Crystal structure, oxidation state and magnetism of La1.2Sr2.4RuO7: a new member of the [A2O][AnBn−1O3n] series of hexagonal perovskites

Single crystals of the new compound La_1.2Sr_2.4RuO₇, an oxide related to the hexagonal perovskites, were grown from a BaCl₂ flux. The structure was solved by single crystal X-ray diffraction. La_1.2Sr_2.4RuO₇ crystallizes in the space group with a=5.760(1) Å and c=18.273(3) Å. It is one of the rare examples of oxides with isolated RuO₆-octahedra. The structure consists of alternating layers of RuO₆-octahedra and trigonal (La,Sr)O₆-prisms. These prisms are capped by one additional oxygen ion, which occupies a distorted position within the (La,Sr)O₆-layers. La_1.2Sr_2.4RuO₇ is the second member of the general [A₂O][A_nB_n−1O_3n] family of hexagonal perovskites with n=2 and the first ruthenate possessing this structure. XANES investigations, bond valence sum calculations and magnetic measurements show that ruthenium takes the oxidation state +5. Although the ruthenium ions have quite long distances, a medium strong antiferromagnetic interaction between these paramagnetic centers was observed.     

中药血清药理学研究金银花的抑菌活性

采用最低抑菌浓度(MIC)测定方法和抑菌活性试验,考察不同产地的金银花以及含药血清的抑菌效果。试验结果为:含药血清对大肠杆菌和金黄色葡萄球菌的MIC分别为0.5μg绿原酸/mL和0.25μg绿原酸/mL;含药血清抑菌活性为高敏。     

Synthesis and characterization of monodisperse magnetic composite particles for magnetorheological fluid materials

Monodisperse magnetic composite particles (MCP) were prepared and characterized for a study of magnetic field-responsive fluids. Magnetic composite particles used are iron oxide-coated polymer composite particles, which were synthesized through in situ coating of iron oxide onto pre-existing polymer particles by the reduction of ferrous fluids. For a uniform and bulk coating of iron oxide, the porous structure was introduced into the substrate polymer particles through a two-step seeded polymerization method. Moreover, surface cyano-functionality was born from acrylonitrile unit of substrate polymer and it played an important role in obtaining successful uniform coating. The structure of the composite particle was analyzed by using a thermo gravimetric analysis (TGA) and a X-ray diffraction (XRD) analysis. The magnetization property of the particle was also observed. Then, the rheological properties of monodisperse magnetorheological (MR) suspensions of magnetic composite particles were examined under a magnetic field using a parallel-plate type commercial rheometer. From the rheological measurements, it was found that MR properties of the magnetic composite suspensions are dependent on the iron oxide content and the fluid composition.     

Characterization of quasi-one-dimensional S=1/2 Heisenberg antiferromagnets Sr2Cu(PO4)2 and Ba2Cu(PO4)2 with magnetic susceptibility, specific heat, and thermal analysis

Properties of Sr₂Cu(PO₄)₂ and Ba₂Cu(PO₄)₂ having [Cu(PO₄)₂]_∞ linear chains in their structures with Cu-O-P-O-Cu linkages were studied by magnetic susceptibility (T=2-400 K, H=100 Oe) and specific heat measurements (T=0.45-21 K). Magnetic susceptibility versus temperature curves, χ(T), showed broad maxima at T_M=92 K for Sr₂Cu(PO₄)₂ and T_M=82 K for Ba₂Cu(PO₄)₂ characteristic of quasi-one-dimensional systems. The χ(T) data were excellently fitted by the spin susceptibility curve for the uniform S=1/2 chain (plus temperature-independent and Curie-Weiss terms) with g=2.153(4) and J/k_B=143.6(2) K for Sr₂Cu(PO₄)₂ and g=2.073(4) and J/k_B=132.16(9) K for Ba₂Cu(PO₄)₂ (Hamiltonian H=JΣS_iS_i+1). The similar J/k_B values were obtained from the specific heat data. No anomaly was observed on the specific heat from 0.45 to 21 K for both compounds indicating that the temperatures of long-range magnetic ordering, T_N, were below 0.45 K. Sr₂Cu(PO₄)₂ and Ba₂Cu(PO₄)₂ are an excellent physical realization of the S=1/2 linear chain Heisenberg antiferromagnet with k_BT_N/J<0.34% together with Sr₂CuO₃ (k_BT_N/J≈0.25%) and γ-LiV₂O₅ (k_BT_N/J<0.16%). Sr₂Cu(PO₄)₂ and Ba₂Cu(PO₄)₂ were stable in air up to 1280 and 1150 K, respectively.     

