Carbenium ion pairs on silica: UV-spectroscopic and electrokinetic measurements of triarylmethylium/halide-aerosil in 1,2-dichloroethane

The interaction of carbenium ion pairs with silica is studied by means of UV-spectroscopy, electrokinetic and adsorption measurements using triphenylmethyl derivatives, (RC₆H₄)₃CX, (X=F, Cl, Br, SCN, OH; R=Cl, I, H, CH₃, C(CH₃)₃, OCH₃, N(CH₃)₂) in interaction with silica particles suspended in 1,2-dichloroethane. The adsorption of triarylmethyl-halides onto silica is accompanied by the heterolytic dissociation of the tertiary carbonhalogen bond. The degree of ionization depends on the basicity of the counter anion and acidity of the cation, respectively. The influences of both concentration and structure of triarylmethyl halides on the zeta-potential are discussed with regard to steric and electronic factor. The zeta-potential values of the adsorbates decrease significantly, as compared with the free silica surface, from a certain triarylmethyl halide concentration where ionization takes place, to a constant level which is characteristic of the carbenium ion pair. These constant zeta-potential values of the adsorbates depend on the basicity of the counter ion and the _p Hammett constants of the ring substitutents, with exclusion of sterically hindered substituents and salt derivatives, e.g., crystal violet and malachite green.     

Synthesis and characterization of nanoparticulate MnS within the pores of mesoporous silica

Mesoporous silica was loaded with nanoparticulate MnS via a simple post-synthesis treatment. The mesoporous material that still contained surfactant was passivated to prevent MnS formation at the surface. The surfactant was extracted and a novel manganese ethylxanthate was used to impregnate the pore network. This precursor thermally decomposes to yield MnS particles that are smaller or equal to the pore size. The particles exhibit all three common polymorphs. The passivation treatment is most effective at lower loadings because at the highest loadings (SiO₂:MnS molar ratio of 6:1) large particles (>50 nm) form at the exterior of the mesoporous particles. The integrity of the mesoporous network is maintained through the preparation and high order is maintained. The MnS particles exhibit unexpected ferromagnetism at low temperatures. Strong luminescence of these samples is observed and this suggests that they may have a range of important application areas.     

Structure and Magnetic Properties of Nickel–Zinc Ferrite Nanoparticles Prepared by Glass Crystallization Method

Summary. The magnetic and microstructure properties of Fe₂O₃–0.4NiO–0.6ZnO–B₂O₃ glass system, which was subjected to heat treatment in order to induce a magnetic crystalline phase (Ni_0.4Zn_0.6-Fe₂O₄ crystals) within the glass matrix, were investigated. DSC measurement was performed to reveal the crystallization temperature of the prepared glass sample. The obtained samples, produced by heat treatment at 765°C for various times (1, 1.5, 2, and 3 h), were characterized by X-ray diffraction, IR spectra, transmission electron microscopy, and vibrating sample magnetometer. The results indicated the formation of spinel Ni–Zn ferrite in the glass matrix. Particles of the ferrite with sizes ranging from 28 to 120 nm depending on the sintering time were observed. The coercivity values for different heat-treatment samples were found to be in the range from 15.2 to 100 Oe. The combination of zinc content and sintering times leads to samples with saturation magnetization ranging from 12.25 to 17.82 emu/g.     

Two new tetranuclear complexes of the macrocyclic oxamide [MCu3] (M = Cd, Mn, macrocyclic oxamide = 1,4,8,11-tetraazacyclotradecanne-2,3-dione): syntheses, spectra and magnetic properties

Two new tetranuclear complexes of macrocyclic oxamide [Cd(CuL)₃](NO₃)₂·2.5H₂O 1, [Mn(CuL)₃(OH)₂](ClO₄)₂·Mn(H₂O)₆·4.5H₂O 2 (L = 1,4,8,11-tatraazacyclotradecanne-2,3-dione) have been synthesized, structurally characterized and preliminary investigated by magnetic studies. The structures of the title complexes consist of a tetranuclear units MCu₃ (M = Cd, Mn), the packing diagram shows two-dimensional and three-dimensional system through intermolecular weak interactions. The temperature-dependent magnetic susceptibilities of complex 2 were analyzed by an approximate treatment leading to J = −33 cm⁻¹, g_Cu = 2.10, g_Mn = 1.95 indicating antiferromagnetic exchange between Cu(II) and Mn(II) ions.     

