赖氨酸修饰壳聚糖磁性超微载体的制备和表征

本文设计并合成了良好水溶性的赖氨酸修饰壳聚糖,并对制备工艺进行了优化.产物通过红外(FTIR)和核磁(1H-NMR)进行了表征,并将其作为壳层材料制备了赖氨酸修饰壳聚糖磁性超微载体.通过光电能谱(XPS)、透射(TEM)、激光粒度仪、X射线衍射(XRD)、磁性能测试(VSM)对载体进行了表征.结果表明,制备的赖氨酸修饰壳聚糖磁性超微载体表面带有大量的氨基(-NH2),粒径分布较为均一(100nm左右),形貌较为规则,并具有良好的超顺磁性,因而该载体具有更加良好的性能.     

n型T'-214相超导体的结构和性质

T＇－214相化合物R2-xCexCuO4（R为稀土离子）成为超导体决定于R3+的离子半径大小、Ce4+的取代量和化合物的热处理时的稳定性．从Raman光谱实验结果提出热处理过程中发生电荷转移．Ce4+的取代引起TN（Cu）下降，当TN（Cu）降到0时，超导性出现。不同的稀土离子TN（Cu）不同，稀土离子的反铁磁性（AFM）与超导性（SC）共存。热电势的测量结果可以用双通道模型解释，n型超导体中电子与空穴共存．     

Ternary rare-earth alumo-silicides—single-crystal growth from Al flux, structural and physical properties

A number of rare-earth alumo-silicides (R-Al-Si) have been synthesized from the corresponding elements by high-temperature reactions, carried out in excess of aluminum to serve as a flux. Under these experimental conditions, large single crystals of all R-Al-Si ternary phases were readily produced. The crystal structures these ternaries adopt were studied by means of powder and single-crystal X-ray diffraction and were classified as follows: (1) the early rare-earths (R=La, Ce, Pr, Nd, Sm, Gd) yield RAl_xSi_2−x, x∼1, non-stoichiometric ternary derivatives of the body-centered α-ThSi₂-type; (2) the late rare-earths (R=Tb, Dy, Ho, Er, Tm) form stoichiometric R₂Al₃Si₂ compounds that crystallize in the C-centered monoclinic Y₂Al₃Si₂-type; (3) the divalent Eu and Yb produce EuAl₂Si₂ and YbAl₂Si₂ with the trigonal CaAl₂Si₂-type, whereas the last lanthanide element, Lu, forms LuAlSi with C-centered orthorhombic YAlGe-type. These structural trends are reviewed, and the evolution of the basic physical properties such as magnetism, heat capacity and electrical resistivity when moving across the series is described in detail.     

Synthesis and structural, spectroscopic and magnetic studies of two new polymorphs of Mn(SeO3)·H2O

Two new manganese(II) selenite polymorphs with formula Mn(SeO₃)·H₂O have been synthesized by slow evaporation from an aqueous solution. The crystal structure of both compounds (1) and (2) have been solved from X-ray diffraction data. The structure of (1) was determined from single-crystal X-ray diffraction techniques. The compound crystallizes in the Ama2 space group, with a=5.817(1), b=13.449(3), and Z=4. The structure of (2) has been solved from X-ray powder diffraction data. This phase crystallizes in the P2₁/n space group with unit-cell parameters of a=4.921(3), b=13.121(7), , β=90.03(2)° and Z=4. Both polymorphs exhibit a layered structure formed by isolated sheets of MnO₆ octahedra and (SeO₃)²⁻ trigonal pyramids in the (010) plane. These layers, which contain one manganese and selenium atom crystallographically independent, are formed by octahedra linked between them through the selenite oxoanions. The difference of both compounds consists in the stacking of the layers along the b-axis. The IR spectra show the characteristic bands of the selenite anion. Studies of luminescence performed at 6 K and diffuse reflectance spectroscopy have been carried out for both phases. The Dq and Racah (B and C) parameters, from luminescence and diffuse reflectance spectroscopy, are Dq=705, B=750, for (1) and Dq=720, B=745, for (2). The ESR spectra of both compounds are isotropic with g-values of 1.99(1). Magnetic measurements indicate the presence of antiferromagnetic couplings in both phases. The J-exchange parameters have been estimated by fitting the experimental magnetic data to a model for square-planar lattice. The values obtained are J/k=-0.83, −0.91 K and J^′/k=-0.97, −1.20 K, for polymorphs (1) and (2), respectively.     

Magnetic interactions in a series of paramagnetic Ln(III) complexes with a chelated imino nitroxide radical

The magnetic interactions in a new series of isostructural imino nitroxide radical lanthanide(III) complexes, [Ln(hfac)₃(IM2py)] (Ln = Gd–Yb: IM2py = 2-(2′-pyridyl)-4,5-dihydro-4,4,5,5-tetramethyl-1H-imidazoline-1-oxy; hfac = 1,1,1,5,5,5-hexafluoro-2,4-pentanedione), are examined by considering the intrinsic paramagnetic contribution of the Ln(III) ion from the corresponding [Ln(hfac)₃(pybzim)] with a diamagnetic pybzim(2-(2-pyridyl)benzimidazole) ligand; the Ln(III)–IM2py interaction being antiferromagnetic for the 4f⁷ to 4f¹³ Ln(III) complexes and negligibly small for the other complexes. This series is the first example reverse to the previous cases for the series of Ln–Cu or Ln–aminoxyl(NIT) radical (4,5-dihydro-4,4,5,5-tetramethyl-1H-imidazoline-3-oxide-1-oxy) complexes, other than only a few examples of semiquinone Ln complexes. This reverse nature of the magnetic interaction, as compared with the NIT complexes, validates the empirical approach by O. Kahn et al. [Inorg. Chem. 38 (1999) 3692; J. Am. Chem. Soc. 122 (2000) 3413] in the spin-coupled systems for a series of Ln(III) complexes.     