化合物库的组合技巧和组合合成

从化合物库的组合技巧和组合合成方法两个方面探讨了组合化学及其在药物开发中的应用。     

The identification of tricyclic neuroleptics and sulphonamides by high-performance thin-layer chromatography

Circular high-performance thin-layer chromatography (HPTLC) has been used to differentiate a series of twelve tricyclic neuroleptics, using both normal phase and reverse phase procedures. The use of normal phase systems also allows the resolution of geometric isomers of chlorprothixene, clopenthixol and flupenthixol. Thirteen sulphonamides and Trirnethoprim may also be distinguished using HPTLC.     

纤维素基磁性聚偕胺肟树脂的研究——锌副族金属离子在树脂上的吸附

研究了Ｚｎ２＋、Ｃｄ２＋、和Ｈｇ２＋离子在碱式纤维素基磁性聚偕胺肟树脂（ＢＭＡＯ）上的吸附动力学。结果表明，吸附速度受粒内扩散所控制。测得粒内扩散系数分别是１．２２×１０－４、２．４２×１０－４和３．９０×１０－４ｃｍ２·ｓ－１；Ｈｇ２＋离子在树脂上的吸附行为符合Ｆｒｅｕｎｄｌｉｃｈ和Ｌａｎｇｍｕｉｒ等温吸附方程；浓集因数随Ｈｇ２＋离子浓度降低而上升，有利于从稀溶液中除去Ｈｇ２＋离子。将树脂加至Ｚｎ２＋、Ｃｄ２＋或Ｈｇ２＋离子浓度为５０ｐｐｍ的溶液中，离子去除率分别是９６．１、９９．９和９９．３％。     

苯乙烯-异戊二烯嵌段共聚物分子运动的脉冲核磁共振研究

用西德Bruke,MSL-300核磁共振谱仪研究了三个不同系列的苯乙烯-异戊二烯嵌段共聚物的固体回波谱。用PASCAL语言在谱仪提供的计算机上、用线性最小二乘法回归分析把实验曲线分解成快速和慢速两个组分,它们分别对应于嵌段共聚物中刚性相和流动相,从而给出样品两相结构的定性定量信息。     

Preparation and characterisation of thermoresponsive poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethyl acrylate)] microspheres as a matrix for the pulsed release of drugs

Despite the large number of publications and patents concerning pH/thermoresponsive polymers, few data are available concerning the preparation of thermoresponsive cross-linked microspheres from preformed polymers. Therefore, N-isopropylacrylamide-co-acrylamide-co-(2-hydroxyethyl acrylate) copolymers were obtained as a new thermoresponsive material with a lower critical solution temperature (LCST) around 36 degrees C, in phosphate buffer at pH 7.4, and with a cross-linkable OH group in their structure. The LCST value was determined both by UV spectroscopy and microcalorimetric analysis. These copolymers were solubilised in acidified aqueous solution below their LCST, dispersed in mineral oil, and transformed into stable microspheres by cross-linking with glutaraldehyde. The thermoresponsive microspheres were characterised by optical and scanning electron microscopy, degree of swelling, and water retention. The pore dimensions of the microspheres and the retention volumes of some drugs and typical compounds were evaluated at different temperatures by liquid chromatography. Indomethacin, as a model drug, was included in the microspheres by the solvent evaporation method. Finally, the influence of temperature and of temperature cycling on drug release was investigated.     

Open-access liquid chromatography/mass spectrometry in a drug discovery environment

The use of open-access mass spectrometry to monitor synthetic chemistry reactions, and also the integrity and purity of new chemical entities, has been a part of the medicinal chemist's tool-box for more than 5 years. Originally in our group at Wyeth Research there were two open-access methods available to the chemists, flow injection analysis (FIA) and liquid chromatography/mass spectrometry (LC/MS). The FIA method was approximately 3 min long, while the LC/MS method was approximately 20 min long (including an 8 min gradient). Within the first 2 years, the total number of open-access analyses increased by approximately 125%. It is interesting, however, that the number of LC/MS analyses increased by more than 285%. This is attributed to the fact that the chemists began using the LC/MS data to monitor reactions and also to check final product integrity and purity. In addition, the number of chemists performing parallel synthesis reactions has increased; thus, individual chemists can produce sample sets of up to 100 vials. This paper describes the implementation of new methodology, which accommodates the need for much faster run times and also the ability to acquire alternating positive and negative ion spectra within the same run. In addition, the instrument has been configured to e-mail the resulting processed data report to the submitting chemist. Several methods have been developed, including structure elucidation using in-source collision-induced dissociation (CID) and night-time analysis. The LC/MS methods for this system are described herein and are applicable to both industrial and academic synthetic chemistry optimization efforts.