Molecular Constants of the NbN Molecule

Absorption spectrum of NbN has been obtained in the 560–670 nm region by intracavity laser spectroscopy. Vibrational and rotational analyses of ³φ - ³Δ transition has been caried out. Molecular constants for the upper (³φ) and ground (³Δ) states have been determined.     

多元统计分析方法的理论研究及应用分析

多元统计分析在多指标实际问题的研究中起着重要的作用.以往文献中,一般采用某一种多元统计方法对一个多指标实际问题进行研究,但其结果存在一定的偏差性.采用四种典型的多元统计方法:主成分分析法、因子分析法、分层聚类和K-均值聚类方法对同一个多指标银行问题进行研究,并对四种方法的不同结果进行比较综合分析,这样可以避免单一方法的偏差性,以便得到的结果更合理、更具有说服力.     

误差合成空间固定系数模型的多阶段广义最小二乘估计

本文对时变系数的空间面板数据模型进行了研究,所研究的模型利用扰动项中的空间个体成分将不同时期的方程联系起来,同时,自变量系数和空间自回归系数是时变的,但不会随着观测个体的变动而变动。本文利用基于可行的广义最小二乘估计的多阶段方法对模型参数进行了估计,研究了估计量的大样本性质,并利用Monte Carlo方法模拟了其小样本性质。模拟结果表明,估计量的渐近性质随着样本容量的增加而改善。对中国省级地区间财税策略互动行为的实证案例也体现了本文理论模型的应用价值。     

Combining GPS carrier phase and Doppler observations for precise velocity determination

The truncation error and propagation error are analyzed for velocity determination through differential GPS carrier phase observations,and an approach for the choice of the best number of points for the central difference method is developed.In order to overcome the disadvantages of existing GPS velocity determination methods,a new velocity determination algorithm is presented,based on combining carrier phase and Doppler observations.The basic idea is that two types of observation are combined by adding the...     

重度原油注空气低温氧化过程研究(英文)

低温氧化反应对现场燃烧(ISC)技术点火的成功有十分重要的影响.采用高压氧化管,研究了不同温度压力下,新疆克拉玛依重度原油的低温氧化过程.结果表明,温度和压力的变化对低温氧化反应的放热程度、持续时间以及气体产物有明显影响.适合油样低温氧化反应的温度和压力分别为150℃和10MPa.此外,采用纯组分替代原油族组分进行低温氧化实验,研究低温氧化反应对原油族组分(饱和烃、芳香烃、胶质、沥青质)含量的影响.结果表明,原油所含族组分中,芳香烃组分最易被氧化,其含量由氧化前的19.17%减少到12.38%(150℃)和9.51%(250℃).随着低温氧化过程的进行,结构复杂的族组分(胶质、沥青质)的含量明显增加.实验数据对油藏实施注空气技术,以及该技术现场实施条件的确定有十分重要的指导意义.     

鸡骨素及其酶解液的美拉德反应产物挥发性风味成分比较分析

利用固相微萃取/气相色谱-质谱(SPME/GC-MS)联用与电子鼻(E-Nose)嗅探技术对鸡骨素美拉德反应产物(MRPs1)及鸡骨素酶解液美拉德反应产物(MRPs2)中的挥发性风味成分进行比较分析。在两种产物中共鉴定出77种挥发性化学成分,其中醇类18种、醛酮类23种、酸类3种、酯类10种、杂环类7种及其他类16种,两种产物中共有成分26种。与MRPs1相比,MRPs2中醛酮、杂环类化合物的相对含量较高,但前者的酯类物质含量更为丰富。(E)-2-辛烯-1-醇、(6Z,9Z)-十五碳二烯-1-醇、苯甲醛、辛醛、6-甲基-5-庚烯-2-酮、2-乙基-3-羟基-4(4H)-吡喃酮、2,3,5-三甲基-6-乙基吡嗪、2-[(甲基二硫基)甲基]呋喃构成了MRPs2的特有成分,γ-丁位十二内酯为MRPs1的特有成分。在两种反应产物中,除4-甲基-5-羟乙基噻唑的相对含量均较高外(MRP1相似文献   