Dielectric,magnetic and mechanical properties of ferrite composites

The dielectric and magnetic properties of carbonyl—iron (CI) and nickel zinc ferrite polymer composites were studied with respect to the ferrite particulate content and microwave frequency. From the experimental data and using empirical models that relate the composite dielectric and magnetic properties, the respective dielectric and magnetic properties of the neat fillers were estimated. The tensile properties of the particulate composites comprising CI were shown to follow qualitatively Mooney's equation for the elastic modulus. The tensile strength of an elastomeric polyurethane and PVC composites containing CI increased with particulate content, while the elongation to break decreased with filler content. SEM micrographs of tensile fracture surfaces indicated that somewhat better adhesion is obtained in the case of the polyurethane-based composites compared to the PVC ones.     

Nanowire‐Based Electrochemical Biosensors

We review recent advances in biosensors based on one‐dimensional (1‐D) nanostructure field‐effect transistors (FET). Specifically, we address the fabrication, functionalization, assembly/alignment and sensing applications of FET based on carbon nanotubes, silicon nanowires and conducting polymer nanowires. The advantages and disadvantages of various fabrication, functionalization, and assembling procedures of these nanosensors are reviewed and discussed. We evaluate how they have been used for detection of various biological molecules and how such devices have enabled the achievement of high sensitivity and selectivity with low detection limits. Finally, we conclude by highlighting some of the challenges researchers face in the 1‐D nanostructures research arena and also predict the direction toward which future research in this area might be directed.     

C_(74)的结构、电子光谱及三阶线性光学性质的理论研究

用密度泛函（DFT）方法（BLYP/3－21G~*）研究了C_(74)的稳定几何构型。用 ZINDO及ab initio GIS两种方法对C_(74)的电子光谱进行了计算，预测C_(74)在红 外区域有光谱吸收。计算了C_(74)的三阶非线性光学系数<γ>为1.483 * 10~(-32) esu，它比C_(60)的<γ>（8.84 * 10~(-34) esu）要大得多。预测C_(74)亦将是 一种有很好应用前景的磁性材料。     

Bioelectrochemical Magnetic Immunosensing of Trichloropyridinol: A Potential Insecticide Biomarker

A fast, simple and sensitive bioelectrochemical magnetic immunosensing method is developed to monitor a potential insecticide biomarker, trichloropyridinol (TCP), in environmental sample. A magnet/glassy carbon (MGC) working electrode was used to accumulate immunocomplex associated magnetic beads and separate free and unbound reagents after liquid phase competitive immunoreaction among TCP antibody coated magnetic beads, TCP analyte and horseradish peroxidase (HRP) labeled TCP. The activity of HRP tracers was monitored by square‐wave voltammetry (SWV) by scanning electrocactive enzymatic product in the presence of 3,3′,5,5′‐tetramethylbenzidine dihydrochloride and hydrogen peroxide (TMB‐H₂O₂) substrate solution. The electrochemical signal of enzymatic product was greatly enhanced by dual accumulation events: magnetic accumulation of enzyme tracers bound magnetic beads and constant potential accumulation of enzymatic product. The voltammetric characteristics of substrate and enzymatic product were investigated, and the parameters of SWV analysis and immunoassay were optimized. Under the optimal conditions the immunosensor was used to measure as low as 5 ng L^?1 (ppt) TCP, which is 50‐fold lower than the value indicated by the manufacture of the TCP RaPID Assay kit (0.25 μg/L, colorimetric detection). The performance of the developed immunosensing system was successfully evaluated with river water samples spiked with TCP, indicating this convenient and sensitive technique offers great promise for decentralized environmental application. This technique could be readily used for detection of other environmental contaminants by developing specific antibodies against the contaminants and are expected to open new opportunities for environmental monitoring and public health.     

Thermal conductivity measurements on ferrofluids

The thermal conductivity of a number of ferrofluids consisting of colloidally dispersed Fe₃O₄ particles in diester, hydrocarbon, water and fluorcarbon carriers have been measured at 38°C. The variation in thermal conductivity with particle concentration is well described by Tareef's equation (1940). This has enabled the ratio of the physical to magnetic size to be determined and compared with estimates of the ratio obtained from electron micrographs and magnetic measurements.The fit between theory and experiment is particularly good for hydrocarbon carrier fluids giving the ratio of solid to magnetic radiusR _i/R _m=1.24±0.03 compared with the value obtained from magnetic data and electron micrographs of 1.19±0.07. The corresponding value from the fluids with a diester carrier ranges between 1.1<R _d/R _m<1.3 which is again consistent with microscopy and magnetic data.The application of a magnetic field of 0.1 T had no noticeable effect on the thermal conductivities of ferrofluids.