Magnetic exchange interactions in tetrabromocuprate compounds

Magnetic and structural data for 28 compounds containing the tetrabromocuprate ion are presented. The parameters which affect the strength and sign of the magnetic superexchange interaction via non-bonding contacts between bromide ions are described and a system for describing the topology of the interaction between tetrahedra is proposed. Analysis of the data suggests that the primary factors affecting the magnetic exchange are the Br?Br distance, the Cu-Br?Br angle and the Cu-Br?Br-Cu dihedral angle.     

Evaluation of a magnetically coupled microcavity hollow cathode discharge for atomic emission spectroscopy

A magnetically coupled microcavity hollow cathode discharge device was evaluated for its analytical potential as a boosted atomic emission source. A magnetic field using an electromagnet was applied perpendicular to the axis of the microcavity hollow cathode. The intensity of the atomic emission of copper, aluminum and the ionic emission of magnesium increased with increasing magnetic field until it reached a maximum. A further increase in the field strength did not lead to an enhancement of these emissions. The attainment of the maxima was attributed to the increase in the electron temperature and radial diffusion of the electrons from the center of the microcavity axis. Electron temperatures in the presence of the magnetic field calculated based on the semicorona model were shown to be proportional to the square of the reduced field strength. Further, these maxima were correlated to the energies of the upper levels of the transition studied.     

Evaluation of the limit of performance of an analytical method based on a statistical calculation of its critical concentrations according to ISO standard 11843: Application to routine control of banned veterinary drug residues in food according to European Decision 657/2002/EC

Traceability of the measurement of analytical parameters capable of evaluating the performance of methods is an important concept for the assessment of quality for the routine control, especially for residue monitoring of non-authorized medicinal substances in food from animal origin. The European Decision no. 657/2002/EC recommends to calculate two statistical limits, CCα and CCβ, which allow to evaluate the critical concentrations above which the method reliably distinguish and quantify a substance taking into account the variability of the method and the statistical risk to take a wrong decision. The calculation, which can be derived from the ISO standard no. 11843 is applied on a routine basis. An example displays a very simple way for evaluating the performance of an LC-MSMS method which has been validated a few years ago and is qualified onto a Micromass Quattro LCZ tandem mass spectrometer to monitor and confirm the nitrofuran metabolite residues in food from animal origin. Community Reference Laboratory for Antimicrobial Veterinary Drug Residue Control in Food from Animal Origin     

Hexagonal Ferrites from Melts and Aqueous Solutions,Magnetic Recording Materials

Owing to their particular crystallographic properties, ferrimagnetic hexagonal ferrites exhibit a far greater coercive force than the conventional magnetic pigments. They therefore appear to be suitable for use in magnetic information storage procedures, some of which are novel and are at the development stage. Thus, magnetic tapes of high coercive force containing barium ferrite could be used as master tapes for copying magnetic information or for producing forgery-proof magnetic cards, if magnetic heads having high-order write fields were successfully developed. Moreover, platelet-like ferrite pigments in which the preferred direction of magnetic orientation is perpendicular to the plane of the platelet are of great interest for perpendicular magnetic recording. In this progress report, the crystal structures, magnetic characteristics of hexagonal ferrites, and chemical processes for their production are discussed. In particular, reactions in salt melts or under hydrothermal conditions produce finely divided pigments whose particles have a pronounced hexagonal, plate-like habit, a narrow particle size distribution, and advantageous magnetic properties. The magnetic properties of the pigments crystallized from salt melts may be adjusted by cation exchange.     

