReS2 flowers at controlled locations by chemical vapor deposition

Here we report a metal induced nucleation to realize the growth of ReS₂ flowers at controlled locations. The ordered arrays of ReS₂ flowers have been successfully prepared on SiO₂/Si substrate using Pt metal dots as nucleation sites and S, NH₄ReO₄ powders as precursors by a chemical vapor depostion method. The NH₄ReO₄ powders are used as the rhenium sources. The ReS₂ flowers are grown above the pre-patterned Pt dots, Raman and transmission electron microscopy measurements indicated that the prepared ReS₂ flowers have excellent crystalline quality.     

Structured water chains in external electric fields

ABSTRACT

We study the structural, energetic and electronic properties of the structured water chain clusters within the density functional theory. We refer the structured water chains to those water clusters that have specific geometric patterns stretched along one direction. External electric field required to keep the structures open chain, thereby preventing them to form closed structures, is applied along the length of the chain. The structures are essentially periodic with basic repeating unit consisting of the corner- or edge-sharing 4-, 5- or 6-membered ring water clusters. Our calculations underscore the possible existence of such structured water clusters in the electrostatic environments, which we simulate in its simplicity employing a dipolar, uniform and static electric field. Analysis reveals that the 5-membered ring water chain clusters, i.e. the pentamer chain clusters have the lowest average dipole moment per water molecule while the threshold field, that marks the onset of the field-induced closure of the HOMO (highest occupied molecular orbital)-LUMO (lowest unoccupied molecular orbital) energy gap, is highest, followed by that for the tetramer and hexamer chains. The results suggest that the pentamer chains are the most stable clusters over a wide range of electric fields.     

InGaAsP/InP photodetectors targeting on 1.06 μm wavelength detection

InP-based InGaAsP photodetectors targeting on 1.06 μm wavelength detection have been grown by gas source molecular beam epitaxy and demonstrated. For the detector with 200 μm mesa diameter, the dark current at 10 mV reverse bias and R₀A are 8.89 pA (2.2 × 10⁻⁸ A/cm²) and 3.9 × 10⁵ Ω cm² at room temperature. The responsivity and detectivity of the InGaAsP detector are 0.30 A/W and 1.45 × 10¹² cm Hz^1/2 W⁻¹ at 1.06 μm wavelength. Comparing to the reference In_0.53Ga_0.47As detector, the dark current of this InGaAsP detector is about 570 times lower and the detectivity is more than ten times higher, which agrees well with the theoretical estimation.     

Synthesis of tunable core–shell nanostructures based on TiO2-graphene architectures and their application in the photodegradation of rhodamine dyes

We present the synthesis of core–shell nanostructural materials with multi-component architectures based on TiO₂ and graphitic layers. The composites have been synthesized by chemical vapor deposition with methane as the carbon source, for 5, 10, 30 and 45 min. The final products were characterized by a combination of analytical approaches which include: electron microscopy, Raman, FT-IR and UV–vis spectroscopy as well as thermogravimetric analysis. The amount of graphene shells covering the TiO₂ surfaces was found to vary linearly with the reaction time. Furthermore, the compounds were shown to have excellent stability and photocatalytic activity towards the UV degradation of rhodamine (RhB) dye solution at room temperature. These composites could have major applications in the area of environmental cleaning of various pollutants, electrochemistry or nanomedicine.     

Cooperative spectrum sharing MIMO systems with successive decoding

A spectrum sharing system with primary and secondary nodes, each equipped with an arbitrary number of antennas, is investigated. Particularly, the outage performance of an underlay cognitive system is analytically studied, in the case when the end-to-end ($e2e$) communication is established via an intermediate relay node. To better enhance the $e2e$ communication, successive interference cancellation (SIC) is adopted, which compensates for both the transmission power constraint and the presence of interference from primary nodes. Both the relay and secondary receiver perform unordered SIC to successively decode the multiple streams, whereas the decode-and-forward relaying protocol is used for the $e2e$ communication. New closed-form expressions for the $e2e$ outage performance of each transmitted stream are derived in terms of finite sum series of the Tricomi confluent hypergeometric function. In addition, simplified yet tight approximations for the asymptotic outage performance are obtained. Useful engineering insights are manifested, such as the diversity order of the considered system and the impact of interference from the primary nodes in conjunction with the constrained transmission power of the secondary nodes.     

