The Photochemistry of Ch3I in Various Matrices at Low Temperature

The photodissociation of methyl iodide in various matrices at low temperature was studied. The observed Raman spectra excited by 514.5 nm laser radiation showed that there were two different photolytically produced iodine species isolated in the matrices after illumination by a medium pressure mercury lamp. One species which was dominant at lower iodine concentrations and exhibited a progression with an ωe of 201 cm^?1, belonged to the matrix isolated iodine monomer (I₂). The other species, which was dominant at higher iodine concentrations with an ω_e of approximately 180 cm^?1, belonged to the iodine aggregate ((I₂)_n). Five progressions of resonance Raman or resonance fluorescence of these two species were also observed in the other matrices. The iodine aggregate in the methyl iodide matrix at 77 K was formed in a crystalline structure, while the photolytically generated iodine aggregate from CH₃I/Ar (2/3) matrix at 10 K, after illumination with a mercury lamp, was in amorphous form. The rearrangement of photolytically produced iodine aggregate in methyl iodide matrix was observed as a function of the duration of illumination. Local heating effects of the laser radiation might induce the iodine monomer to aggregate in matrices. The photodissociation mechanism of methyl iodide in matrices is also proposed.     

Capillary and packed column SFC/MS

A frit restrictor interface for capillary column supercritical fluid chromatography/mass spectrometry (SFC/MS) has been constructed and used for the analysis of high boiling point alkanes. Packed column SFC/MS is described using both a moving belt liquid chromatographic/mass spectrometric interface and a thermospray source in the filament-on mode.     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.     

Spectroscopic characterization of alkaline earth uranyl carbonates

A series of alkaline uranyl carbonates, M[UO₂(CO₃)₃]·nH₂O (M=Mg₂, Ca₂, Sr₂, Ba₂, Na₂Ca, and CaMg) was synthesized and characterized by inductively coupled plasma mass spectrometry (ICP-MS) and atomic absorption spectrometry (AAS) after nitric acid digestion, X-ray powder diffraction (XRD), and thermal analysis (TGA/DTA). The molecular structure of these compounds was characterized by extended X-ray absorption fine-structure (EXAFS) spectroscopy and X-ray photoelectron spectroscopy (XPS). Crystalline Ba₂[UO₂(CO₃)₃]·6H₂O was obtained for the first time. The EXAFS analysis showed that this compound consists of (UO₂)(CO₃)₃ clusters similar to the other alkaline earth uranyl carbonates. The average U-Ba distance is 3.90±0.02 Å.Fluorescence wavelengths and life times were measured using time-resolved laser-induced fluorescence spectroscopy (TRLFS). The U-O bond distances determined by EXAFS, TRLFS, XPS, and Raman spectroscopy agree within the experimental uncertainties. The spectroscopic signatures observed could be useful for identifying uranyl carbonate species adsorbed on mineral surfaces.     

A sensitive and specific HPLC-MS method for the determination of sophoridine,sophocarpine and matrine in rabbit plasma

A sensitive and specific method was developed for the determination of sophoridine (SRI), sophocarpine (SC) and matrine (MT) in rabbit plasma by HPLC-MS. After an administration of Kuhuang by injection, blood samples were collected and extracted with methanol. The extract solutions were analysed by HPLC-MS method. The separation was performed on a ZORBAX Extend-C18 column using methanol/water/diethylamine (50:50:0.07, v/v/v) as mobile phase. The quinolizidine alkaloids were detected by using mass spectrometry in the SIM mode. There was a good linear relationship between peak area and concentration of analytes over the concentration range of 13.2–995.0 ng mL^–1 for SRI, 7.0–530.0 ng mL^–1 for SC and 8.8–655.0 ng mL^–1 for MT, respectively. The absolute recovery of this method was more than 57% for SRI, 87% for SC and 91% for MT. The accuracy of assay was more than 90%. The limits of detection (LODs) were 6.8 ng mL^–1 for SRI, 3.5 ng mL^–1 for SC and 4.2 ng mL^–1 for MT, respectively. The limits of quantitation (LOQs) were 13.2 ng mL^–1 for SRI, 7.0 ng mL^–1 for SC and 8.8 ng mL^–1 for MT, respectively. The intra-day and inter-day coefficients of variation (RSDs) were less than 10.1, 6.3 and 5.8% for SRI, SC and MT, respectively. The developed method was applied to determine the concentration–time profiles of SRI, SC and MT in rabbit plasma after injection of Kuhuang.     

Rapid stereoselective separations of amphetamine derivatives with highly sulfated gamma-cyclodextrin

The highly sulfated gamma-CD (HS-gamma-CD) is a chiral selector widely used in CE for the enantioseparation of pharmaceutical compounds. This paper investigated different approaches to reduce the stereoselective analysis time of amphetamine (AT) derivatives according to the chiral selector concentration in the BGE. With high HS-gamma-CD concentration, tested analytes were separated in 3.5 min as anionic complexes with short-end injection technique in reversed polarity mode. However, this procedure presented some limitations in terms of efficiency and resolution, excessive Joule heating and poor compatibility with MS detection. With low HS-gamma-CD concentration, compounds were separated as cations. Conventional approaches to reduce CE analysis time demonstrated critical resolution between some analytes. Therefore, the use of the partial-filling technique compatible with MS detection was carried out. Under optimized conditions, the analysis time for the chiral separation of seven AT like compounds was reduced to 6 min. Moreover, sensitivity of CE-MS was sufficient for the determination of ATs in plasma following a simple liquid-liquid extraction.     

