一种N-酰肌氨酸在四氧化三铁纳米颗粒表面的吸附特征

根据表面活性剂固液界面吸附理论和表面改性颗粒亲水疏水特性及红外光谱分析,提出了不同四条件和表面活性剂用量下不同的吸附模型。     

Studies of poly-<Emphasis Type="Italic">L</Emphasis>-lysine-starch nanoparticle preparation and its application as gene carrier

Anion starch nanoparticle (StNP) with a diameter of 50 nm was prepared in water-in-oil microemulsion, with soluble starch as raw materials and POCl₃ as crosslinking agent. PLL-StNP was prepared by linking poly-L-lysine (PLL) on the surface of StNP. At the same time, the size of PLL-StNP and its stability in aqueous solution were checked by AFM. The analysis of plasmid DNA binding, DNase I enzymatic degradation, toxicity and transfection were done. We discovered that PLL-StNP may be used as non-virus nanoparticle gene carrier. And we developed the method of preparing PLL-StNP gene carrier and used it in cell transfection. As non-virus gene carrier, PLL-StNP has some advantages, such as large load of DNA, high transfection efficiency, low cell toxicity and biodegradability.     

Contribution of dimensional factor to the potential of copper-containing electron-ion exchangers

The average size of copper particles in copper-containing electron-ion exchangers is determined with the aid of microscopy and x-ray diffractometry. The results are used to calculate the contribution made by a dimensional factor to the electrode potential. Compared to the potential of compact copper, the potential shift in the negative direction measured experimentally falls within the region of calculated values. The average size of copper particles remains practically unchanged after contact with a copper sulfate solution, testifying to stabilization of an ultradisperse state of copper particles by a polymer matrix.     

甲醇重整反应中Pt/γ-Al2O3催化剂纳米Pt粒径与催化性能关系研究

利用硝基甲烷还原法在室温条件下得到了纳米Pt粒径可控的担载Pt/γ-Al₂O₃催化剂, 并利用甲醇重整反应为反应探针考察了Pt粒径与催化反应性能之间的关系, 发现催化反应的性能与担载贵金属颗粒粒径之间存在明显的相关性. 通过透射电镜(TEM)、X射线衍射(XRD)、程序升温还原(TPR)等测试手段对催化剂进行表征, 发现钠米Pt的粒径大小不但影响甲醇重整反应的活性, 同时也影响反应的选择性, 即催化剂的催化性能与担载贵金属粒径之间存在明显的尺度效应.     

Solid-contact potentiometric sensor for ascorbic acid based on cobalt phthalocyanine nanoparticles as ionophore

A novel solid-contact potentiometric sensor for ascorbic acid based on cobalt phthalocyanine nanoparticles (NanoCoPc) as ionophore was fabricated without any need of auxiliary materials (such as membrane matrix, plasticizer, and other additives). The electrode was prepared by simple drop-coating NanoCoPc colloid on the surface of a glassy carbon electrode. A smooth, bright and blue thin film was strongly attached on the surface of the glassy carbon electrode. The electrode showed high selectivity for ascorbic acid, as compared with many common anions. The influences of the amount of NanoCoPc at the electrode surface and pH on the response characteristics of the electrode were investigated. To overcome the instability of the formal potential of the coated wire electrode, a novel electrochemical pretreatment method was proposed for the potentiometric sensor based on redox mechanism. This resulting sensor demonstrates potentiometric response over a wide linear range of ascorbic acid concentration (5.5 × 10⁻⁷ to 5.5 × 10⁻² M) with a fast response (<15 s), lower detection limit (ca. 1.0 × 10⁻⁷ M), and a long-term stability. Furthermore, microsensors based on different conductors (carbon fiber and Cu wire) were also successfully fabricated for the determination of practical samples.     

Pt‐Nanoparticle Incorporated Carbon Paste Electrode for the Determination of Cu(II) Ion by Anodic Stripping Voltammetry

Pt‐nanoparticles were synthesized and introduced into a carbon paste electrode (CPE), and the resulting modified electrode was applied to the anodic stripping voltammetry of copper(II) ions. The synthesized Pt‐nanoparticles were characterized by cyclic voltammetry, scanning electron microscopy and X‐ray photoelectron spectroscopy techniques to confirm the purity and the size of the prepared Pt‐nanoparticles (ca. 20 nm). This incorporated material seems to act as catalysts with preconcentration sites for copper(II) species that enhances the sensitivity of Cu(II) ions to Cu(I) species at a deposition potential of ?0.6 V in an aqueous solution. The experimental conditions, such as, the electrode composition, pH of the solution, pre‐concentration time, were optimized for the determination of Cu(II) ion using as‐prepared electrode. The sensitivity changes on the different binder materials and the presence of surfactants in the test solution. The interference effect of the coexisted metals were also investigated. In the presence of surfactants, especially TritonX‐100, the Cu(II) detection limit was lowered to 3.9×10^?9 M. However, the Pt‐nanoparticle modified CPE begins to degrade when the period of deposition exceeds to 10 min. Linear response for copper(II) was found in the concentration range between 3.9×10^?8 M and 1.6×10^?6 M, with an estimated detection limit of 1.6×10^?8 M (1.0 ppb) and relative standard deviation was 4.2% (n=5).     

γ-Fe2O3纳米粉的低热固相制备及其电磁损耗特性(英)

The Fe(OH)₃ precursor was prepared by solid -state reaction with Fe(NO₃)₃·9H₂O, NaOH and dispersed poly-ethylene glycol at low heating temperature(25 ℃). Synthesis of iron oxide (γ-Fe₂O₃) nanoparticle was achieved by thermal decomposition of Fe(OH)₃·xH₂O precursor. The nanoparticle was characterized by TG-DTA, X-ray diffra-ction, TEM etc. The results showed that the nanoparticle was composed of γ-Fe₂O₃ and was a better absorber for electromagnetic wave within the low frequency band.     

Synthesis and Characterization of Ag2S Nanocrystals in Hyperbranched Polyurethane at Room Temperature

Ag₂S nanoparticles in hyperbranched polyurethane matrix were prepared through the in situ reaction with thioacetamide as the sulfur source at room temperature. Transmission electron microscopic analysis revealed a uniform spherical shape for Ag₂S nanoparticles, with an average size of about 4-10 nm and a narrow size distribution. X-ray powder diffraction and UV-vis spectroscopy were also used to characterize the obtained nanoparticles     

3—Mercaptopropionic Acid Capped Gold Nanoclusters：Quantized Capacitance in Aquesous Media

3-Mercaptopropionic acid monolayer protected gold nanoclusters (MPA-MPCs) were synthesized and characterized by transmission electorn microscopy,UV-Vis spectroscopy,X-ray photoelectron spectroscopy and Fourler transform infrared spectroscopy.The exact value of quantized double-layer capacitance of MPCs in aqueous media was obtained by differential pulse voltammograms.     

Uniform Rice-like CdS Particles Prepared from Water-in-oil Microemulsions

IntroductionNano-sized semiconductors are of great interestdue to their special optical and electronic proper-ties[1,2].As one of the mostimportantⅡ—Ⅵsemicon-ductors,CdS has importantapplications in many fields,such as the solar cell field,non linear o…