Solitons and conservation laws in magneto–optic waveguides having parabolic–nonlocal law of refractive index

This paper reveals soliton solutions to magneto–optic waveguides that maintain parabolic–nonlocal law of refractive index. The unified Riccati equation expansion together with extended auxiliary equation approach together reveal bright, dark, singular as well as straddled optical solitons. These soliton solutions are obtained through a limiting process when the modulus of ellipticity approaches unity. Finally, the conservation laws are also listed.     

Rectifying resistance switching behaviors of SnO2 microsphere films modulated by top electrodes

Based on the bipolar resistive switching (RS) characteristics of SnO₂ films, we have fabricated a new prototypical device with sandwiched structure of Metal/SnO₂/fluorine-doped tin oxide (FTO). The SnO₂ microspheres film was grown on FTO glass by template-free hydrothermal synthesis, which was evaporated with various commonly used electrodes such as aluminium (Al), silver (Ag), and gold (Au), respectively. Typical self-rectifying resistance switching behaviors were observed for the RS devices with Al and Au electrodes. However, no obvious rectifying resistance switching behavior was observed for the RS device with Ag electrode. Above results were interpreted by considering the different interface barriers between SnO₂ and top metal electrodes. Our current studies pave the ways for modulating the self-rectifying resistance switching properties of resistive memory devices by choosing suitable metal electrodes.     

Sonication enhances the stability of MnO2 nanoparticles on silk film template for enzyme mimic application

We have developed an in-situ method using sonication (3 mm probe sonicator, 30 W, 20 kHz) and auto-reduction (control) to study the mechanism of the formation of manganese dioxide (MnO₂) on a solid template (silk film), and its resulting enzymatic activity on tetramethylbenzidine (TMB) substrate. The fabrication of the silk film was first optimized for stability (no degradation) and optical transparency. A factorial approach was used to assess the effect of sonication time and the initial concentration of potassium permanganate (KMnO₄). The result indicated a significant correlation with a fraction of KMnO₄ consumed and MnO₂ formation. Further, we found that the optimal process conditions to obtain a stable silk film with highly catalytic MnO₂ nanoparticles (NPs) was 30 min of sonication in the presence of 0.5 mM of KMnO₄ at a temperature of 20–24 °C. Under the optimal condition, we monitored in-situ the formation of MnO₂ on the silk film, and after thorough rinsing, the in-situ catalysis of 0.8 mM of TMB substrate. For control, we used the auto-reduction of KMnO₄ onto the silk film after about 16 h. The result from single-wavelength analysis confirmed the different kinetics rates for the formation of MnO₂ via sonication and auto-reduction. The result from the multivariate component analysis indicated a three components route for sonication and auto-reduction to form MnO₂-Silk. Overall, we found that the smaller size, more mono-dispersed, and deeper buried MnO₂ NPs in silk film prepared by sonication, conferred a higher catalytic activity and stability to the hybrid material.     

First-principles investigation on ideal strength of B2 NiAl and NiTi alloys

For B2 NiAl and NiTi intermetallic compounds, the ideal stress–strain image is lack from the perspective of elastic constants. We use first-principles calculation to investigate the ideal strength and elastic behavior under the tensile and shear loads. The relation between the ideal strength and elastic constants is found. The uniaxial tension of NiAl and NiTi along <001> crystal direction leads to the change from tetragonal path to orthogonal path, which is driven by the vanishing of the shear constant C(66). The shear failure under {110}{111} shear deformation occurring in process of tension may result in a small ideal tensile strength(~ 2 GPa) for NiTi. The unlikeness in the ideal strength of Ni Al and Ni Ti alloys is discussed based on the charge density difference.     

污泥中重金属的形态分析及其可浸出性

以自来水厂和污水处理厂的污泥为研究对象,采用Tessier五步法和火焰原子吸收光谱法研究污泥中重金属（Zn、Cu、Cd、Ni、Mn）含量、形态分布以及可浸出性。结果发现,在自来水厂污泥和污水处理厂污泥中重金属总量大小依次为Zn〉Mn〉Ni〉Cu〉Cd,Zn〉Mn〉Cu〉Ni〉Cd,污泥中Zn含量最高,为448.17mg.kg-1;Cd含量最低,为27.17mg.kg-1,超过国家标准,限制了污泥的农用。Tessier形态分析结果表明,污泥中Zn、Cu、Cd主要以稳定态存在;Mn主要以有效态存在,潜在的迁移性和植物毒性最值得关注;Cu浸出率最高,为14.8%,Zn浸出率最低,为0.11%,因此浸出率不仅与金属和污泥的特性有关,而且金属在污泥中赋存的化学形态对其可浸出性也有重要的影响。