负载型双噁唑啉催化剂上的不对称Diels-Alder反应

 分别以乙烷桥键磺酸官能化的有机-无机杂化介孔材料、十二钨磷酸铯、活化硅胶以及SBA-15为载体,通过非共价键作用制备了负载型双噁唑啉催化剂,并将该催化剂用于催化3-((E)-2-丁烯酰基)-1,3-噁唑啉-2-酮和环戊二烯的不对称Diels-Alder反应. 研究表明,催化剂的性能取决于载体本身以及载体表面阴离子的性质. 以SBA-15为载体时产物的对映体选择性较低,可归因于载体表面较低的羟基浓度.     

In situ metal particle preparation in cross-linked poly(2-acrylamido-2-methyl-1-propansulfonic acid) hydrogel networks

Anionic hydrogels of poly(2-acrylamido-2-methyl-1-propansulfonic acid) (p(AMPS)) were prepared with a different amount of cross-linker extent and used for in situ preparation of magnetic and metal particles. The metal particles with various sizes were obtained inside the three-dimensional polymer matrixes by absorption of the corresponding metal ions from their aqueous solutions followed by the reduction in the presence of strong reducing agent. In addition to iron particles, cobalt, nickel, copper nanoparticles, and CdS, quantum dot has been prepared by utilizing hydrogel matrix as a template for inorganic/organic composite synthesis. It was observed that the amount of cross-linkers (0.5%, 0.75%, and 1% with respect to monomer mole ratio) used in this study for bare p(AMPS) has not significantly influenced the morphology of the hydrogels or the size of the iron particles while having great effect on swelling of p(AMPS) hydrogels in water. Copolymeric hydrogels of AMPS with acrylamide in different composition were also prepared. Thermogravimetric analysis and transmission electron microscopy results showed that the AMPS content of the copolymeric hydrogel has great impact on both the metal ion loading capacity and the size of the resultant metal particles.     

Effect of the Measurement Temperature on the Dispersive Component of the Surface Free Energy of a Heat Treated SiO2 Xerogel

The surface free energy of a monolithic silica xerogel treated at 1000°C has been measured by inverse gas chromatography in the temperature range 25–150°C using n-alkanes. Values of the dispersive component, _S ^D, vary from 49.07 mJ·m^–2 at 25°C to 17.20 mJ·m^–2 at 150°C. The _S ^D value obtained at 25°C is lower than that found for amorphous and crystalline silicas but higher than that found for glass fibres meaning that the heat treatment at 1000°C changes drastically the structure of the silica xerogel showing a surface similar to a glass. However, the higher value of _S ^D in comparison to glass fibres can be attributed to the mesoporous structure present in the silica xerogel. In the temperature range of 60–90°C there exists an abrupt change of the _S ^D values as well as in the dispersive component of the surface enthalpy, h _S ^D. Such abrupt change can be attributed to an entropic contribution of the surface free energy.     

Structural and magnetic properties of the solid solution () YMn1−x(Cu3/4Mo1/4)xO3

Recently, the ferroelectromagnet YMnO₃ has been the focus of interest because it exhibits both antiferromagnetism (Néel temperature 80 K) and ferroelectricity (Curie temperature 914 K). There have been no reports of complete YMn_1−xM_xO₃ solid solutions in which substitution of the foreign M cation preserves the hexagonal P6₃cm structure. In contrast there exist several homeotypic phases with the general formula, Ln_1+nCu_nMO_3+3n (n=1 (M=Ti), 2 (M=V) and 3 (M=Mo); Ln: lanthanide). Several YMn_1−x(Cu_3/4Mo_1/4)_xO₃ compounds have been synthesized. The solid solution, from YMnO₃ (x=0) to YCu_3/4Mo_1/4O₃ (x=1) has been characterized by X-ray diffraction and transmission electron microscopy study. For 0<x<0.9, the compounds are found to crystallize in the non-centrosymmetric structure, space group P6₃cm, of YMnO₃. The Mn-free end member, x=1, crystallizes in a complex multiple cell, the superstructure being associated to Cu³⁺/Mo⁶⁺ cationic ordering. Dilution of the Mn³⁺ magnetic array by the paramagnetic (Cu²⁺) and diamagnetic (Mo⁶⁺) cations is found to decrease the antiferromagnetic ordering temperature and it becomes undetectable for x0.5 compositions.     