Muscle oxygenation measurement in humans by noninvasive optical spectroscopy and Locally Weighted Regression

We have developed a method to make real-time, continuous, noninvasive measurements of muscle oxygenation (Mox) from the surface of the skin. A key development was measurement in both the visible and near infrared (NIR) regions. Measurement of both oxygenated and deoxygenated myoglobin and hemoglobin resulted in a more accurate measurement of Mox than could be achieved with measurement of only the deoxygenated components, as in traditional near-infrared spectroscopy (NIRS). Using the second derivative with respect to wavelength reduced the effects of scattering on the spectra and also made oxygenated and deoxygenated forms more distinguishable from each other. Selecting spectral bands where oxygenated and deoxygenated forms absorb filtered out noise and spectral features unrelated to Mox. NIR and visible bands were scaled relative to each other in order to correct for errors introduced by normalization. Multivariate Curve Resolution (MCR) was used to estimate Mox from spectra within each data set collected from healthy subjects. A Locally Weighted Regression (LWR) model was built from calibration set spectra and associated Mox values from 20 subjects using 2562 spectra. LWR and Partial Least Squares (PLS) allow accurate measurement of Mox despite variations in skin pigment or fat layer thickness in different subjects. The method estimated Mox in five healthy subjects with an RMSE of 5.4%.     

Synthesis of New Azocompounds and Fused Pyrazolo[5,1‐c][1,2,4]triazines Using Heterocyclic Components

Diazotization of 3‐methyl‐4‐phenyl‐1H‐pyrazol‐5‐amine 1 in hydrochloric acid has been reported to afford the corresponding diazonium salt 2 . The latter underwent azocoupling with a variety of active methylene compounds (barbituric 3a and thiobarbituric 3b acid, 2‐hetarylpyrimidine‐4,6‐dione 6a , 6b , 4‐hydroxy‐6‐methylpyridin‐2(1H)‐one 10a , 4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one 10b , 4‐hydroxy‐1‐p‐tolyl‐1H‐pyrazole‐3‐carboxylic acid ethyl ester 14 , 1,3‐thiazolidine‐2,4‐dione 16a , 2‐thioxo‐1,3‐thiazolidin‐4‐one 16b ) to yield new pyrazolylazo derivatives. Fused pyrazolo[5,1‐c][1,2,4]triazines 5 , 9a , 9b , 12 , 13 were obtained by heterocyclization reactions. Copyright © 2013 HeteroCorporation     

A correlation between the variable melt flow index and the molecular mass distribution of virgin and recycled polypropylene used in the manufacturing of battery cases

This study looked at establishing a correlation between the variable melt flow index (VMFI) values of molten polypropylene (PP) with different piston-load masses using a standard MFI analyser. The study was done using virgin PP and recycled PP obtained from recycling Pb-acid batteries. The study showed that the results would fit a suitable power function equation where the size of the exponent reflects the increase in flow characteristics of the polymer with increased piston-load mass. The established correlation was then compared to the average molecular weight distribution of virgin PP determined by gel permeation chromatography (GPC). Good agreement was obtained for the range of grades of virgin PP samples that correlated well with the Mark-Houwink power law where the inverse of the MFI (1/MFI) would be proportional to the average molecular weight to the power of 3.4 (Mw^3.4). GPC analysis cannot be effectively used to study recycled PP, where a number of factors can influence the melt flow properties such as fillers, impurities and the presence of polyethylene in the polymer matrix. Instead, a comparative understanding of the flow behaviour of recycled PP to that of virgin PP was done by using the VMFI method to possibly show the dissimilar polymer melt flow behaviour of using virgin and recycled PP material in injection moulding of new battery cases and lids, or when attempting to seal the lid to the battery case during manufacturing.