顶空液液萃取-气相色谱-质谱法用于白术挥发性成分的分析

采用高温顶空液相萃取再转移的方法,对中药白术中挥发性成分进行萃取分离富集,采用顶空液液萃取/气相色谱-质谱(HS-LP-LPE/GC-MS)联用法进行测定,并与传统水蒸汽蒸馏法(SD)提取的挥发性成分进行对比。对各种测定条件和影响因素进行了考察,最佳萃取条件为:1.0 mL PEG 400为高温萃取剂,样品用量1.2 g,萃取温度120℃,萃取时间60 min,再将萃取剂用1.0 mL正己烷进行反萃取后进行GC-MS分析;采用HS-LP-LPE/GC-MS鉴定了33个组分,占总组分含量93.18%;SD鉴定了31个组分,占总组分含量97.12%。两种方法共同检测到的组分有29个,均以苍术酮(Atractylone)含量最高。结果表明,两种方法所提取的组分基本相同,可用于白术挥发性成分的测定。     

Bioactive Components of Salvia and Their Potential Antidiabetic Properties: A Review

The utilization of therapeutic plants is expanding around the globe, coupled with the tremendous expansion of alternative medicine and growing demand in health treatment. Plants are applied in pharmaceuticals to preserve and expand health—physically, mentally and as well as to treat particular health conditions and afflictions. There are more than 600 families of plants identified so far. Among the plants that are often studied for their health benefit include the genus of Salvia in the mint family, Lamiaceae. This review aims to determine the bioactive components of Salvia and their potential as antidiabetic agents. The search was conducted using three databases (PubMed, EMBASE and Scopus), and all relevant articles that are freely available in the English language were extracted within 10 years (2011–2021). Salvia spp. comprises many biologically active components that can be divided into monoterpenes, diterpenes, triterpenes, and phenolic components, but only a few of these have been studied in-depth for their health benefit claims. The most commonly studied bioactive component was salvianolic acids. Interestingly, S. miltiorrhiza is undoubtedly the most widely studied Salvia species in terms of its effectiveness as an antidiabetic agent. In conclusion, we hope that this review stimulates more studies on bioactive components from medicinal plants, not only on their potential as antidiabetic agents but also for other possible health benefits.     

基于临界电子密度的多载波微放电全局阈值分析

多载波微放电即发生在宽带、大功率真空无源微波部件中的二次电子倍增放电现象, 是影响空间和加速器应用中无源微波部件长期可靠性的主要隐患. 多载波微放电全局阈值功率的预测对于工作在真空环境中的微波部件至关重要, 但迄今尚无有效方法进行上述阈值的准确分析. 本文将微放电发生过程中二次电子分布区域等效为等离子体, 通过在理论上建立微波部件的电磁特性和电子密度间的对应关系, 提出了一种基于测试系统可检测水平的多载波微放电全局阈值功率分析方法. 为了能够通过蒙特卡罗优化方法得到全局阈值, 进一步基于电子加速的类半正弦等效, 提出了微放电演化过程中电子数涨落的快速计算方法. 基于以上两种方法得到的针对实际微波部件的全局阈值分析结果与实验结果相符合. 不同于传统基于多载波信号功率分析的经验方法, 本文基于临界电子密度判断依据和电子数涨落快速计算, 为多载波微放电全局阈值的准确预测提供了一种高效的分析方法.     

Mixing of Racemic Poly(L-lactide)/Poly(D-lactide) Blend with Miscible Poly(D,L-lactide):Toward All Stereocomplex-type Polylactide with Strikingly Enhanced SC Crystallizability

Stereocomplex-type polylactide (SC-PLA) consisting of alternatively arranged poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA) chains has gained a good reputation as a sustainable engineering plastic with outstanding heat resistance and durability,however its practical applications have been considerably hindered by the weak SC crystallizability.Current methods used to enhance the SC crystallizability are generally achieved at the expense of the precious bio-renewability and/or bio-degradability of PLAs.Herein,we demonstrate a feasible method to address these challenges by incorporating small amounts of poly(D,L-lactide) (PDLLA) into linear high-molecular-weight PLLA/PDLA blends.The results show that the incorporation of the atactic PDLLA leads to a significant enhancement in the SC crystallizability because its good miscibility with the isotactic PLAs makes it possible to greatly improve the chain mixing between PLLA and PDLA as an effective compatibilizer.Meanwhile,the melt stability (i.e.,the stability of PLLA/PDLA chain assemblies upon melting) could also be improved substantially.Very intriguingly,SC crystallites are predominantly formed with increasing content and molecular weight of PDLLA.More notably,exclusive SC crystallization can be obtained in the racemic blends with 20 wt％ PDLLA having weight-average molecular weight of above 1 ×10s g/mol,where the chain mixing level and intermolecular interactions between the PLA enantiomers could be strikingly enhanced.Overall,our work could not only open a promising horizon for the development of all SC-PLA-based engineering plastic with exceptional SC crystallizability but also give a fundamental insight into the crucial role of PDLLA in improving the SC crystallizability of PLLA/PDLA blends.     

