非有机溶剂萃取催化光度法测定锰Mn(Ⅱ)-H2O2-EBT-PEG-2000体系

研究了碱性介质中,利用锰(Ⅱ)催化过氧化氢氧化铬黑T的指示反应。用聚乙二醇-2000非有机溶剂萃取平衡控制反应时间和指示反应进行的程度。通过测量酸性条件下539nm处聚乙二醇-2000相的吸光度,建立了非有机溶剂萃取催化光度法测定痕量锰(Ⅱ)的新方法。方法的线性范围为0.0080~0.55μg.mL-1,检测限为3.0×10-9g.L-1,可用于铝合金、茶叶样品中锰的测定。     

扩张环上的$\Sigma$-相伴素理想

作为对相伴素理想与幂零相伴素理想的推广,我们在本文中引进了$\Sigma$-相伴素理想的定义,探讨了$\Sigma$-相伴素理想的基本性质,证明了Ore扩张环$R[x;\alpha,\delta]$、斜洛朗多项式环$R[x,x^{-1};\alpha]$及斜幂级数环$R[[x;\alpha]]$的$\Sigma$-相伴素理想都分别可以用环$R$的$\Sigma$-相伴素理想来刻画,从而将相伴素理想与幂零相伴素理想的一些已有结论推广到更一般的情形.     

X射线荧光光谱法测定烧结锰矿中的主次量成分

采用四硼酸锂和偏硼酸锂混合熔剂熔融法制样,X射线荧光光谱法测定了烧结锰矿中的MnO、Fe2O3、SiO2、Al2O3、TiO2、CaO、MgO、SO3和P2O59个主次量成分。以12个锰矿石标准样品建立校准曲线,用理论α系数法校正基体效应。测定烧结锰矿样品各成分的相对标准偏差(RSD,n=10)在0.26%—3.94%之间。用实际样品验证,测定结果与化学方法的测定值相符。与化学法相比,该方法具有快速、简便、精密度好和准确度高等优点。     

Study of the initial stage of manganese dioxide electrodeposition on a rotating ring-disk electrode

The initial stage of electrodeposition of manganese dioxide has been studied on the platinum disk electrode and on the ring-disk electrode. Two current maxima were observed on the anodic voltammograms. It has been shown that the first rise in the current is associated with the formation of manganese dioxide (MD) nuclei on the electrode surface, and the second with their growth at the border between MnO₂ and bare platinum due to an increase in the perimeter of the nuclei. Electrodeposition on bare platinum proceeds at a higher rate than on the surface of growing MD. This is explained by the difference in the reaction mechanisms on these substrates. The first stage of the process on the growing MD is the chemisorption of Mn(II) ions with the formation of Mn(III) ions, which are then electrochemically oxidized to MD. Chemisorption is the slowest step in the whole process.     

[(TeMe2)Mn(CO)4(μ5-Te)(μ4-Te)Mn4(CO)12]−: A Pentacoordinate Bridging Tellurido Ligand in a Square-Pyramidal Geometry

The first Te–Mn–CO clusters were obtained by the thermal reaction of K₂TeO₃ with [Mn₂(CO)₁₀] in MeOH. The basicity of the μ₄-Te ligand in the octahedral cluster anion [(μ₄-Te)₂Mn₄(CO)₁₂]²⁻ is demonstrated by its binding to the fragment [(TeMe₂)Mn(CO)₄]⁺ in an axial fashion to afford the novel cluster 1 .     

Synthesis of deacetyl-1,10-didehydrosalvinorin G

To unambiguously confirm the actual product in autoxidation of salvinorin A under basic conditions, deacetyl-1,10-didehydrosalvinorin G was synthesized from salvinorin C via intermediate salvinorin H. Furthermore, oxidation of salvinorin D with manganese dioxide gave salvinorin G in good yield.     

Manganese(II) Complexes with Bridging Selenidoarsenate(III) Anions [AsSe2(Se2)]3− and [(AsSe2)2(μ‐Se2)]4−

Solvothermal reaction of [MnCl₂(terpy)] with elemental As and Se at a 1:1:2 molar ratio in H₂O/trien (10:1) at 150 °C affords the linear trimanganese(II) complex [{Mn(terpy)}₃(μ‐AsSe₄)₂] ( 1 ). The tridentate [AsSe₂(Se₂)]^3? anions of 1 chelate the terminal {Mn(terpy)}²⁺ fragments and bridge these through their remaining Se atom to the central {Mn(terpy)}²⁺ moiety. Weak interactions of Mn1···Se and Mn3···Se bonds with length 2.914(7) and 3.000(7) Å link the molecules of 1 into infinite chains. Treatment of [MnCl₂(cyclam)]Cl with As and Se at a 1:1:2 molar ratio in superheated H₂O/CH₃OH (1:1) at 150 °C yields the dinuclear complex [{Mn(cyclam)}₂ (μ‐As₂Se₆)] ( 2 ), whose novel [(AsSe₂)₂(μ‐Se₂)]^4? ligands bridge the Mn^II atoms in a μ‐1κ²Se¹, Se²: 2κ²Se⁵,Se⁶ manner.     

