Ester Elimination: A General Solvent Dependent Non-Hydrolytic Route to Metal and Mixed-Metal Oxides

Molecular routes to metal oxides has become an area of intensescientific interest due to the technological relevance of thesematerials. Molecular routes are proving important as a result ofthe possibility to control the physical and chemical propertiesof the final materials.We have chosen to study non-hydrolytic methods, namely esterelimination reactions between two prototypical molecularprecursors metal alkoxides, M(OR)_n, and metal carboxylates, M(O₂CR)_n, to synthesize metal oxides: This method allows for the synthesis of pure metal oxides bycomplete elimination of the organic supporting ligands withconcomitant formation of M-O-M bridges.Furthermore, incomplete esterelimination can lead to isolation of molecular clusters asintermediates which can also be used as building blocks for theformation of metal oxides with controlled microstructure.Here we report a series of reactions between Sn and Si alkoxidesand carboxylates designed to gain further insight into thefactors governing ester elimination reactions. By choosingcompounds with varying coordination environments and stericaccessibility we have devised a set of criteria which shouldallow for successful ester elimination between metal alkoxide andcarboxylate compounds. Furthermore we have also shown theability of ester elimination derived molecular clusters withspecific microstructure to be used in the synthesis of bulkmaterials retaining the structural attributes of the precursor cluster.     

纳米晶MgSO4·5Mg(OH)2·3H2O合成与表征

纳米材料由于具有表面、体积和量子尺寸效应的特殊性而受到广泛重视[1～3]. 微米级硫氧镁晶须作为塑料添加增强和阻燃剂已有报道[4～7]. 纳米晶MgSO4*5Mg(OH)2*3H2O不仅对塑料起补强作用, 而且其粒度小, 使塑料变得更致密, 强度、韧性与防水性能大大提高. 目前纳米材料的合成方法多种多样[8～10], 本文采用水热法制得纳米硫氧镁晶粒, 产物纯度高、分散性好且粒度易控制.     

Surface oxides on porous carbon

Wet oxidation of BPL porous carbon by H₂O₂ and HNO₃ changes the pore structure and also increases the concentration of surface oxides. KOH uptake is increased by oxidation and is seen to be dependent on KOH concentration and to a lesser extent on inert electrolyte concentration. Enthalpy of immersion measurements have allowed the estimation of the enthalpy of hydration of the surface oxides and the enthalpy of neutralization of the easily accessible acid oxides.     

LnSrNiO4-λ系列复合氧化物的物化性质与对NO分解的催化性能

用柠檬酸络合法合成了Ｋ２ＮｉＦ４结构的ＬｎＳｒＮｉＯ４－λ（Ｌｎ＝Ｌａ，Ｐｒ，Ｎｄ，Ｓｍ，Ｇｄ）系列稀土取代类钙钛石型复合氧化物催化剂，对该系列催化剂的固态物理、化学性质及其对ＮＯ分解的催化性能进行研究。结果表明，该系列复合氧化物催化剂对ＮＯ分解活性都很高，在此基础上对该系列复合氧化物中稀土元素对ＮＯ分解反应的取代效应进行了探讨。     

Heterogeneous Catalytic Partial Oxidation of C3-C4 Alkanes with Nitrogen Monoxide

The possibility of making products of partial oxidation, alcohols and acids in particular, by the reaction of C₃-C₄ alkanes with nitrogen monoxide over oxide and zeolite catalysts is demonstrated. The most effective catalysts are CeO₂ and Fe-TsVK. The dependence of the rate and selectivity of the process on the reaction conditions has been established.     

Products of lithium interaction with nanostructured oxides SnO2-TiO2 and mechanism of charge-discharge of electrodes in a lithium-ion battery

Products of lithium interaction with thin-film nanostructured SnO₂-TiO₂ (ST) oxides are studied with the aid of x-ray diffraction analysis and Moessbauer spectroscopy on the ¹¹⁹Sn nuclei. Electrochemical properties of a series of the ST electrodes with different concentrations of TiO₂ varied from 0 to 20 mol % are also examined. It is concluded that the specific feature of the charge-discharge mechanism of the ST electrodes is a significant participation of oxygen in reversible reactions during insertion and extraction of lithium as compared with an alloying mechanism of operation of tin-containing anodes. The leading role in this is played by titanium oxide. Remaining stable towards reduction by lithium, it facilitates the holding of the neighboring layers of SnO₂ in a nanodisperse state and in an oxidized state. The effect of a decrease in the capacity degradation in modified TiO₂ electrodes, which is discovered in this work, is attributed to the hampering of the growth of nanocrystallites of β-Sn by interlayers of tin and titanium oxides mentioned above.     

