第一性原理研究Ir的热力学和弹性性质

基于准谐近似理论,运用第一性原理投影缀加波方法研究了Ir的热力学和弹性性质,得到Ir的声子谱、状态方程、热容、熵、焓和线膨胀系数,以及弹性常数、弹性模量、剪切模量和杨氏模量随温度的变化关系.结果表明,计算的Ir声子谱和有限的实验测量结果一致;考虑电子对体系自由能贡献后计算的热容、熵、焓和线膨胀系数与实验值符合较好;在2600 K时,Ir的电子定压热容占总定压热容的17％,因此在高温时电子对Ir定压热容的贡献是不能忽略的;理论预测的Ir室温下的弹性常数、弹性模量、剪切模量、杨氏模量和实验值测量值基本吻合,并随温度的增加而逐渐减小.     

LaAlO3/SrTiO3界面的电子结构及光学性质的第一性原理研究

采用基于密度泛函理论框架下的第一性原理平面波超软赝势方法,结合局域密度近似(LDA)研究了钙钛矿结构氧化物LaAlO3/SrTiO3界面的电子结构及光学性质.能带结构分析表明当形成(AlO2)-/(TiO2)0界面时其禁带宽度为1.888 eV,呈现绝缘体的性质,当形成(LaO)+/(SrO)0界面时其禁带宽度为0.021eV,呈现半导体或半金属性质.同时,对不同界面的光学性质也进行了研究,结果表明纯相的LaAlO3和SrTiO3的吸收系数、反射系数及能量损失谱强度明显高于由这两种单质形成不同界面的强度.     

Interaction and local magnetic moments of metal phthalocyanine and tetraphenylporphyrin molecules on noble metal surfaces

In order to understand the Kondo effect observed in molecular systems, first-principles calculations have been widely used to predict the ground state properties of molecules on metal substrates. In this work, the interaction and the local magnetic moments of magnetic molecules （3d-metal phthalocyanine and tetraphenylporphyrin molecules） on noble metal surfaces are investigated based on the density functional theory. The calculation results show that the dz2 orbital of the transition metal atom of the molecule plays a dominant role in the molecule-surface interaction and the adsorption energy exhibits a simple declining trend as the adsorption distance increases. In addition, the Au（111） surface generally has a weak interaction with the adsorbed molecule compared with the Cu（ll 1） surface and thus serves as a better candidate substrate for studying the Kondo effect. The relation between the local magnetic moment and the Coulomb interaction U is examined by carrying out the GGA＋U calculation according to Dudarev＇s scheme. We find that the Coulomb interaction is essential for estimating the local magnetic moment in molecule-surface systems, and we suggest that the reference values of parameter U are 2 eV for Fe and 2-3 eV for Co.     

高氧空位浓度对金红石TiO2导电性能影响的第一性原理研究

采用基于密度泛函理论的平面波超软赝势方法研究了 纯的和不同高氧空位浓度金红石型TiO_2-x (x=0, 0.083, 0.125, 0.167, 0.25)超胞的能带结构分布、态密度分布.同时, 采用局域密度近似+U方法调准了带隙.结果表明, 高氧空位浓度越高, 金红石型TiO₂的最小带隙越变窄、电子有效质量越减小, 自由电子浓度越高, 电子迁移率越低、电导率越低.计算结果与实验结果的变化趋势相符合. 关键词： 高氧空位 2')" href="#">金红石型TiO₂ 电导率 第一性原理     

A comparison of different entransy flow definitions and entropy generation in thermal radiation optimization

In thermal radiation, taking heat flow as an extensive quantity and defining the potential as temperature T or the black body emissive power U will lead to two different definitions of radiation entransy flow and the corresponding principles for thermal radiation optimization. The two definitions of radiation entransy flow and the corresponding optimization prin ciples are compared in this paper. When the total heat flow is given, the optimization objectives of the extremum entransy dissipation principles （EEDPs） developed based on potentials T and U correspond to the minimum equivalent temperature difference and the minimum equivalent blackbody emissive power difference respectively. The physical meaning of the definition based on potential U is clearer than that based on potential T, but the latter one can be used for the coupled heat transfer optimization problem while the former one cannot. The extremum entropy generation principle （EEGP） for thermal radiation is also derived, which includes the minimum entropy generation principle for thermal radiation. When the radiation heat flow is prescribed, the EEGP reveals that the minimum entropy generation leads to the minimum equivalent thermodynamic potential difference, which is not the expected objective in heat transfer. Therefore, the minimum entropy generation is not always appropriate for thermal radiation optimization. Finally, three thermal radiation optimization examples are discussed, and the results show that the difference in optimization objective between the EEDPs and the EEGP leads to the difference between the optimization results. The EEDP based on potential T is more useful in practical application since its optimization objective is usually consistent with the expected one.     