Studies on tetra-amine phthalocyanines

Metal(II) tetranitro phthalocyanines of cobalt, nickel and copper are synthesized in pure state by a novel modified method. The complexes are characterized using elemental, electronic and IR spectral studies. Pure metal(II) tetra-amino phthalocyanines of cobalt, nickel and copper are synthesized by reducing the nitro groups of the above complexes using sodium sulphide. These complexes are also characterized by elemental, electronic, IR spectral and magnetic susceptibility measurements. The nature of the electrical conductivities of the above three metal(II) tetra-amino phthalocyanine derivatives are studied in the temperature range 303-473 K and the data are presented. Among the effect of various substituent groups on the electrical conducting property of phthalocyanine, amine group substituent on the peripheral benzene ring of the phthalocyanine molecule has been found to increase electrical conductivity to a greatest extent. These complexes showed about 10⁵-10⁶ times higher electrical conductivities compared to their parent phthalocyanine compounds.     

Investigation of nucleation processes under the influence of magnetic fields

The present work demonstrates the possibilities and the limits of the in situ electrochemical scanning tunneling microscopy for investigation of nucleation processes in magnetic fields on the examples of Cu and Co electrodeposition onto Au(111) electrodes from sulfate electrolytes with pH 3. Cyclic voltammograms of Cu in the underpotential range (UPD) exhibit no significant change in the cathodic and anodic peaks recorded in magnetic fields parallel to the surface. In magnetic fields of a permanent magnet, the reconstruction of Au has been annihilated during UPD of Cu. In the overpotential range, the dissolution of Cu is inhibited. This triggers the formation of a Cu–Au surface alloy. The UPD deposition of Co onto Au(111) could be proven without magnetic field, which leads to the formation of two monolayers. The nucleation in an applied field could not be observed due to higher induced fluctuations and microconvective effects. Contribution to special issue “Magnetic field effects in Electrochemistry”.     

Synthesis and crystal structure of the palladium oxides NaPd3O4, Na2PdO3 and K3Pd2O4

NaPd₃O₄, Na₂PdO₃ and K₃Pd₂O₄ have been prepared by solid-state reaction of Na₂O₂ or KO₂ and PdO in sealed silica tubes. Crystal structures of the synthesized phases were refined by the Rietveld method from X-ray powder diffraction data. NaPd₃O₄ (space group Pm3¯n, a=5.64979(6) Å, Z=2) is isostructural to NaPt₃O₄. It consists of NaO₈ cubes and PdO₄ squares, corner linked into a three-dimensional framework where the planes of neighboring PdO₄ squares are perpendicular to each other. Na₂PdO₃ (space group C2/c, a=5.3857(1) Å, b=9.3297(1) Å, c=10.8136(2) Å, β=99.437(2)°, Z=8) belongs to the Li₂RuO₃-structure type, being the layered variant of the NaCl structure, where the layers of octahedral interstices filled with Na⁺ and Pd⁴⁺ cations alternate with Na₃ layers along the c-axis. Na₂PdO₃ exhibits a stacking disorder, detected by electron diffraction and Rietveld refinement. K₃Pd₂O₄, prepared for the first time, crystallizes in the orthorhombic space group Cmcm (a=6.1751(6) Å, b=9.1772(12) Å, c=11.3402(12) Å, Z=4). Its structure is composed of planar PdO₄ units connected via common edges to form parallel staggered PdO₂ strips, where potassium atoms are located between them. Magnetic susceptibility measurements of K₃Pd₂O₄ reveal a Curie-Weiss behavior in the temperature range above 80 K.     

亲水作用色谱法测定表阿霉素及其杂质

建立了一种以亲水作用色谱分离测定表阿霉素的新方法。采用硅胶色谱柱及高极性有机溶剂水相缓冲溶液流动相。对流动相的pH、缓冲溶液的浓度及流速进行了优化,确定了以乙腈甲酸钠缓冲溶液(pH2.9)(90∶10,V/V)作为流动相的最佳条件。对优化的分离条件进行系统适应性实验,结果表明表阿霉素与有关杂质之间的分离度和拖尾因子均达到药典要求。该法具有良好的线性(相关系数0.9971～0.9991)和重复性(峰面积RSD<1.0%),方法简便实用,用于实际样品分析,结果满意。     

Untersuchungen an Hydriden im Bereich der Phase Ti2CO1—x Fe x (x=0–0,5)

The hydrogen absorption of the phase Ti₆₄Co_32–x Fe _x (x=0...16) and its influence on the magnetic properties have been investigated. Measurements of the vapour-pressure, wide-line NMR and magnetic susceptibility have been performed. Substitution of Co by Fe does not change the amount of absorbed hydrogen. However the reaction rate of hydriding process, the activation energy of diffusion and the magnetic quantities change upon this substitution.