Stereochemistry of [4 + 2] Cycloadditions of Perfluorinated Selenocarbonyls to 1, 3‐Dienes

In completely stereospecific [4+2] cycloadditions, the perfluorinated selenocarbonyls 1 and 2 react both with trans‐trans‐2, 4‐hexadiene and cis‐trans‐2, 4‐hexadiene to yield 3, 6‐dihydro‐cis‐3, 6‐dimethyl‐2H‐selenapyrans 3 , 4a and 4b . The observed stereoselectivity leads to the conclusion, that the [4+2] cycloaddition of perfluorinated selenocarbonyls follows a concerted pathway. An identical mixture of isomers was isolated when using the precursor for 2 , trimethylstannyl (pentafluoroethyl)selane, which reacts with both 1, 3‐dienes over several weeks to form a mixture of syn‐2‐fluoro‐3, 6‐dihydro‐cis‐3, 6‐dimethyl‐2‐trifluoromethyl‐2H‐selenapyran ( 4a ) and anti‐2‐fluoro‐3, 6‐dihydro‐cis‐3, 6‐dimethyl‐2‐trifluoromethyl‐2H‐selenapyran ( 4b ) in the same ratio as found for 2 , thus proving the intermediate formation of Se=C(F)CF₃ ( 2 ). Complex 2D NMR experiments were used to distinguish the isomers 4a and 4b and to assign the ¹H, ¹³C and ¹⁹F NMR data of the selenaheterocycles.     

Separation and characterisation of sphingoceramides by high-performance liquid chromatography-electrospray ionisation mass spectrometry

We developed a simple and reliable analytical method for the quantification and the characterization of ceramides extracted from biological samples by high-performance liquid chromatography (HPLC) coupled to electrospray ionisation tandem mass spectrometry (ESI/MS/MS). The chromatographic separation of analytes was carried out in a RP8 column, eluting with a methanol-water mixture in gradient elution mode. The separated lipids were detected by total ion monitoring and characterised by MS/MS spectra; quantitative analysis was performed by integrating the extracted ion peaks obtained in the negative ion mode. Good repeatability was obtained for retention time (0.3-2%), peak area ratio (A(S)/A(IS), 2-8%), as well as limit of detection (LOD, 5-26 pg) and quantification (LOQ, 13-53 pg). The method was validated for the analysis of N-palmitoyl-D-erythro-sphingosine (Cer16), N-stearoyl-D-erythro-sphingosine (Cer18), N-tetracosanoyl-D-erythro-sphingosine (N24:0, lignoceric ceramide, Cer24:0), and N-tetracos-15'-enoyl-D-erythro-sphingosine (N24:1, nervonic ceramide, Cer24:1), giving good results. Lipid mixtures, extracted from skin and epidermal cells, were analysed for their content of the studied ceramides.     

Synthesis, structure and properties of SrAu3In3 and EuAu3In3—New indides with gold zig-zag chains

New indides SrAu₃In₃ and EuAu₃In₃ were synthesized by induction melting of the elements in sealed tantalum tubes. Both indides were characterized by X-ray diffraction on powders and single crystals. They crystallize with a new orthorhombic structure type: Pmmn, Z=2, a=455.26(9), b=775.9(2), c=904.9(2) pm, wR2=0.0425, 485 F² values for SrAu₃In₃ and a=454.2(2), b=768.1(6), c=907.3(6) pm, wR2=0.0495, 551 F² values for EuAu₃In₃ with 26 variables for each refinement. The gold and indium atoms build up three-dimensional [Au₃In₃] polyanionic networks, which leave distorted hexagonal channels for the strontium and europium atoms. Within the networks one observes Au2 atoms without Au-Au contacts and gold zig-zag chains (279 pm Au1-Au1 in EuAu₃In₃). The Au-In and In-In distances in EuAu₃In₃ range from 270 to 290 and from 305 to 355 pm. The europium atoms within the distorted hexagonal channels have coordination number 14 (8 Au+6 In). EuAu₃In₃ shows Curie-Weiss behavior above 50 K with an experimental magnetic moment of 8.1(1) μB/Eu atom. ¹⁵¹Eu Mössbauer spectra show a single signal at δ=−11.31(1) mm/s, compatible with divalent europium. No magnetic ordering was detected down to 3 K.     

