The use of solid sorbents for direct accumulation of organic compounds from water matrices–a review of solid-phase extraction techniques

The main principles of solid-phase extraction techniques are reviewed in this paper. Various solid sorbents can be used as a suitable trap for direct accumulation of organic compounds from aqueous solutions. The trapped analytes can be desorbed by elution with suitably chosen liquid phases. These preconcentration procedures can be considered as low performance liquid chromatography and the efficiency of the procedure can thus be related to the retention characteristics of the preconcentration column. The main sorbents used for trace enrichment purposes are also reviewed. Besides, the concise methodology, sample storage, and automation are discussed. The advantages of solid phase extraction as compared to liquid-liquid extraction are given as well as some drawbacks of this method.     

Elution of Cationic Species with/without Ion Pair Reagents from Polar Stationary Phases via SFC

Traditionally, the application of supercritical fluid chromatography has been limited to compounds of relatively low polarity. Thus, we report here that one secondary amine and two quaternary amine salts were successfully eluted from a Deltabond Cyano-bonded silica column with the addition of sodium alkylsulfonate to the methanol-modified, carbon dioxide-based mobile phase. A possible ion-pairing interaction between the positively charged analytes and the anionic part of the sulfonate additive has been proposed. In another set of experiments, the three amine salts readily eluted from both Ethyl-pyridine-bonded silica and Amino-bonded silica phases without the need of additive although the peak shapes were less than desirable. The addition of sulfonate salt to the mobile phase again sharpened the peaks. In the presence of a mixture of methanol and CO₂, we suggest that these stationary phases are positively charged. We describe here also for the first time the employment of a strong silica-based anion exchange (SAX) column for supercritical fluid separation of cationic species. Two elution mechanisms were proposed for the three amine salts depending upon whether the ionic additive was incorporated into the mobile phase. Separation as the ion-pair was proposed with an ionic additive in the mobile phase; whereas separation of the intact amine salt from the positively charged basic stationary phases was suggested to be operational without the ionic additive.     

Chemical applications of topology and group theory

The 60 even permutations of the ligands in the five-coordinate complexes, ML ₅, form the alternating group A ₅, which is isomorphic with the icosahedral pure rotation group I. Using this idea, it is shown how a regular icosahedron can be used as a topological representation for isomerizations of the five-coordinate complexes, ML ₅, involving only even permutations if the five ligands L correspond either to the five nested octahedra with vertices located at the midpoints of the 30 edges of the icosahedron or to the five regular tetrahedra with vertices located at the midpoints of the 20 faces of the icosahedron. However, the 120 total permutations of the ligands in five-coordinate complexes ML ₅ cannot be analogously represented by operations in the full icosahedral point group I _h, since I _his the direct product I×C₂ whereas the symmetric group S ₅ is only the semi-direct product A ₅S₂. In connection with previously used topological representations on isomerism in five-coordinate complexes, it is noted that the automorphism groups of the Petersen graph and the Desargues-Levi graph are isomorphic to the symmetric group S ₅ and to the direct product S ₅×S ₂, respectively. Applications to various fields of chemistry are briefly outlined.     

Synthesis of three-layered titanates BaLn<Subscript>2</Subscript>Ti<Subscript>3</Subscript>O<Subscript>10</Subscript> in systems with coprecipitated hydroxocarbonates

The synthesis of three-layered titanates BaLn₂Ti₃O₁₀ (Ln = La, Nd, Sm) in systems with coprecipitated hydroxocarbonates was studied. It was established that they are formed through an intermediate phase with a defective perovskite structure followed by its transformation into the three-layered structure by the ordering of vacancies and rare-earth element and barium atoms and subdivision into three-layered blocks. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 6, pp. 349–353, November–December, 2007.     

Determination of various deformation processes in impact-modified PMMA at strain rates up to 105%/min

The deformation processes in impact-modified PMMA, which deforms homogeneously, were determined by means of the stress/strain experiment (, ) with simultaneous lateral strain measurement (_lat) in a wide range of strain rates () up to 10⁵%/min (impact stress). The elastic, plastic cavitation and plastic shear processes were determined as a function of strain. Therefore we calculated the elastic strain ( _el), the elastic volume expansion ( _{vol el}), the cavitation strain ( _cav), which is identical with the plastic volume expansion ( _{vol pl}), the shear strain ( _sh) and the energy densities (W_el, W_cav, W_sh) related to these three processes.For strains of 3 % onward it was found that plastic shear processes and plastic cavitation processes are responsible for a partial loss of elastically stored energy. Both plastic processes turn out to be mostly anelastic deformations, their amount depending strongly on the strain rate. The contributions of the processes to the total deformation of the unmodified PMMA in its strain range are similar to those of the impact-modified PMMA, and the high impact strength is caused by a shift of the catastrophic rupture to very high strains.     

Photogeneration of Silver Particles in PVA Fibers and Films

Fibers and films prepared from blends of poly(vinyl alcohol) and poly(acrylic acid) were found to be suitable matrices for the solid-state photoreduction of silver ions in the presence of air. Fast generation of nanometer-sized silver crystallites was observed when fibers of polymer blends crosslinked with dimethyl sulfoxide were irradiated with 350nm light. Optical determinations of the formation kinetics were carried out using thin films of noncrosslinked as well as lightly and heavily crosslinked polymer blends. Small Ag clusters were detected initially, which were stable in the dark but transformed into larger metal particles upon further illumination. Both formation processes occurred only under high light intensity illumination and the kinetic data were inconsistent with monophotonic mechanisms.     

A review ofL=λW and extensions

A fundamental principle of queueing theory isL=W (Little's law), which states that the time-average or expected time-stationary number of customers in a system is equal to the product of the arrival rate and the customer-average or expected customer-stationary time each customer spends in the system. This principle is now well known and frequently applied. However, in recent years there have been extensions, such as H=G and the continuous, distributional, ordinal and central-limit-theorem versions, which show that theL=W relation, when viewed properly, has much more power than was previously realized. Moreover, connections have been established between H=G and other fundamental relations, such as the rate conservation law and PASTA (Poisson arrivals see time averages), which show that there is a much greater unity in the overall theory than was previously realized. This paper provides a review.This paper is dedicated to the memory of our colleague Professor Peter Franken (1937–1989), who contributed greatly to the subject of this paper and to queueing theory more generally.     

Probability theory and polymer physics

This study applies the theory of stochastic processes to the equilibrium statistical physics of polymers in solution. The topics treated include random copolymers and randomly branching polymers, with self-consistent mean field effects. A new and more natural way of dealing with Boltzmann weighting is discussed, which makes it possible from the beginning of a calculation to consider only the physical polymer conformations. We also show that in general the random copolymer problem can be reduced to the ordinary polymer problem, and treat the self-consistent field problem for a general branching polymer.     

Fractional noise

Fractional noiseN(t),t 0, is a stochastic process for every , and is defined as the fractional derivative or fractional integral of white noise. For = 1 we recover Brownian motion and for = 1/2 we findf ^–1-noise. For 1/2 1, a superposition of fractional noise is related to the fractional diffusion equation.