Defect and dopant properties of MgTa2O6

Atomistic computer simulation techniques have been used, for the first time, to reproduce the crystal structure of MgTa₂O₆ and to investigate the defect chemistry and dopant properties of this material. The calculated defect energetics suggest that the concentration of intrinsic atomic defects in this phase is insignificant and that the system is probably stable to both oxidation and reduction. Dopant solution energy versus ion size trends are found for both isovalent and aliovalent dopant incorporation at Mg and Ta sites. Divalent dopants (e.g. Ca, Cu) preferentially occupy the Mg site whereas dopants with higher charge (e.g. Sc, Zr, Nb) are more favorable on the Ta site. High migration activation energies (>2 eV) predict limited ionic conductivity in this material.     

Deprotonation of chloropyridines using lithium magnesates

4-Chloropyridine was deprotonated on treatment with 1/3 equiv of the highly coordinated magnesate Bu₃(TMP)MgLi₂ in THF at −10 °C, as evidenced by trapping with I₂. The use of Bu(TMP)₂MgLi in Et₂O allowed the reaction of 2-chloropyridine, giving the 3-functionalized derivative as the main product. Mixtures of 3- and 4-functionalized derivatives were obtained when 2,6-dichloropyridine was involved in the reaction. Performing the reaction on 3-chloropyridine with lithium magnesates in THF, either the 4,4′-dimer or the 4-iodo derivative was formed after quenching by I₂, the former using 1/3 equiv of Bu₂(TMP)MgLi and the latter using 1 equiv of (TMP)₃MgLi. Similar results were observed with 3,5-dichloropyridine, 2,5-dichloropyridine and 3-chloro-2-fluoropyridine. 1,2-Migration of the lithium arylmagnesate formed by deprotonation was proposed to justify the dimers formation.     

Gas-chromatographic analysis of carbides in aluminium and magnesium

Summary A quantitative gas-chromatographic method (molecular sieve column, FID) for the determination of Al₄C₃ in aluminium and magnesium has been developed. The effect of methane from external sources has been investigated and eliminated. Metallographic analysis of carbides in polished specimens were consistent with the gas-chromatographic measurements within a factor of 2. The discrepancy can be explained by the large uncertainties in light microscopy analysis of the small carbides. Analysis of commercial magnesium shows that the metal contains ca. 2–9 ppm of Al₄C₃. The concentration of carbides in aluminium from the electrolysis cell is in the range of 10–35 ppm and in the final product of ca. 2–12 ppm Al₄C₃. CaC₂ has been detected in a few magnesium and aluminium samples by means of gas-chromatography and microprobe analysis.

---

Gas-chromatographische Analyse von Carbiden in Aluminium und Magnesium

Zusammenfassung Zur Bestimmung von Al₄C₃ in Aluminium und Magnesium wurde eine quantitative gas-chromatographische Methode (MolekularsiebSäule, FID) entwickelt. Der Einfluß von Methan aus äußeren Quellen, wurde untersucht und ausgeschaltet. Die metallographischen Untersuchungen von Carbiden an polierten Proben stimmten mit den Ergebnissen der gas-chromatographischen Messungen mit einem Faktor von 2 überein. Der Unterschied kann durch die großen Unsicherheiten bei der lichtmikroskopischen Analyse der kleinen Carbide erklärt werden. Die Analyse des technisch reinen Magnesiums zeigt, daß das Metall ca. 2–9 ppm Al₄C₃ enthält. Die Konzentration von Carbiden in elektrolytisch raffiniertem Aluminium liegt im Bereich 10–35 ppm und im Endprodukt bei ca. 2–12 ppm Al₄C₃. CaC₂ wurde in einigen Magnesium- und Aluminiumproben mit Hilfe von gas-chromatographischen und Mikrosondenuntersuchungen festgestellt.