“力的独立作用原理”处理曲线运动的优越性

复杂的曲线运动问题,能考查、评价学生对物理知识的综合把握能力.由于高中阶段所讲的曲线运动主要是抛体运动和圆周运动,因而对一般的曲线运动问题的处理就成为难点.如果运用力的独立作用原理,采取"分而治之"的策略,往往能起到化繁为简、出奇制胜的效果.因此,有必要把"力的独立作用原理,,作为处理物理问题的基本方法,在教学中采用适当的方式渗透给学生,使其在应用中把握内涵.     

Towards understanding the carbon trapping mechanism in copper by investigating the carbon-vacancy interaction

We propose a vacancy trapping mechanism for carbon-vacancy (C-V) complex formation in copper (Cu) according to the first-principles calculations of the energetics and kinetics of C-V interaction. Vacancy reduces charge density in its vicinity to induce C nucleation. A monovacancy is capable of trapping as many as four C atoms to form CnV (n=1,2,3,4) complexes. A single C atom prefers to interact with neighboring Cu at a vacancy with a trapping energy of 0.21 eV. With multiple C atoms added, they are preferred to bind with each other to form covalent-like bonds despite of the metallic Cu environment. For the CnV complexes, C2V is the major one due to its lowest average trapping energy (1.31 eV). Kinetically, the formation of the CnV complexes can be ascribed to the vacancy mechanism due to the lower activation energy barrier and the larger diffusion coefficient of vacancy than those of the interstitial C.     

立方钙钛矿RbZnF3电子、弹性和光学性质的第一性原理研究

基于密度泛函理论和赝势平面波方法研究了立方钙钛矿RbZnF3的电子结构和光学性质;利用静水有限应变技术计算研究了RbZnF3弹性常数Cij、体积弹性模量B和剪切模量G随压力的变化关系。基态下,RbZnF3晶格常数a和体积弹性模量B0计算值与实验值以及其他理论值一致。根据能带结构、总态密度以及分波态密度分析可知：基态下立方钙钛矿结构RbZnF3为间接带隙半导体材料,带隙为3.57eV,与其他计算结果比较,本文计算结果偏低,这是由于局域密度近似(LAD)或广义梯度近似(GGA)交换关联函数的局限性所致。基态下RbZnF3的Mulliken电荷分布和集居数说明：RbZnF3属于共价键和离子键所形成的混合键化合物;RbZnF3的电荷总数主要来源于Rb 4s和4p轨道,Zn 3d轨道,以及F 2s和2p轨道。电荷主要从Rb, Zn原子向F原子转移。同时,本文还计算研究了RbZnF3的光学介电函数、吸收系数、复折射率、能量损失谱和反射系数等光学性质。     

基于半偏法探究测量中的电阻条件

半偏法是中学里直接利用待测电表及其他的电学原件组合以达到测量其阻值的方法. 而关于半偏法 实验中,各电学器件电阻间应满足怎样的大小关系,方能减小实验误差,以达到提高实验的准确性,是一个值得深 思的问题. 立足于常见电流表及电压表内阻的实验测量,通过半偏法实验误差分析,结合高考实例,定量探析其测 量原理背后各电阻需要满足的定量条件,以便读者在后期实验方案中能及时作出评估或改良     

B、N掺杂对钠在石墨烯上吸附性能的影响

采用基于密度泛函理论的第一性原理方法,研究了本征石墨烯及缺陷石墨烯对Na原子的吸附行为.主要研究了三种石墨烯:本征石墨烯、B掺杂的石墨烯和N掺杂的石墨烯.结果表明,与本征石墨烯相比,B掺杂的石墨烯和N掺杂的石墨烯在吸附能、电荷密度、态密度和储钠量方面表现出很大的差异.B掺杂的石墨烯对Na原子的吸附能是-1.93 e V,约为本征石墨烯对Na原子吸附能的2.7倍;与本征石墨烯相比,N掺杂的石墨烯对Na原子的吸附能明显增大.态密度计算结果表明,Na原子与B掺杂的石墨烯中的B原子发生轨道杂化,而本征石墨烯和N掺杂的石墨烯中不存在轨道杂化现象.B掺杂的石墨烯对Na原子的吸附量是3个,与本征石墨烯相比显著提高.因此,B掺杂的石墨烯有望成为一种新型的储钠材料.