Laser evaporation as a source of small free radicals

It is shown that laser evaporation of a solid target followed by adiabatic expansion can be used to produce cold beams of neutral small open shell molecules. LIF is applied to detect CuH (X ¹), CH (X ²), SiH (X ²), CuO (X ²), and FeO (X ⁵). A production of 10^9±1 molecules/sr in a single pulse is obtained for SiH. For a copper target, the optical emission of the jet plume is discussed.     

Chen’ s theorem in arithmetical progressions

LetN be a sufficiently large even integer and

Chelatometric titration of tin in non-ferrous alloys with hedta

A new titrimetric method for determination of tin (4%) in aluminium alloys, tin- and lead-base alloys, solders, white bearing alloys, special bronzes and silver brazing alloys is proposed. HEDTA, Semi-Xylenol Orange and bismuth perchlorate are used as titrant, indicator and back-titrant respectively. Measures are taken to overcome the hydrolysis of Sn(IV). Monochloroacetic acid and ethylene glycol are added as auxiliary agents. The standard deviation of this method was found to be 0.2 mg and its coefficient of variation to vary from 0.25 to 2%, according to amount of tin. A novel method of sample decomposition and a modified method for separating Sn(IV) are also suggested.     

Heck reactions of stilbenoid chromophores with alkoxysilyl-substituted styrenes: Synthesis of monomers for luminescent polymers

Luminescent stilbenoid chromophores with diethoxysilane end groups are prepared via Heck reactions. Diethoxysilane-substituted styrenes are used as vinylic components, thus allowing the combined connection of the chromophore to the silane moiety with an extension of the π-system. Monodisperse oligo(phenylenevinylene)s of different conjugation lengths and bromine or iodine as reactive sites are used as coupling partners. Electrical and optical properties are tuned via the length of the conjugated system, electron withdrawing cyanide and electron donating alkoxy side chains, the latter guarantee high solubility of the final compounds.Dedicated to Prof. Dr. H. Ringsdorf on the occasion of his 75th birthday     

Synthesis and characterization of new thermally stable copoly(ester–amide)s from diester–dicarboxylic acids

Three new aromatic diester–dicarboxylic acids containing furan rings, namely, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-4,4^′-dicarboxylic acid, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-3,3^′-dicarboxylic acid and benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-naphthyl ester-2,2^′-dicarboxylic acid were synthesized by the reaction of benzofuro[2,3-b]benzofuran-2,9-dicarbonyl chloride with 4-hydroxybenzoic acid, 3-hydroxybenzoic acid and 3-hydroxy-naphthalene-2-carboxylic acid, respectively. Diester–dicarboxylic acids were characterized by FT-IR and NMR spectroscopy and elemental analyses. Then, these monomers were converted to aromatic copoly(ester–amide)s by their reaction with various aromatic diamines via the direct polycondensation. These polymers were characterized by viscosity measurements, solubility tests, FT-IR, Ultraviolet and ¹H-NMR spectroscopy and thermogravimetry. The polymers with inherent viscosities in the range of 0.16–0.37 dl/g in dimethyl sulfoxide at 30 °C were obtained in high yield. Most of them dissolved readily at room temperature in polar solvents. The synthesized copoly(ester–amide)s possessed glass-transition temperatures from 210–255 °C. The copoly(ester–amide)s exhibited excellent thermal stabilities and had 10% weight loss at temperature above 295 °C under nitrogen atmosphere.     

Magnetic phase transitions in nanostructures induced by shear stress under high pressure

Magnetic phase transitions of the first and second order were revealed by Mössbauer spectroscopy in nanosystems of - and -ferric oxides and metallic europium subjected to shear stress (240°) under high pressure (20 kbar). For - and -ferric oxide nanoclusters, the Curie (Neel) points decreased to 300 K, whereas for nanostructured europium the Neel point increased from 90 to 100 K. The thermodynamic model of magnetic phase transitions predicting a change in the character of magnetic phase transitions and a decrease (increase) in the critical Neel (Curie) points in nanoclusters was developed. The type of magnetic phase transitions and the change in the critical points were caused by defects in nanoclusters, whose maximum concentration was observed for the clusters with the 20—50 nm size range.     

Rapid Mo(CO)6 catalysed one-pot deoxygenation of heterocyclic halo-benzyl alcohols with Lawesson’s reagent

A fast and efficient microwave promoted one-pot method for deoxygenation of heterocyclic halo-benzyl alcohols has been developed. The method does not cause dehalogenation of the substrates and provides the deoxygenated products in high yield after only 30 min.     

First isolation of 1,3,2-dithiaphosphetane 2-sulfide

The treatment of tert-alkyl phenyl thioketones with Lawesson’s reagent (LR) gave two diastereomeric 1,3,2-dithiaphosphetane 2-sulfides in high yields. The structure of one of the major diastereomers was determined by X-ray crystallography. The reaction of 2-adamantanethione with LR yielded the corresponding spiro-1,3,2-dithiaphosphetane 2-sulfide derivative in 87% yield.     

Laser technology application: Deformation and elastic recovery of semi-crystalline polymers

The elastic deformation-recovery and mechanical properties of semi-crystalline polymers (HDPE, LDPE and their blends) were investigated. An optoelectronic technique based on a laser beam was used to analyze the behavior of the samples under radial stress. The laser technology showed that the recovery process develops in two stages. The first one is governed by the elastic component and the second and slower one is controlled by the inelastic component of the material. At low deformation, the overall recovery is attributed to the development of structural micro-domains generated when shearing the amorphous segments of the polymer. The radial Young modulus was also determined and compared to unidirectional measurements. At low deformation both techniques provide very similar values; nevertheless, the radial Young modulus departs significantly from the unidirectional one when increasing the number of cycles of deformation-recovery.     

5,7′-(亚甲胺基)-二-8-羟基喹啉的合成及其理论研究

以4-甲基苯磺酸作催化剂、用三乙胺调节pH值约为9的条件下, 由5-甲酰基-8-羟基喹啉和5-氨基-8-羟基喹啉合成了新的5,7′-(亚甲胺基)-二-8-羟基喹啉, 利用IR, UV, ¹H NMR, MS确认了分子结构, 比较研究了其光致发光特性, 运用Gaussian 98量子化学程序包, 采用B3LYP密度泛函(DFT)的方法, 在6-31G(d,p)水平上对分子的几何构型进行结构优化; 并对目标化合物的稳定结构通过计算预测其振动光谱, 计算结果与实验值基本相符.