Establishment of A431 cell membrane chromatography-RPLC method for screening target components from Radix Caulophylli

We describe here an analytical method of A431 cell membrane chromatography (A431/CMC) (CMC, cell membrane chromatography) combined with RPLC for recognition, separation, and identification of target components from traditional Chinese medicines (TCMs) Radix Caulophylli. The A431 cells with high expressed epidermal growth factor receptor (EGFR) were used to prepare the stationary phase in the CMC model. Retention fractions on the A431-CMC model were collected using an automated fraction collection and injection module (FC/I). Each fraction was analyzed by RPLC under the optimized conditions. Gefitinib and erlotinib were used as standard compounds to investigate the suitability and reliability of the A431 cell membrane chromatography-RPLC method prior to screening target component from Radix Caulophylli total alkaloids. The results indicated that caulophine and taspine were the target component acting on the epidermal growth factor receptor. This method could be an efficient way in drug discovery using natural medicinal herbs as a source of novel compounds.     

Liquid chromatography/mass spectrometry-based metabolic profiling to elucidate chemical differences of tobacco leaves between Zimbabwe and China

An approach was developed for extracting and analyzing the chemical components of tobacco leaves based on solvent extraction and rapid & resolution liquid chromatography/quadrupole time-of-flight mass spectrometry analysis. Two solvents with different polarities were used to extract hydrophilic components and hydrophobic components, respectively, the combined analytical data can provide a "global" view of metabolites. Based on the evaluation of parallel samples, it was found that this approach provided good repeatability, accurate and reliable profiling data, and is suitable for the metabolomics study of tobacco leaves. In order to find the chemical component differences of tobacco leaves, 56 samples from Zimbabwe and China were analyzed using the developed method. The metabolite data were processed by multivariate statistic technique; an obvious group classification between Zimbabwe and China was observed, 14 significantly changed compounds were found, and 9 of them were identified.     

Numerical simulation of a two-phase melt spinning model

We consider a two-phase model of melt spinning including flow induced crystallization. Introducing slight modifications in the model we perform numerical simulations on it. We present comparison of our velocity profiles with the experimental profiles provided by the company Freudenberg & Co.     

梯度下降法在沉积物粒度分布拟合中的应用

结合实测数据,以三个对数正态分布函数的和函数为拟合函数,以梯度下降法为主要方法,对沉积物粒度分布进行了数据拟合,通过数值实验我们发现:利用梯度下降法可以有效地优化分布函数的各参数,实现拟合残差的稳步持续减小,具有良好的可操作性,拟合效果是令人满意的,它为我们进行数据拟合提供了一条新的思路,同时此方法也可以推广到解决其他极值问题.     

Investigation of semi-insulating oxygen-doped GaAs

We found Oxygen-doped GaAs crystals to be suitable materials for CO₂ laser optical component preparation, with application at 10.6 μm. An optical transmission of 55% in the IR spectrum range, between 2 and 15 μm has been reached for such a GaAs type material. The GaAs crystals that we have analysed were grown by two procedures: Horizontal Bridgman (HB) and Liquid Encapsulated Czochralski (LEC). The HB method has been used for obtaining pure (undoped) crystals, while the oxygen-doped GaAs ingots were grown by LEC technique. The two types of samples processed in the same manner as regards mechanical polishing and chemical etching, which were investigated by Hall measurements, optical transmission spectrometry and elastic recoil detection analysis (ERDA) technique. The GaAs:O (LEC) has near semi-insulating properties as can be observed from the results of the electrical resistivity and Hall effect measurements. The ERDA spectrum shows an intense signal of oxygen in the bulk of GaAs:O (LEC) crystals, while the oxygen signal is not present in the ERDA spectrum of the undoped GaAs (HB). We consider that these results could recommend the ERDA technique as a possible qualitative and quantitative analysis in an ion-beam accelerator for oxygen content in oxygen-doped GaAs crystals. The analysis is not sensitive to the native oxide, as could be seen by measuring GaAs (HB) undoped crystals.     

Effects of high pressure on unsaturated fatty acids

The objective of this study is to investigate the effects of high pressure processing on the molecular structure of some unsaturated fatty acids. Samples of elaidic acid, linoleic acid, ZE and EE conjugated linoleic acid are treated at 293 or 333?K at pressures up to 700?MPa. It is observed that the adiabatic heat generated from compression is able to bring the sample temperature above 373?K after 700?MPa. These relatively extreme conditions are of great interest for food sterilization, but they may induce undesirable change in fatty acid quality characteristics. To check for structural changes, Raman spectra of the samples are analysed after treatments. The comparison with Raman spectra of samples kept at atmospheric pressure shows that pressure induces some conformational changes at the hydrocarbon skeleton in solid samples, while the liquid ones remain unchanged. No cis/trans isomerization occurs, but gauche conformers are likely to be present.     

Fabrication of continuous fiber-reinforced thermoplastic composites with structural gradient from sheath-core type bicomponent fibers

Sheath-core type bicomponent fibers of polypropylene (PP) as a sheath component and thermotropic liquid crystalline polymer (TLCP) as a core component were prepared by the highspeed melt spinning process. Continuous fiber reinforced thermoplastic composites, in which TLCP acts as a reinforcing fiber and PP as a matrix polymer, were fabricated by the compression molding of these fibers. In the melt spinning, the attainable highest take-up velocity of TLCP was improved by co-processing with PP. Tensile modulus and strength of the TLCP component in the PP/TLCP bicomponent fibers increased with an increase in the take-up velocity. Comparison of wide-angle X-ray diffraction patterns of starting bicomponent fibers and fabricated composites indicated that the orientation relaxation of TLCP did not occur in the compression molding process. Accordingly, the tensile modulus and strength of the PP/TLCP composites were similar to those of the bicomponent fibers. Continuous fiber reinforced thermoplastic composites with various types of fiber content distributions were fabricated from the bicomponent fibers in which sheath-core composition was changed gradually in the spinning process. In the three-point bending test, the composites with two different types of symmetric structural gradients, one with higher TLCP fiber content near the surfaces than in the center and the other with higher TLCP content in the center than near the surfaces, exhibited different flexural moduli even though the overall TLCP contents were comparable. In the three-point bending test of a composite with asymmetric structural gradient, the yielding behavior and maximum flexural load varied depending on the direction of load application although the initial flexural moduli were similar.     

不同光谱成分条件下叶用莴苣矿质元素吸收分析

以叶用莴苣为试验材料,应用ICP-AES等技术,研究了不同光谱成分及其组合条件下生菜对矿质元素的吸收特性。结果显示:(1)生菜常量、微量矿质元素含量比约为Ca:Mg:K:Na:P=5.5:2.5:2.3:1.5:1.0,Fe:Mn:Zn:Cu:B=25.9:5.9:2.8:1.1:1.0,且LED及荧光灯处理下的生菜各元素含量均高于自然光,差异显著;(2)生菜在红蓝组合LED光R/B=1:2.75处理下对K,P,Ca,Mg,B元素的吸收量及累积量均达最大,LED及荧光灯红光均可显著促进生菜对Fe和Cu元素的吸收;(3)矿质元素含量较高及干物质积累量较高的处理均为LED灯R/B=1:2.75和B/W=1:1。     

Pion mass dependence of the nucleon mass in the chiral quark soliton model

The dependence of the nucleon mass on the mass of the pion is studied in the framework of the chiral quark-soliton model. A remarkable agreement is observed with lattice data from recent full dynamical simulations. The possibility and limitations to use the results from the chiral quark soliton model as a guideline for the chiral extrapolation of lattice data are discussed.