Synthesis,characterization, spectroscopy and thermal analysis of rare earth picrate complexes with <Emphasis Type="Italic">L</Emphasis>-lysine

Summary Rare earth picrate (RE) complexes with L-lysine (Lys) were synthesized and characterized. Elemental analysis (CHN), EDTA titrations and thermogravimetry data suggest a general formula RE(pic)₃·2Lys·2H₂O, where RE=La-Lu (without Pm) and Y, pic=picrate). IR spectra suggest that Lys is coordinated to the central ion through the nitrogen of the α-amino group. Parameters obtained from the absorption spectrum of the Nd compound indicated that the metal-ligand bonds are essentially electrostatic. Emission spectrum and biexponential behavior of the luminescence decay of the Eu compound suggest the existence of polymeric species. Thermogravimetric/derivative thermogravimetric (TG/DTG) and differential scanning calorimetry (DSC) curves of all complexes are very similar, with five events. The final products are the corresponding rare earth oxides and their X-ray diffraction patterns are identical to the calcinated oxides.</o:p>     

稀土复合变质对新型铸造热锻模具钢组织与性能的影响

研究了稀土复合变质对新型铸造热锻模具钢（CHD钢）组织与性能的组织。结果表明，稀土复合变质能细化晶粒，并且随着稀土量的增加。细化效果明显；加入适量的稀土复合变质后，夹杂物数量明显减少，夹杂物趋于球化并均匀地分布在钢中，形态和分布得以了改善，向钢中加入稀土进行复合变质，能促进贝氏体、奥氏体和位错亚结构的形成，细化马氏体板条。当残留稀土含量为0.02%时，CHD钢的硬度、强度变化不大，断裂韧性（KIC）和疲劳裂纹扩展门槛值（△Kth）有所提高，冲击韧性、延伸率、断面收缩率提高了近一倍，抗热疲劳性能也最好。     

Thermal coefficient of linear expansion of non-crystalline chalcogenides in the As-S-Se-Te-I system

The object of the paper is an investigation of the glasses of the (As₂S₃)_x(AsSe_0.5Te_0.5I)_100-x. type for 65≤;x≤;95, using methods of thermomechanical analysis. Values of the thermal coefficients of linear expansion in solid and visco-plastic phase were determined. it was shown that introducing arsenic-sulfide in glass-matrix AsChI, i.e. (AsSe_0.5Te_0.5I), leads to an increasing stability of these glasses. The characteristic temperatures of softening Tg and the temperature of the beginning of deformation t_w increase by increasing content of As₂S₃. The analytical forms of dependence of four significant physical values α_g, α_l, Tg, Tw, as a function of As₂S₃ content in the structure of glasses were fitted. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermoanalytical investigation of layered titanium salts

The investigated materials have similar routes of thermal decomposition; i.e. they lose their crystal water first, then at a higher temperature their structural one. At least the result TiP₂O₇ goes through a phase change at about 1000 K. The amorphous titanium phosphate lost its crystal and structural water at higher temperature than those of crystalline forms. Both α- and γ-titanium phosphates and also their transition metal containing forms have layered structure. In case of α- and γ-forms after the loss of crystal water a phase change occurs which is followed by the decomposition of the molecule. Various transition metals containing γ-titanium phosphates lose their crystal water at the same temperature, with the exception of Ni containing ones. The process is finished in this case at temperature 90 K higher than that of the others. This revised version was published online in July 2006 with corrections to the Cover Date.     