Simple route to secondary amides of phosphorylacetic acids and their use for extraction and sorption of actinides from nitric acid solutions

An efficient method for the synthesis of secondary alkylamides of phosphorylacetic acids (APA) was proposed. The method involves amidation of ethyl phosphorylacetates with primary aliphatic amines. The scope of reaction was determined. Reactions with ethylenediamine and 1,4-diaminobutane yield the corresponding bisamides; in the case of 1,3-diaminopropane, N-(3-aminopropyl)diphenylphosphorylacetamide or N,N-propylenebis(diphenylphosphorylacetamide) was obtained, depending on the reaction conditions. The extraction of americium(III) complexes and the sorption of uranium(VI) by sorbents with physically sorbed APA from nitric acid solutions were studied. There is no correlation between the partition coefficient of americium(III) and the structure of APA; in the sorption of uranium(VI), the degree of extraction depends on the complexone structure.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2394–2402, November, 2004.     

Performance of the diffusive gradients in thin films technique for measuring Ca and Mg in freshwater

Measurements of the major cations Ca and Mg by the technique of diffusive gradients in thin films (DGTs) were systematically evaluated. The concentration in solution was calculated using Fick’s first law of diffusion from the directly measured flux to the DGT device. A selective cation exchange resin (Bio-Rad Chelex^®100), which has been used extensively with DGT for trace metals, such as Cd²⁺, Cu²⁺ and Ni²⁺, was used for this work.

Elution of Ca and Mg from the resin with 1 M HNO₃ was very reproducible. Measurements of Ca and Mg concentrations in synthetic solutions agreed well with the theoretical predictions. The negative response on uptake caused by lowered pH was investigated. Uptake was found to decline below pH 5. The capacity of the DGT device for Ca and Mg was also investigated to establish maximum deployment times for given concentrations.

Experiments with filtered and modified lake water show that DGT can be used to measure Ca and Mg when trace metals are present in the solution. An in situ deployment of DGT combined with an ultrafiltration study suggest that the Mg concentration measured by DGT is similar to the concentration found in the fraction <1 kDa.     

Reaction of magnesium alkylidene carbenoids with lithium acetylides and lithium thiolates: a novel synthesis of conjugated enynes and vinyl sulfides

Magnesium alkylidene carbenoids were generated from 1-chlorovinyl p-tolyl sulfoxides with i-PrMgCl at −78 °C in THF or toluene via the sulfoxide-magnesium exchange reaction. Reaction of the generated magnesium alkylidene carbenoids with lithium acetylides or lithium thiolates gave conjugated enynes or vinyl sulfides, respectively, in moderate to good yields. The intermediate of this reaction was found to be the alkenyl anion and it could be trapped with some electrophiles to give tetra-substituted conjugated enynes and vinyl sulfides.     

SOLID STATE CHEMISTRY OF La_(1-x)Li_(x)MnO_3 AND RELATED COMPOUND

A series of perovskite type oxides La_(1-x)A_(x)MnO_3(x=0.1 for A=Li,Na,K;x=0.1～0.5 for A=Li)have been prepared by impregnation.Experimental results showed that the substitution of La~(3 ) by Li~ inLaMnO_(3 ?) greatly increased the selectivity to ethane and ethylene for theoxidative coupling of methane.Temperature-programmed desorption of oxygenproved the presence of oxygen vacancies in the oxide lattice.The higher Mn~(4 )/Mn_t ratio in oxide made the formation of oxygen vacancies easier on the oxidesurface.The general formula of the oxides is La_(1-x)Li_(x)Mn＇V＇_(y)O_(3-y),V=vacancy.