螯合树脂交换——光度法测定氯化钠溶液中微量镁

研究了用螯合树脂交换分离富集氯化钠溶液中微量镁及吸光光度法测定镁含量的方法。回收率为９６．０－１０１．０％，在ＰＨ１０的硼砂－氢氧化钠介质中，镁含量在０－１２μｇ／２５ｍｌ范围内符合比耳定律。方法稳定性高、重现性好。     

Polyalkoxybenzenes from plant sources 2. Synthesis of isoxazoline analogs of combretastatin from natural allyl(methylenedioxy)methoxybenzenes

A series of analogs of the natural mitostatic agent combretastatin were synthesized by the reaction of nitrile oxides with natural allylbenzenes, such as myristicin, apiol, and dillapiol. The 1,3-dipolar cycloaddition reactions in allylic systems proceed regiospecifically. The reactions with trans isomers of propenylbenzenes, viz., isomyristicin, isoapiol, and isodillapiol, as dipolarophiles produce regioisomers. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2375–2380, December, 2007.     

Alkenylation of thiophenes at the 2-position with magnesium alkylidene carbenoids

Treatment of magnesium alkylidene carbenoids, generated from 1-chlorovinyl p-tolyl sulfoxides with isopropylmagnesium chloride at −78 °C in toluene, with 2-lithiothiophenes gave 2-alkenylated thiophenes in good to high yields. The intermediate of this reaction was found to be an alkenylmagnesium, which could be trapped with iodoalkanes and ethyl chloroformate. This procedure offers a novel and efficient one-pot synthesis of thiophenes having a disubstituted or a trisubstituted olefin at the 2-position from thiophenes in good yields.     

Hole doping and superconductivity characteristics of the s=1, 2 and 3 members of the (Cu,Mo)-12s2 homologous series of layered copper oxides

Superconductivity characteristics have been systematically evaluated for a two-CuO₂-plane copper oxide system, (Cu,Mo)-12s2, upon increasing the number of fluorite-structured layers, s, between the two CuO₂ planes. Essentially single-phase samples of (Cu_0.75Mo_0.25)Sr₂YCu₂O_7+δ (s=1), (Cu_0.75Mo_0.25)Sr₂(Ce_0.45Y_0.55)₂Cu₂O_9+δ (s=2) and (Cu_0.75Mo_0.25)Sr₂(Ce_0.67Y_0.33)₃Cu₂O_11+δ (s=3) were synthesized through a conventional solid-state route in air. To make the samples superconductive an additional high-pressure oxygenation (HPO) treatment was required. Such treatment (carried out at 5 GPa and 500 °C in the presence of 75 mol% Ag₂O₂ as an oxygen source to maximize the T_c) compressed the crystal lattice for the three members of the (Cu_0.75Mo_0.25)-12s2 series equally, i.e., by 0.01 Å for the a parameter and by 0.07 Å for the c parameter per formula unit. From both Cu L-edge and O K-edge XANES spectra the s=1 sample was found to possess the highest overall hole-doping level among the HPO samples. Accordingly it exhibited the best superconductivity characteristics. With increasing s, both the T_c (s=1: 88 K, s=2: 61 K, s=3: 53 K) and H_irr values got depressed, being well explained by the trend of decreasing CuO₂-plane hole concentration with increasing s as revealed from O K-edge XANES spectra for the same samples. Hence, the present results do not suggest any significant (negative) impact on the superconductivity characteristics from the gradually thickened fluorite-structured block itself.     

Effect of enzyme concentration on the dynamic behavior of a membrane-bound enzyme system

The dynamic behavior of the reaction-diffusion system, composed of glucose oxidase (EC 1.1.3.4) immobilized at a uniform concentration in a membrane, used as a glucose electrode is represented by a diffusion equation with a nonlinear reaction-term in one-dimensional space. The mathematical model is analyzed by computer simulation, that is, numerical integration of the equation under various initial and boundary conditions, to examine the effect of enzyme concentration on the response characteristics (responsiveness and linearity in response) of the electrode. The analysis of the responses of the system to stepwise changes in the boundary value (glucose concentration in simple solution) infers that the enzyme concentration governs the patterns of the spatial distributions of the substrates (glucose and dissolved oxygen) in steady states and transient responses. It is also revealed that the response characteristics of the electrode are optimized with concentration of immobilized enzyme and that the system establishes the steady states at the same spatial distributions of the substrates, regardless of the boundary value. The diffusion of the substrates and the oxygen concentration also have significant effects on the response characteristics of the electrode.     

