Thickness of a silica-tethered poly(ethylene oxide) layer measured by spin labeling

EPR spectroscopy of labeled poly(ethylene oxide) (PEO) grafted on silica has been used to characterize the conformation and local dynamics of the chains. Grafted molecules of MW 2000 with grafting ratios of 0.045, 0.057, 0.126, and 0.42 molecules/nm² were in contact with benzene. The mobility of the label was compared with that observed for solution of PEO from very diluted to highly concentrated and even bulk PEO. Thus, the concentration inside the grafted layer could be evaluated and also the thickness, which evolves rather linearly with the grafting ratio. © 1995 John Wiley & Sons, Inc.     

Effects of pH and citric acid contents on characteristics of ester-derived BaFe12O19 powder

The single domain size of BaFe₁₂O₁₉ powder with crystallite sizes less than 200 nm was produced using a citric acid precursor method. Fe³⁺ and Ba²⁺, in a molar ratio of 12, were chelated by COOH⁻ in an aqueous solution. After ethylene glycol additions, esterification, dehydration, and calcination led to the formation of ester-derived BaFe₁₂O₁₉ powder. High pH and/or high citric acid contents in the starting solution are required to complete chelate metallic ions in the solution and to form pure barium ferrite powder at 1073 K. Pure single magnetic domain BaFe₁₂O₁₉ particles of M(30 kOe)≈54 emu/g, M_r≈28 emu/g, and H_c≈3.7 kOe were produced using [citric acid]/[metallic ions]=1.5 and pH7.     

Direct measurement of the magnetocaloric effect in La0.67Ca0.33MnO3

Polycrystalline perovskite La_0.67Ca_0.33MnO₃ was synthesized by a sol–gel method. Its adiabatic temperature change ΔT_ad induced by a magnetic field change was measured directly. At 268 K, near its Curie temperature T_C, ΔT_ad of La_0.67Ca_0.33MnO₃ induced by a magnetic field change of 2.02 T reaches 2.4 K. The latent heat Q and magnetic entropy change −ΔS_M induced by a magnetic field change were calculated from the temperature dependence of ΔT_ad and zero-field heat capacity C_p. The maximum values of Q and −ΔS_M in La_0.67Ca_0.33MnO₃ induced by a magnetic field change of 2.02 T are 1.85 J g⁻¹ and 6.9 J kg⁻¹ K⁻¹, respectively. The former is larger than the phase transition latent heat of heating or cooling, which is about 1.70 J g⁻¹.     

Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

Influence of chemistry and hot rolling conditions on high permeability non-grain oriented silicon steel

This paper discusses the influence of chemical composition on the final electromagnetic properties in higher permeability material. Furthermore, the effect of the hot rolling practice and the end of austenite transformation temperature range on the hot band microstructure is described. The magnetic polarization J₅₀₀₀ better than 1.7 T, using hot rolling conditions 40 mm transfer bar thickness, finish mill entry temperature 1000 °C, and finishing temperature 800–840 °C and after decarburization heat treatment and grain growth treatment, was obtained.     

Topological order in the phase diagram for high-temperature superconductors with point defects

Applying a Lindemann like criterion obtained previously by Kierfeld et al. [J. Kierfeld, T. Nattermann, T. Hwa, Phys. Rev. B 55 (1997) 626], we estimate the magnetic field and temperature for a high-T_c superconductor, at which a topologically ordered vortex glass phase becomes unstable with respect to a disorder-induced formation of dislocations. The employed criterion is shown to be equivalent to a conventional phenomenological Lindemann criterion including the values for the numerical factors, i.e., for the Lindemann number. The positional correlation length of the topologically ordered vortex glass is calculated.     

Strukturelle Charakterisierung der Dicyanamid-Komplexe von Kupfer(II), Nickel(II) bzw. Kobalt(II) mit Aminopyridinen

Summary New dicyanamide complexes of the typeM[N(CN)₂]₂ L ₂ (M=Cu or Ni;L=2-, 3-, 4-aminopyridine, 2-amino-5-nitropyridine) and Co[N(CN)₂]₂ (2-amino-5-nitropyridine)₂ were prepared and studied by spectroscopic methods as well as by room-temperature magnetic moments. The results show that the Cu(II) complexes have elongated pseudooctahedral structures while the Ni(II) and Co(II) complexes are octahedral. In most cases the N(CN)₂ groups are in bridging function and through their cyanide nitrogens, or-more rarely-amide and cyanide nitrogens connect the basic structure units into polymeric conglomerates. In the Cu(II) systems exchange coupling is seen from the _eff value or ESR spectrum.

Professor Viktor Gutmann zum 70. Geburtstag gewidmet     

甲酰胺对有序介孔二氧化硅形貌的影响

At room temperature and in acidic solution, ordered mesoporous silicas with particular morphology were synthesized using cetylpyridinium chloride as the template and formamide as the cosolvent. Scanning electron microscope (SEM), small angle X-ray diffraction (SXRD), and nitrogen adsorption techniques were used to characterize the as-synthesized and calcined samples. Results showed that the samples had hexagonal mesostructure analogous to MCM-41 and relatively narrow pore-size distributions (BJH). Besides, BET surface areas of the samples were in the range of 1 000～1 250 m²·g^-1 and high total pore volumes were up to 1.367 cm³·g^-1. Addition of formamide affected obviously mesostructures and the morphology of the mesoporous silica. Furthermore, with the increase of the concentration of formamide, the unit-cell constant decreased and particle shape changed from gyroids to fibers.     

Synthesis and crystal structure of a new one-dimensional system with end-to-end single dicyanamide bridges between nickel(II) centres

The complex [Ni(tn)₂{N(CN)₂}]ClO₄ (tn=trimethylenediamine) has been synthesized and the structure has been determined. The complex forms a one-dimensional chain structure via the bidentate bridging ligand dicyanamide. A two-dimensional networks is formed via interchain hydrogen bond interactions.     

Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.