High-performance liquid chromatography of sulfonamides and quinolones on p-tert-butyl-calix[6]arene-bonded silica gel stationary phase

The high-performance liquid chromatographic behavior of some sulfonamides and quinolones was studied on a p-tert-butyl-calix[6]arene-bonded silica gel stationary phase. The effect of mobile phase variables such as methanol content, ionic strength and pH on their chromatographic behavior was investigated. The retention behavior of sulfonamides on the stationary phase was compared with that on both Zorbax C₁₈-bonded silica gel and γ-(ethylenediamino)propyltriethoxylsilane-bonded silica gel (diamino-bonded phase). The retention mechanism of sulfonamides and quinolones on the stationary phase was also discussed. The results indicate that the stationary phase behaves as a reversed-phase packing and its separation selectivity is much better than that of not only Zorbax C₁₈ phase but also diamino-bonded phase. Some sulfonamides and quinolones were separated on the stationary phase, but the separation of sulfonamides is far more successful.     

CeAgAs2 — a New Derivative of the HfCuSi2 Type of Structure: Synthesis,Crystal Structure and Magnetic Properties

Single crystals of CeAgAs₂ have been obtained by chemical transport reactions starting from a pre‐reacted powder sample. The crystal structure was solved using X‐ray diffraction (space group Pmca, No. 57, a = 5.7586(4) Å, b = 5.7852(4) Å, c = 21.066(3) Å, Z = 8) and refined to a residual of R(F) = 0.029 for 46 refined parameters and 1020 reflections. The structure of CeAgAs₂ represents a new distorted and ordered variant of the HfCuSi₂ type. The characteristic feature of this structure are infinite cis‐trans chains of As atoms with As—As distances of 2.563(1) Å and 2.601(1) Å. CeAgAs₂ is paramagnetic (μ_eff = 2.37 μ_B, θ = —10.5(2) K), with antiferromagnetic ordering at 5.5(2) K and exhibits a metamagnetic transition starting at 4.6 kOe and T = 1.8 K.     

One-phase supported titanium-based catalysts for polymerization of ethylene. III. ESR spectra of the ternary system Sio2—R3Al—TiCl4

The ternary catalyst systems based on activated silica, aluminum alkyl, and titanium tetrachloride were polymerized in an ethylene gas-phase polymerization process, and further studied using ESR spectroscopy. Two types of titanium (III) ESR-active centers were observed and a linear dependence between the concentration of that characterized by a rhombic anisotropic signal with g₁ = 1.962, g₂ = 1.945, and g₃ = 1.913 values and catalyst productivity was found. © 1993 John Wiley & Sons, Inc.     

Fused silica capillary tube isotachophoresis using a multichannel photodiode array detector

Isotachophoresis carried out in a 0.25 mm i.d. fused-silica capillary tube yielded high resolution, compared with that in a fluorinated ethylene-propylene polymer tube. The use of an ultraviolet-visible multichannel spectrophotometer with photodiode array as detector together with a cross flow cell (volume 0.01 μl) was investigated. The system was successfully applied to the analysis of cationic dyes such as neutral red, bismarck brown, and basic fuchsine.     

SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS*

Mesoporous poly (styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis wasachieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymerin the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template orpore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m~2/g) andpore volumes (e.g. 0.6 cm~3/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, porevolumes and pore diameters of the hybrid materials increase.     

Preparation and properties of rare-earth containing oxide fluoride glasses

The preparation of the rare earth containing oxide fluoride glasses LnF₃ (Ln; Y through Lu)-BaF₂-AlF₃-GeO₂ in which the nominal content of LnF₃ reached 60 mol% in maximum and their basic properties such as density, refractive index and glass transition temperature were investigated and summarized in detail. Especially, in order to discuss the local structure around the rare earth ion in the glass, the Judd-Ofelt analysis (discussion with Ω parameters) of the HoF₃-BaF₂-AlF₃-GeO₂ glasses was carried out. The unique fluorescent behavior and the magnetic properties of LnF₃-BaF₂-AlF₃-GeO₂ glasses (Ln = Tb and/or Sm) were also studied.