气相色谱-质谱联用结合化学计量学方法分析光照对鱼腥草挥发性成分的影响

采用色谱-质谱联用技术结合化学计量学方法对不同光照生长条件的鱼腥草挥发性成分进行分析。水蒸气蒸馏法提取鱼腥草挥发油,气相色谱-质谱进行分析。色谱指纹图谱结合主成分分析与相似度评价以探究不同光照挥发油成分的异同。直观推导式演进特征投影法(Heuristic evolving latent projections,HELP)分辨重叠色谱峰,NIST标准质谱库结合相关文献进行定性,峰面积归一化法定量,t-检验比较不同光照组成分含量间是否有显著性差异。3种光照下的鱼腥草挥发油指纹图谱存在一定的共性和差异,共鉴定出33种化合物,共有化合物26种。随着光照强度的减少,单萜类化合物含量减少,非萜类含量增多,倍半萜类变化不大。癸酰乙醛和甲基正壬酮在全光照组的含量明显低于遮光组的含量。研究结果表明,适度的遮光有利于鱼腥草挥发性有效成分含量的提高,鱼腥草药材挥发性成分种类及含量与生长条件密切相关。     

Simultaneous determination of 20 bioactive components in Chuanxiong Rhizoma from different production origins in Sichuan province by ultra-high-performance liquid chromatography coupled with triple quadrupole mass spectrometry combined with multivariate statistical analysis

Chuanxiong Rhizoma is a commonly used in traditional Chinese medicine. Chuanxiong Rhizoma is widely distributed in Sichuan province, China, including the cities of Dujiangyan, Pengzhou, Meishan, Qionglai, and Shifang. However, reports on the comparisons of quality of Chuanxiong Rhizoma of different production origins are limited. Therefore, an ultra-HPLC with triple quadrupole MS method was developed for the determination of 20 bioactive components (12 aromatic acids and eight phthalides) in 36 samples from different production origins and further assessed its quality. The contents of these 20 constituents of samples were analyzed by hierarchical cluster analysis and orthogonal partial least squares discrimination analysis; the result indicated that Chuanxiong Rhizoma of different production origins had some differences. Thirteen constituents of quality difference markers were acquired by variable importance for the project. Furthermore, the sum of the contents of these quality difference markers was different from various production origins of Chuanxiong Rhizoma. Meanwhile, Z-ligustilide and senkyunolide A as main constituents of quality difference markers, the rate of various production origins of Chuanxiong Rhizoma was different. This study provides a foundation for the quality assessment of Chuanxiong Rhizoma.     

Quantitative decomposition of resonance-assisted hydrogen bond energy in β-diketones into resonance and hydrogen bonding (π- and σ-) components using molecular tailoring and function-based approaches

Using the molecular tailoring and function-based approaches allows one to divide the energy of the O─H⋯O═C resonance-assisted hydrogen bond in a series of the β-diketones into resonance and hydrogen bonding components. The magnitude of the resonance component is assessed as about 6 kcal mol⁻¹. This value increases by ca. 1 kcal mol⁻¹ on going from the weak to strong resonance-assisted hydrogen bonding. The magnitude of the hydrogen bonding component varies in the wide range from 2 to 20 kcal mol⁻¹ depending on the structure of the β-diketone in question.     

叶丝在增温增湿与滚筒烘丝工序中香味组分变化分析

该文研究了制丝线增温增湿和滚筒烘丝工序加工对叶丝香味组分的影响,采用溶剂超声萃取前处理结合GC-MS法测定叶丝的香味组分,并对SIROX增温增湿工序和滚筒烘丝工序前后叶丝香味组分的相对含量进行了分析,比较了工序前后、工序间香味组分的变化趋势。结果显示:①经SIROX增温增湿工序加工后,乙酸、苯甲醇等18种组分相对含量减少,糠醇、2,4-二羟基-2,5-二甲基-3(2H)-呋喃-3-酮等6种组分相对含量增加;②经滚筒烘丝工序加工后,乙酸、麦芽酚等14种组分相对含量减少,糠醇、糠醛等6种组分相对含量增加;③经增温增湿及滚筒烘丝两工序后,乙酸、2,3-丁二醇等23种组分相对含量减少,糠醇、2,4-二羟基-2,5-二甲基-3(2H)-呋喃-3-酮等4种组分相对含量增加;④两工序间的温度、湿度剧烈变化,使叶丝内部组分发生了美拉德反应、降解反应、挥发等,香味组分经两个工序后发生了一系列显著变化。该研究对提升卷烟产品质量、优化工艺参数、开发高质量产品具有重要意义。     

Comparison of the active components of Aster tataricus from different regions and related processed products by ultra‐high performance liquid chromatography with tandem mass spectrometry

We investigated crude Aster tataricus, vinegar‐processed Aster tataricus, honey‐processed Aster tataricus, and steamed Aster tataricus as a case study and developed a comprehensive strategy integrating quantitative analysis and chemical pattern recognition methods for the evaluation and differentiation of Aster tataricus from different regions, as well as related processed products. In the study, 15 batches of raw Aster tataricus collected from seven provinces were analyzed. A sensitive and rapid ultra‐high performance liquid chromatography with tandem mass spectrometry method for simultaneous determination of 15 compounds was established to evaluate the quality of raw and processed Aster tataricus. Furthermore, multivariate statistical techniques were applied to compare the differences among Aster tataricus samples. As a result, the herbs collected from seven provinces were divided into two categories, and chlorogenic acid was the most important component distinguishing between the regions. Moreover, all of the raw and processed samples were classified by partial least squares discriminant analysis based on the 15 analyzed compounds. Results showed that raw Aster tataricus, vinegar‐processed Aster tataricus, honey‐processed Aster tataricus, and steamed Aster tataricus were clustered in four different areas. Shionone, chlorogenic acid and kaempferol were the significant constituents differentiating the raw and differently processed Aster tataricus samples.     

聚乳酸熔体纺丝、粘接和吸附性能的初步研究

针对制备香烟过滤嘴用丝束和过滤嘴棒的特殊需要,研究了聚乳酸的纺丝、粘接和吸附性能,通过流变学测量考察了各种加工因素对熔体流动性和可纺性的影响,特别是残留水分的影响,用分子量、DSC和力学性能测量跟踪了熔体纺丝和后加工过程.所获结果对确定聚乳酸树脂的规格范围,确定纺丝和后加工工艺,具有参考价值.