散射背景下激光热透镜光谱分析法测定人体血清中锌量

建立了散射背景下测定人体血清中Zn^2＋含量的激光热透镜光谱分析方法。比较了蛋白质微粒散射对于分光光度法和激光热透镜光谱分析法测定的影响。结果表明，激光热透镜光谱分析方法能够避免溶液中存留蛋白质微粒散射的影响。Zn^2＋量在0～1．6μg/mL范围内呈线性关系（r=0．9986），检出限为1ng/mL。应用于人体血清中Zn^2＋含量的测定，与原子吸收法测定结果基本一致。     

Thermal Stability Of Folic Acid in the solid-state

This study attempts to identify the degradative process which folic acid undergoes in the solid-state under thermal stress. In order to facilitate the process, the various pieces of the chemical structure, namely, p-amino benzoic acid, pterin and glutamic acid as both its d- and l-isomers were investigated as separate entities. These structured solid-state pieces were then compared to the composite solid state folic acid degradative curves in order to identify the peaks seen and provide direction for the interpolation of the degradative mechanism. It was observed that none of the structural pieces could be superimposed as assumed earlier and hence an attempt was made to identify the decomposition products using various analytical techniques such as infrared spectroscopy, mass spectroscopy and X-ray diffraction which suggested that the glutamic acid fragment is lost first as evidenced by acid loss and amide enhancement in the IR spectra. The vitamin was ultimately degrading to carbon fragments and that further identification was not necessary. This revised version was published online in August 2006 with corrections to the Cover Date.     

Memory effects in isothermal crystallization II. Isotactic polypropylene

The effects of temperature and duration of melting on the rate of isothermal crystallization of isotactic polypropylene were investigated by differential scanning calorimetry (DSC). Crystallization rates were found to decrease with increasing melt temperature and melting time. The results were discussed in the framework of the theoretical model of transient isothermal crystallization developed by the present authors [1]. The results suggest gradual destruction of predetermined nuclei with activation energyE _a=89±7 kJ/mole as a main mechanism of the observed effects.This work and Part I of this research [1] have been supported in part by Research Grant Number PB 1291/52/93/04 from State Committee for Scientific Research (KBN), Poland, and by 40% MURST founds, Italy.     

XPS,AFM, ATR and TPD evidence for terraced,dihydrogen terminated, 1×1 (100) silicon

Heating (100) silicon at high temperature (say, higher than 850 °C) in H₂, cooling to 670–700 °C in the same ambient, and quenching to room temperature in N₂ results in environmentally robust, terraced 1 × 1 (100) SiH₂. Evidence for this conclusion is based on angle‐resolved x‐ray photoelectron spectroscopy, atomic force microscopy, infrared absorption spectroscopy in the attenuated total reflection mode, thermal programmed desorption, and reflection high‐energy electron diffraction. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis, Characterization and Thermal Decomposition Mechanism of Cetyltrimethyl Ammonium Tetrathiotungstate

The synthesis, characterization and thermal decomposition mechanism of cetyltrimethyl ammonium tetrathiotungstate （CTriMATT） were studied herein. The as-synthesized CTriMATT was characterized by Elemental analysis, X-ray diffraction （XRD）, Fourier transform infrared （FT-IR）, Ultraviolet visible （UV-Vis） spectra. The results showed that the as-synthesized CTriMATT had high purity and good crystallinity. The introduction of alkyl groups induced a shift of the stretching vibration band of W-S bond to lower wavenumber, while it had no influence on the position of WS4^2-. Thermogravimetric analysis （TG）, differential thermal analysis （DTA） and in situ XRD characterizations revealed that CTriMATT began to decompose at 423 K in nitrogen and was converted to WS2 eventually. In addition, the decomposition product of CTriMATT at 673 K in nitrogen was characterized by N2 adsorption （BET） and scanning electron microscopy （SEM）. The results demonstrated that WS2 with higher specific surface area, and pore volume could be obtained from the thermal decomposition of CTriMATT in nitrogen.     

A comparative study on the thermal decomposition of some transition metal carboxylates

Thermal decomposition of transition metal malonates, MCH₂C₂O₄?xH₂O and transition metal succinates, M(CH₂)₂C₂O₄?xH₂O (M=Mn, Fe, Co, Ni, Cu, Zn) has been studied employing TG, DTG, DTA, XRD, SEM, IR and Mössbauer spectroscopic techniques. After dehydration, the anhydrous metal malonates and succinates decompose directly to their respective metal oxides in the temperature ranges 310–400 and 400–525°C, respectively. The oxides obtained have been found to be nanosized. The thermal stability of succinates have been found to be higher than that of the respective malonates.