Flavonoids in Leguminosae: analysis of extracts of T. pratense L., T. dubium L., T. repens L., and L. corniculatus L. leaves using liquid chromatography with UV, mass spectrometric and fluorescence detection

Reversed-phase LC on C-18 bonded silica with a methanol–ammonium formate gradient was used to determine the main flavonoids in leaves of four species of the Leguminosae family. The detection modes were diode-array UV absorbance, fluorescence, and (tandem) mass spectrometry. LC–UV was used for a general screening, sub-classification, and the calculation of total flavonoid contents. LC–FLU was included to identify isoflavones on the basis of their native fluorescence. Most structural information regarding aglycons, sugar moieties, and acidic groups was derived from LC–MS in both the full-scan and extracted-ion mode, using negative-ion atmospheric pressure chemical ionization. MS/MS did not provide much additional information, because the same fragments were observed as in full-scan MS.In T. pratense and T. repens, the main constituents were flavonoid glucoside–(di)malonates, while T. dubium and L. corniculatus mainly contained flavonoid (di)glycosides. Satellite sets comprising an aglycon, the glucoside and glucoside–malonates or –acetates, were abundantly present only in T. pratense. Generally speaking, the main aglycons and sugars in the four plant species are surprisingly different. In addition, while the results for T. pratense are similar to those reported in the literature, there is little agreement in the case of the other species. Finally, total flavonoid contents ranged from 50–65 mg/g for L. corniculatus and T. dubium, to 15 mg/g for T. pratense and only 1 mg/g for T. repens.     

Mass transfer determining parameter in facilitated transport through di-(2-ethylhexyl) dithiophosphoric acid activated composite membranes

Activated composite membranes (ACMs) containing di-(2-ethylhexyl) dithiophosphoric acid (D2EHDTPA) as a carrier have been found to facilitate the transport and separation of several cations. This paper describes an approach to the chemical characterisation of the transport phenomena of Zn²⁺, Cd²⁺, Cu²⁺, Ni²⁺, Sn²⁺ and In³⁺ by an ACM. The selectivity of D2EHDTPA based ACM towards different metal ions is presented and discussed focusing in Zn²⁺ and Cd²⁺ transport and recovery. Selectivity demonstrates that zinc ions are removable from mixtures due to the different extraction strength of D2EHDTPA. Such selectivity is based on the differences of the dynamic behaviour of the metal ions transport. In addition, a correlation of the chemical behaviour of those ACM systems with the corresponding solvent extraction systems has been found.     

Platination of [3-X-7,8-Ph2-7,8-nido-C2B9H8] (X=Et, F): Synthesis and characterisation of slipped and 1,2→1,7 isomerised products

The reaction of the labelled carborane ligand [3-Et-7,8-Ph₂-7,8-nido-C₂B₉H₈]²⁻ with a source of {Pt(PMe₂Ph)₂}²⁺ affords non-isomerised 1,2-Ph₂-3,3-(PMe₂Ph)₂-6-Et-3,1,2-closo-PtC₂B₉H₈ (1). The analogous reaction between [3-F-7,8-Ph₂-7,8-nido-C₂B₉H₈]²⁻ and {Pt(PMe₂Ph)₂}²⁺ yields 1,8-Ph₂-2,2-(PMe₂Ph)₂-4-F-2,1,8-closo-PtC₂B₉H₈ (3). Compound 1 has a heavily slipped structure (Δ 0.72 Å), which to some degree obviates the need for C atom isomerisation. However, that it is a kinetic product of the reaction is evident from the fact that it reverts to isomerised 1,8-Ph₂-2,2-(PMe₂Ph)₂-4-Et-2,1,8-closo-PtC₂B₉H₈ (2) slowly at room temperature but more rapidly with gentle warming. The heteroatom and labelled-B atom positions in the isomerised compounds 2 and 3 may be explained most simply by the rotation of a CB₂ face of an intermediate based on the structure of 1. Compounds 1–3 were characterised by a combination of spectroscopic and crystallographic techniques.     