Ni(phen)(H2O)(V2O6)的水热合成和晶体结构（英）

A novel compound Ni(phen)(H₂O)(V₂O₆) has been hydrothermally synthesized and structurally determined to be a two-dimensional compound, which contains {V₂O₆}_n^2n- chains interconnected by nickel(Ⅱ) complexes via oxygen atoms. The crystallographic data measured by single-crystal X-ray diffraction analysis are as follows: C₁₂H₁₀N₂NiO₇V₂, M_r=454.81, monoclinic, space group P2₁/c, a=0.784 6(3), b=2.103 6(8), c=0.942 3(4) nm, β=112.872(5)°, V=1.433 0(10) nm³, Z=4, D_c=2.104 Mg·m^-3, μ(Mo Kα)=2.615 mm^-1, F(000)=904, T=298(2) K, 4 480 reflections collected, 2 470 independent (R_int=0.032 2), the final R=0.058 4 and wR₂=0.145 7 for 2 303 observed reflections with I>2σ(I). CCDC: 192520.     

Investigation of the Cu-Zr-Y oxides activity in the carbon black catalytic oxidation by differential thermal analysis and temperature programmed reduction

Different copper/zirconium-yttrium catalysts have been tested in carbon black oxidation reaction. Supported mainly on differential thermal analysis and temperature programmed reduction, two different mechanisms have been proposed to explain the catalytic results. In the absence of copper, it has been shown that Zr³⁺ ions and associated anionic vacancies are responsible to the catalytic enhancement observed in the mixed oxides, oxygen species being activated on these sites. Among mixed zirconia-yttria solids, ZrO₂-5 mol%Y₂O₃ is the most active catalyst. Copper impregnation on these oxides leads to the formation of different copper species. Small particles of CuO in low interaction with the support, induce a catalytic improvement due to the highest reducibility of these species. Moreover, in order to be more efficient, CuO species should have some interactions with the support, since impregnated samples are more active than the simple mechanical mixtures.     

Thermal decomposition study of the coordination compound [Fe(urea)6](NO3)3

The thermochemical behavior of the coordination compound [Fe(urea)₆](NO₃)₃ was studied by simultaneous CG–TG–DTG–DTA and mass spectrometry methods non-isothermal conditions. The compound decomposes at 200 °C into a mixture of spinel-type oxides and hematite. The nature and particle size of the final decomposition products are strongly associated with the conditions during the thermal treatments, in particular the heating rate and the calcination temperature. A certain fraction of the products are formed as nanometric particles; they show superparamagnetic behavior at room temperature. The comparably low temperature of the calcination treatments of this compound is a promising perspective to attain small sized magnetic powders.     

Phase separation and disorder in half metallic ferromagnetic manganite thin films: A theoretical study looking forward low noise nano-devices

The resistivity of thin La_0.7Sr_0.3MnO₃ films was first investigated in a wide temperature (T) range (10–750 K). Films grown by different techniques and on several substrates enabled to analyze samples with different amounts of disorder. The aim of this work was to elucidate the nature of the metal–insulator (M–I) transition occurring at T = T_p in these films and its relation with the different kinds of inhomogeneities they could present like intrinsic electric disorder and co-existence of two different electrical and/or magnetic phases. The low-temperature resistivity state was described mostly by a law which scales as T with  ≈ 2.5. This supports the theoretical proposal of single magnon scattering in presence of minority spin states localized by the disorder. In the whole range of temperatures the experimental data are found to be consistent with a phase separation (PS) scenario. In order to go through the origin of the characteristic length scale of inhomogeneity found, preliminarily low frequency noise measurements as a function of T in a range of temperature around the M–I transition were made. The samples used were patterned using photolithography into bridges with various widths and lengths. No clear sign of separation phase dynamic has been observed in our noise measurements. Unexpectedly the normalized Hooge parameter _H/n was found not to be volume (Ω) independent. The LSMO electrical properties may strongly be driven by disorder and new design for magnetoresistance sensors may have to take into account their intrinsic PS.     

Improved relativistic energy-consistent pseudopotentials for 3d-transition metals

Energy-consistent relativistic pseudopotentials for 3d-transition metals Sc to Ni based on modified valence energies are proposed. The pseudopotentials are adjusted at the finite difference level within the intermediate coupling scheme with respect to multi-configuration Dirac–Hartree–Fock data based on the Dirac–Coulomb Hamiltonian with an estimate of the Breit contributions in quasidegenerate perturbation theory. Typically a few hundred to thousand J levels arising from about 35 to 40 configurations ranging from the anion down to the highly charged cation are considered as references. It is shown that introducing a small common energetic shift of all valence energies reduces the errors in the parameter adjustment considerably. Results of highly correlated atomic and molecular test calculations using large basis sets and basis set extrapolation techniques are presented. To be submitted to Theoretical Chemistry Accounts (special volume on the occasion of Prof. Dr. H. Stoll's 60th birthday)