     

Insertion Reactions of Carbon Disulfide into Mg‐C and Mg‐N Bonds: Syntheses and Structural Determinations of Mg(S2CY)2(THF)n(Y=NEt2, NiPr2, iPr,Ph) and BrMg(S2CZ)(THF)3(Z=Ph,iPr)

The insertion reaction of CS₂ with Mg(NR₂)₂ (R= Et, ⁱPr), MgR′₂ (R′= Et, Ph) and R″MgBr (R″= ⁱPr, Ph) respectively lead solid products, Mg(S₂CNR₂)₂(THF)_n ( 1 : R= Et, n=2; 2 : R= ⁱPr, n=1), Mg(S₂C′R)₂(THF)₂ ( 3 : ′R= Et, 4 : ′R= Ph), BrMg(S₂C″R) (THF)₃ ( 5 : ″R= ⁱPr, 6 : ″R= Ph) in which the inserted carbon disulfides act as terminal chelating ligands. These compounds were characterized with ¹H, ¹³C NMR, IR spectroscopy, mass spectrometry, elemental analyses, and X‐ray crystallography.     

Structural Patterns and Dimensionality in Magnesium Borophosphates: The Crystal Structures of Mg2(H2O)[BP3O9(OH)4] and Mg(H2O)2[B2P2O8(OH)2]·H2O

Hydrothermal investigations in the system MgO/B₂O₃/P₂O₅(/H₂O) yielded two new magnesium borophosphates, Mg₂(H₂O)[BP₃O₉(OH)₄] and Mg(H₂O)₂[B₂P₂O₈(OH)₂]·H₂O. The crystal structures were solved by means of single crystal X‐ray diffraction. While the acentric crystal structure of Mg₂(H₂O)[BP₃O₉(OH)₄] (orthorhombic, P2₁2₁2₁ (No. 19), a = 709.44(5) pm, b = 859.70(4) pm, c = 1635.1(1) pm, V = 997.3(3) × 10⁶ pm³, Z = 4) contains 1D infinite chains of magnesium coordination octahedra interconnected by a borophosphate tetramer, Mg(H₂O)₂[B₂P₂O₈(OH)₂]·H₂O (monoclinic, P2₁/c (No. 14), a = 776.04(5) pm, b = 1464.26(9) pm, c = 824.10(4) pm, β = 90.25(1)°, V = 936.44(9) × 10⁶ pm³,Z = 4) represents the first layered borophosphate with 6³ net topology. The structures are discussed and classified in terms of structural systematics.     

Conductivity as a Sensor for Monitoring Relative Magnesium Corrosion Rates in Real‐time,in Serum‐containing Media under Cell Culture Conditions

Because controlling the corrosion rate of magnesium metal will be crucial to the success of biomedical implants containing pure magnesium or magnesium alloys, many ways have been sought to improve in vitro tests to analyze corrosion rates, and also to identify new methods of preparing or post‐processing magnesium. In this work, for an in vitro assay, we explored the use of a commercially available conductivity sensor to study magnesium corrosion under cell culture conditions that duplicate many physiologically appropriate parameters. With this sensor, we studied the corrosion of two previously untested magnesium single crystal samples that differed in surface treatments that could alter corrosion rates. The results show that the relative conductivity changes in (mS/cm) over the total time of immersion were proportional to the corrosion rates in (mm/y) and also to the total magnesium released, as detected by inductively coupled plasma mass spectrometry (ICP‐MS).     

Correlation between Boron Isotope of Coral Acropora and pH Value of Seawater Surface

A water circulation system with the almost same element composition and socket type was adopted in coral Acropora culture under different seawater pH value conditions and the data of the relationship between boron isotopic compositions of coral and seawater pH value by thermoelectric ionization mass spectrometer were obtained. According to the correlations between α_carb-3 of coral and the pH value of cultured seawater, α_carb-3 was not a constant but related to pH value, indicating that B(OH)₃ also incorporated carbonate. Therefore, the theoretical formula could not be used to calculate the seawater pH value from the δ¹¹B_carb value of the measured marine biological carbonate. The empirical equations obtained experimentally would be an alternative method to calculate the seawater pH value. In addition, the mixed precipitation of CaCO₃ and Mg(OH)₂ was found in aquaculture tanks with high pH value, and the δ¹¹B of the solid was significantly higher than that of cultured seawater. The result indicated that the presence of Mg(OH)₂ had a significant effect on the boron isotope fractionation, which deserved our attention.     

Can a ‘magnesium sulfate admixtured l-threonine’ crystal be grown by slow evaporation solution growth method?

Slow evaporation of an aqueous solution containing l-threonine and magnesium sulphate heptahydrate, results in the fractional crystallization of the less soluble l-threonine crystal and not any novel optoelectronic ‘magnesium sulfate admixtured l-threonine’ crystal as reported by Puhal Raj et al. in Optik, 124 (2013) 6887–6891.