聚L－谷氨酸－炔诺酮肟酯复合体的制备

合成了聚Ｌ－谷氨酸－炔诺酮肟酯的复合体，炔诺酮的接入量为２２．８％．体外释放时间约１５大。     

Comparison of quantitative methods for analysis of polyphasic pharmaceuticals

Adequate very sensitive quantification methods are needed for the development and are also now required for the monitoring of undesirable solid form(s) as routine tests. The pre-requisite for quantitation are selectivity, sensitivity and most important the purity of standards and their proper storage, what is a challenge for metastable forms. Several analytical techniques are available such as X-ray diffraction, spectroscopy, thermal analysis and microcalorimetry. The different steps of the validation of the analytical methods and problems to be solved are discussed. Examples illustrate the different techniques and compare their possible advantages and limits. The relative standard deviation of measurements should allow for checking the homogenization procedure of mixtures for calibration. The validation should be carried out following ICH guidelines for validation of analytical methods. Comparison of different techniques in adequate concentration range add confidence in the analytical results.     

固定pH滴定法测定弱酸弱碱性药物

报道一种水溶液吕测定弱酸弱碱性药物的新型滴定分析方法－固定ｐＨ滴定法，其理论基础是弱酸弱碱在水溶液中各种存在形式的分布系数在ｐＨ值固定时为常数，对甲硝唑，盐酸美西律等离散常数在１０＾－８至１０＾－１１范围内的７种弱酸弱碱性药物进行测定。结果与药典法吻合，回收率在９９．４％～１００．６％，方法简便，快速，准确，制剂中的赋形剂及色物不影响测定。     

血小板阻聚药物中间体N-环己基-5-氯丁基-1H-四氮唑的合成

以δ-戊内酯和环己胺为原料合成了抗血小板聚集药物西洛他唑的重要中间体N-环己基-5-氯丁基-1H-四氮唑，选择了合适的相转移催化剂及安全的叠氮试剂并获得较高的收率。     

Comparison of micro- and mesoporous inorganic materials in the uptake and release of the drug model fluorescein and its analogues

The uptake of the three species of the drug model fluorescein (fluorescein sodium salt (FNa), fluorescein free acid (F), and fluorescein diacetate (FDA)) by zeolite NaX and the mesoporous zeotype MCM-41 was investigated as well as their release rates into solutions at pH 7 and pH 4.5. UV/Vis analysis was carried out at a wavelength of 490 nm. Uptakes of the sodium salt of 9 % for zeolite X and 14 % for MCM suggest little penetration of the pores. The use of ethanol as the loading solvent for F resulted in little uptake for both zeolitic materials due to the successful competition of the ethanol for binding sites. Use of acetone (weaker proton acceptor) as loading solvent significantly improved the uptake of F to 17 % and 12 % for zeolite X and MCM, respectively, whilst the uptake of FDA in acetone increased still further to 22 % and 17 % for zeolite X and MCM, respectively. Generally there was a large initial release of the fluorescein analogues from the surface of the zeolites with very little further increase over time. The prescence of an esterase enzyme in the release medium of FDA tripled the release from MCM to 15 % but left the release from zeolite X unaffected at 6 %. The results obtained show that uptake of fluorescein and its analogues is dependent on the loading solvent used, the amount released is influenced by not only the solvent but the pH and the presence of enzymes in the release medium.     

A new poly(2-hydroxy-3-phenoxypropylacrylate, 4-hydroxybutyl acrylate, diethyl maleate) membrane controlled clonidine linear release in the transdermal drug delivery system

Oral clonidine, used as an antihypertensive, can result in some side effects such as dry mouth, drowsiness, dizziness and sedation; thus, clonidine transdermal drug delivery (TDD) was considered. Use of the controlled release membrane was one of the methods in TDD systems to regulate the permeation properties. A new type of copolymer membrane that controlled clonidine linear release in TDD system was synthesized by UV radiation. This membrane consisted of three monomers: 2-hydroxy-3-phenoxypropylacrylate, 4-hydroxybutyl acrylate and diethyl maleate. The membrane had both fine permeation properties and perfect physical properties when three monomers were in the weight ratio of 4:4:2; this type of membrane was chosen as an optimized membrane. It was found that the membrane controlled clonidine zero-order release, the permeation rates decreased with the thicknesses of membranes increasing, and the permeation rates were linearly dependent on the square root of the concentration of clonidine. Furthermore, the optimized membranes were characterized by FTIR, DSC and SEM.