Spectroscopy, NMR and DFT studies on molecular recognition of crown ether bridged chiral heterotrinuclear salen Zn(II) complex

A barium-containing crown ether bridged chiral heterotrinuclear salen Zn(II) complex BaZn2L(ClO4)2, where L is a folded dinuclear chiral (R,R)-salen ligand, has been synthesized and characterized by elemental analysis, 1H NMR, UV-vis, IR, circular dichroism (CD) spectra, and mass spectra. As a folded dinuclear chiral host, its recognition with achiral guests (imidazole derivatives), rigid bidentate guest (1,4-diazobicyclo[2,2,2]octane, DABCO) and chiral guests (amino acid methyl esters) was investigated by means of UV-vis spectrophotometric titration, CD spectra. The association constants of D-amino acid methyl esters are found to be higher than those of their L-enantiomer. The sandwich-type binding of BaZn2L(ClO4)2-DABCO supramolecular assembly was specially studied via 1H NMR titration and 1H ROESY. To understand the recognition on molecular level, density functional theory (DFT) calculations on B3LYP/LanL2DZ were performed on the minimal energy conformations of host, guests, and host-guest complexes. The minimal energy conformations were obtained by molecular mechanics (MM) optimization and molecular dynamics (MD) simulation. The results of single point energy, HOMO energy, and charges transfer were analyzed. The results of theoretical calculations are in good agreement with the experimental data.     

Feed additives in animal nutrition: Quantification of a new adrenergic drug by hyphenated techniques

Zilpaterol, (±)‐trans‐4,5,6,7‐tetrahydro‐7‐hydroxy‐6‐(isopropylamino) imidazo [4,5,1‐jk]‐[1]benzazepin‐2(1H)‐one, is an adrenergic agonist drug licensed in Mexico and South Africa as feed additive for cattle at slaughter age. In contrast, the EU legislative framework prohibits the use of beta‐agonists as growth promoters to produce lean meat. In this study, the compound was quantified as its TMS derivative both by gas chromatography‐mass spectrometry (GC‐MS) with a quadrupole detector (QUADR) and by GC‐MS/MS with an ion trap detector (ITD), in Electron Impact (EI) ionization. Subsequently, an extraction and clean‐up procedure for the identification of Zilpaterol in commercial feeds was set up. Different extraction solvents and matrices were considered for their influence on Zilpaterol yield. The analytical method led to good recoveries and limits of detection and quantification in feeds well below the 5–20 μg/g dose proposed for animal nutrition.     

Determination of uranium in marine sediment pore waters by isotope dilution inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) was used in an isotope dilution mode to assay small-volume (0.25 ml) sediment pore waters for their uranium contents, using ²³⁶U as the spike. The only pretreatment required was a simple dilution by a factor of 20, which gave sufficient volume for three replicate analyses per sample. Rapid and accurate results were obtained for a variety of samples and standards, ranging in concentration from 0.05 to 10 ng U ml^?1. A suite of 30 samples can be analysed in less than 6 h by this method. The relative standard deviation was better than 1.9%, with a detection limit, based on 3σ background, of 2 pg U ml^?1 in solution (40 pg ml^?1 in samples). Sea water is a difficult matrix for ICP-MS and thus the method is generally suitable for uranium determinations in many other sample solutions.     

A generic approach to the impurity profiling of drugs using standardised and independent capillary zone electrophoresis methods coupled to electrospray ionisation mass spectrometry

Three standardised, capillary zone electrophoresis-electrospray ionisation mass spectrometry (CZE-ESI-MS) methods were developed for the analysis of six drug candidates and their respective process-related impurities comprising a total of 22 analytes with a range of functional groups and lipophilicities. The selected background electrolyte conditions were found to be: 60/40 v/v 10 mM ammonium formate pH 3.5/organic, 60/40 v/v 10 mM ammonium acetate pH 7.0/organic and 10 mM piperidine, pH 10.5, where the organic solvent is 50/50 v/v methanol/acetonitrile. The coaxial sheath flow consisted of either 0.1% v/v formic acid in 50/50 v/v methanol/water, or 10 mM ammonium acetate in 50/50 v/v methanol/water, depending on the mixture being analysed. Factor analysis and informational theory were used to quantify the orthogonality of the methods and predict their complementarities. The three selected CZE-ESI-MS methods allowed the identification of 21 out of 22 of all the drug candidates and their process-related impurities and provided orthogonality with four established high-performance liquid chromatography-mass spectrometry (HPLC-MS) methods. These methodologies therefore form the basis of a generic approach to impurity profiling of pharmaceutical drug candidates and can be applied with little or no analytical method development, thereby offering significant resource and time savings.