Thermodynamic parameters of liquid ternary Fe1−x(Ni5/6Cr1/6)x alloys

Summary Computer-aidedKnudsen cell mass spectrometry is used for thermodynamic investigations on liquid ternary Fe_1–x(Ni_5/6Cr_1/6)_x alloys. The thermodynamic excess properties have been determined by means of the Digital Intensity-Ratio (DIR) method. Liquid ternary Fe_1–x(Ni_5/6Cr_1/6)_x alloys are characterized by exothermic molar heats of mixingH ^E, negative molar excessGibbs energiesG ^E, and negative molar excess entropiesS ^E. At 1850 K, the minimumH ^E value is –3120 J/mol (42.3 at.% Fe), the minimumG ^E value is –2540 J/mol (30 at.% Fe), and the minimumS ^E value is –0.44 J/(mol K) (60 at.% Fe). At 1850 K, the thermodynamic activities of Fe show slight negative deviations from the ideal behaviour for alloys with a Fe-content of less than 75 at.%, and ideal behaviour for the Fe-rich alloys (x _Fe>0.75).

---

Thermodynamische Parameter flüssiger ternärer Fe_1–x(Ni_5/6Cr_1/6)_x-Legierungen

Zusammenfassung Die Thermodynamik flüssiger ternärer Fe_1–x(Ni_5/6Cr_1/6)_x-Legierungen wurde mit Hilfe der computerunterstützten Knudsenzellen-Massenspektrometrie studiert. Die thermodynamische Auswertung der experimentellen Untersuchungen erfolgte nach der digitalen Intensitätsverhältnismethode (DIR). Flüssige ternäre Fe_1–x(Ni_5/6Cr_1/6)_x-Legierungen zeigen exotherme molare MischungswärmenH ^E, negative molareGibbssche ZusatzenergienG ^E, und negative molare ZusatzentropienS ^E. Bei 1850 K sind die Minimumswerte fürH ^E –3120 J/mol (42.3 At.% Fe), fürG ^E –2540 J/mol (30 At.% Fe) und fürS ^E –0.44 J/(mol K) (60 At.% Fe). Bei 1850 K zeigen die thermodynamischen Aktivitäten von Fe bei Legierungen mit einem Fe-Gehalt von höchstens 75 At.% leichte negative Abweichungen vom idealen Verhalten, die Fe-reichsten Legierungen (x _Fe>0.75) verhalten sich hingegen nahezu ideal.

     

Komplexe von Vanadium und Titan mit Salicylaldehyd-benzoylhydrazon und 2-(2′-Hydroxyphenyl)-chinolin-8-ol. Kristallstruktur von μ-Oxo-bis[oxo{2-(2′-Hydroxyphenyl)-chinolin-8-olato(2-)}-vanadium(V)]

Complexes of Vanadium and Titanium with Salicylaldehyde benzoylhydrazone and 2-(2′-Hydroxyphenyl)-8-quinolinol. Crystal Structure of μ-Oxo-bis[oxo{2-(2′-hydroxyphenyl)-8-quinolinato(2-)}-vanadium(V)] . By reaction of titanium(IV)-isopropoxide and bis(acetylacetonato)-oxovanadium(IV) with salicylaldehyde benzoylhydrazone and 2-(2′hydroxyphenyl)-8-quinolinol, respectively, the metal complexes of the tridentate diacidic ligands were synthesized and characterized mass spectrometrically. The mass spectra of the titanium compounds correspond to the expected bisligand complexes whereas several species are demonstrable in the case of vanadium. Crystals of μ-oxo-bis[oxo{2-(2′-hydroxyphenyl)-8-quinolinolato(2-)}-vanadium(V)] were isolated and characterized by X-ray structural analysis. The complex exhibits C₂ symmetry, accordingly the μ₂-oxygen atom is situated on the 4 axis. The VOV bridge is angular with the unusually small bond angle of 107.3°. The coordination polyhedron is distorted octahedral. The compound additionally contains one molecule of chloroform per formula unit which is disordered in two positions. Crystallographic data see “Inhaltsübersicht”.     

Oral malodor,assessed by closed-loop,gas chromatography,and ion-trap technology

A method is described for the analysis of volatile organic compounds in saliva and tongue coating samples. The techniue is based on an off-line preconcentration step by means of a closed-loop trapping system followed by gas chromatography-ion trap detection. With the closed-loop technique, the volatile organic compounds(VOCs) are released from the matrix and trapped on an adsorbent without interference of water. The VOCs are released from the adsorbent into the gas chromatograph by thermdesorption. After separation, identification of the compounds is performed by ion trap technology. By this technique 82 compounds could be demonstrated in saliva and tongue coating samples. The technique is also used to demonstrate the formation of volatile bacterial fermentation compounds when a protein substrate is added to tongue coating samples. It is considered a very promising tool in further research on oral malodor.