Layered metal phosphonates containing pyridyl groups: Syntheses and characterization of Mn2(2-C5H4NPO3)2(H2O) and Zn(6-Me-2-C5H4NPO3)

This paper reports the syntheses and characterization of two phosphonate compounds with layered structures, namely, Mn₂(2-C₅H₄NPO₃)₂(H₂O) (1) and Zn(6-Me-2-C₅H₄NPO₃) (2). In compound 1, double chains are found in which the {Mn₂O₂} dimers are linked by both aqua and O-P-O bridges. These double chains are connected through corner-sharing of {MnO₅N} octahedra and {CPO₃} tetrahedra, forming an inorganic layer. The pyridyl groups fill the inter-layer spaces. In compound 2, each {ZnO₃N} tetrahedron is vertex-shared with three {CPO₃} tetrahedra and vice versa, hence forming an inorganic honeycomb layer. The pyridyl groups reside between the layers. Magnetic studies show that weak antiferromagnetic interactions are mediated between the manganese ions in compound 1. Crystal data for 1: monoclinic, space group C2/c, , , , β=107.3(1)°. For 2: orthorhombic, space group Pbca, , , .     

Investigations of the catalytic properties of manganese oxides for the oxygen reduction reaction in alkaline media

The oxygen reduction reaction (ORR) was studied in KOH electrolyte on different manganese oxides, dispersed on a carbon powder (MnO_x/C). The oxides were prepared by different methods, for producing MnO, Mn₃O₄ and MnO₂ as major phases dispersed on the Vulcan XC-72 carbon. The oxides were characterized by XRD (X-ray diffraction) and in situ XANES (X-ray absorption near edge structure). The electrochemical measurements were made using cyclic voltammetry and steady state polarization curves carried out in an ultra-thin layer rotating ring/disk electrode. The results have shown lower activity for the ORR on the MnO_x/C species compared to that on Pt/C, but higher activity compared to that of pure Vulcan carbon. Formation of involving 2e⁻ per O₂ molecule is the main path of the ORR in the studied MnO_x/C catalysts but, at low overpotentials and rotation rates the number of electrons is raised to 4 due to the occurrence of a disproportionation reaction. Large differences of electrocatalytic activity were seen for the different oxide species, and these were related to the presence of a Mn(IV) phase and the occurrence of a mediation processes involving the reduction of Mn(IV) to Mn(III), followed by the electron transfer of Mn(III) to oxygen.     

Zr 改性MnOx/MWCNTs催化剂的结构特征与低温SCR活性

以ZrO（NO₃）₂·2H₂O为前驱体对多壁碳纳米管（MWCNTs）进行了改性并负载MnO_x制备了MnO_x/ZrO₂/MWCNTs 催化剂. 考察了Zr 对催化剂低温选择性催化还原（SCR）反应活性的影响,并通过多种分析手段对催化剂的结构进行了表征. 结果表明Zr 的添加对催化剂的低温SCR活性具有显著的促进作用,当Zr 负载量为30%时,催化剂活性最佳. X射线衍射（XRD）、拉曼（Raman）光谱、透射电镜（TEM）、N₂吸附-脱附的表征结果分析表明,适量的Zr 改性促进了MnO_x在载体表面的分散,增强金属氧化物与MWCNTs 之间的作用,也能增加催化剂的比表面积、孔容和孔径. X 射线光电子能谱（XPS）、H₂程序升温还原（H₂-TPR）和NH₃程序升温脱附（NH₃-TPD）的分析结果则显示,Zr 能提高催化剂表面化学吸附氧浓度,促进Mn³⁺转化为Mn⁴⁺,从而使催化剂表面的活性位点增多,氧化还原能力增强,同时还提高了催化剂表面酸性位点的数量和强度,促进了NH₃的吸附,是MnO_x/ZrO₂/MWCNTs 催化剂低温SCR活性提高的主要原因.