Near-field thermoelastic imaging coupled with infrared detection

Near-field thermoelastic imaging is a simple way to investigate the thermal and coupled thermoelastic properties of materials. A few microscopes, deriving from the atomic force microscope, have been used to observe and to quantify the samples observed. But the main problem is the absolute measurement of the temperature, because surface topography and thermal expansion contributions are not easily discernible. In the proposed SThEM (scanning thermoelastic microscope), the tip is excited at the resonance frequency of the cantilever and the sample is periodically heated by the Joule effect. Thus the static contributions (drift, topography) are reduced. Moreover, a radiometric sensor, operating in the far field, has been added in order to quantify the temperature. This multi-acquisition microscope enables one to investigate small objects at the nanoscale with complementary information at the micrometric scale.     

Dynamic mechanical analysis

Using dynamic mechanical analysis (DMA) we have studied thermal degradation for a system containing a diglycidyl ether of bisphenol A (DGEBA) and 1,3-bisaminomethylcylohexane (1,3-BAC). The changes of dynamic mechanical properties during thermal degradation indicated a shift of the glass transition temperature (T _g) to higher temperatures and a decrease in the peak value of the dynamic loss factor (tan δ) with an increasing of aging time. The value of dynamic storage modulus (E′) at the rubbery state showed an increase with aging time, whiteE′ at the glassy state only underwent a moderate change with increased thermal degradation. From these results it can be argued that thermal degradation during the stage prior to the onset of the severe degradation involves structural changes in the epoxy system, as further crosslinking and loss of dangling chains in the crosslinked network.     

A new technique for spatially resolved thermal lensing measurements

A new method is presented for spatially resolved thermal lensing measurements using multiple narrow probe beams and a two-dimensional array detector. The method is applied to an Er, Tm, Ho: YAG laser rod. No significant deviation from a parabolic temperature profile has been found although there is extraordinarily strong thermal lensing in the crystal. Thermo-optical constants of the material are reported.     

Thermal conductivity of poly(vinyl chloride)/polycaprolactone blends

Thermal diffusivity, heat capacity, and density of polyvinyl chloride/polycaprolactone (PVC/PCL) blends were measured by the laser flash method, DSC, and pycnometry, respectively. The thermal conductivity of the PVC/PCL blends was determined from the results. The miscibility of the blend and crystallinity of PCL were determined by DSC. The effect of blend structure on thermal conductivity is discussed. The phase compositions of the PVC/PCL blends are of three types depending on PCL content: i.e., up to 33%, from 33 to 70%, and above 70% PCL by weight. Thermal conductivity, thermal diffusivity, and heat capacity of the PVC/PCL blends are strongly affected by the phase composition of the blend, which changes in a complicated way with PCL content. © 1994 John Wiley & Sons, Inc.     

Towards understanding the increase in strength of thermotropic polyesters with heat treatment

Thermotropic copolyester fibers of oxynaphthoate and oxybenzoate have been subjected to conditions that promote solid-state polymerization as well as annealing. The annealing process causes the crystals to perfect with a simultaneous increase in heat of fusion and melting temperature. Solid-state polymerization, a reaction rate-controlled process, causes the polymer viscosity average molecular weight to increase by chain extension from about 14,000 g/mole to more than 87,000 g/mole with a simultaneous impressive increase in tenacity from about 10 g/d (1.2 GPa) to almost 30 g/d (3.7 GPa). To understand the changes in mechanical properties, we have modeled the fiber structure as short rod-like molecules poorly bonded to a continuous matrix of parallel molecules. Lengthening of the reinforcing molecules facilitates better transfer of load from matrix to molecules, resulting in higher tenacity fibers. © 1994 John Wiley & Sons, Inc.     

On interrelation between the internal pressure and the cohesion energy density

The question about the definition of the “internal pressure” concept is being discussed. It is shown that the previously found differential relation between the cohesion energy density and the internal pressure is one of the examples of an absolutely general interrelation between definitely connected differential functions. It is ascertained that the ratio (the internal pressure divided by the cohesion energy density) is a structuresensitive parameter inherent to the calorific (thermal) equation of a liquid state.     

Efficacy of the accent method of voice therapy

The management of voice disorders may follow one of four approaches: surgical, pharmacological, technical aid, and/or voice therapy. The latter approach offers a wide variety of techniques, each based on certain theoretical beliefs. One of these techniques is the Smith Accent Method. The principles and goals of the Accent Method are presented. The results of its application are discussed. This technique proved effective for cases of functional voice disorders, vocal nodules, and some degrees of vocal fold paralysis.     

硼中子俘获治疗的蒙特卡罗方法模拟

用通用蒙特卡罗程序MCNP模拟了粒子在人脑中的输运过程. 吸收剂量率主要来自以下四个反应:¹⁰B(n,α)⁷Li,¹⁴N(n,p)¹⁴C,¹H(n,γ)²D,快中子弹性散射反应.对肿瘤区的贡献主要来自硼中子吸收反应.结果表明,超热中子比热中子适合于深肿瘤的治疗,而热中子对浅肿瘤的治疗有优越性,比如皮肤癌.同确定论方法的结果相比,蒙特卡罗方法不失为一种模拟中子俘获治疗的好工具.     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Studies on thermal and morphological properties of 1,1-bis(3-methyl-4-cyanatophenyl)cyclohexane-epoxy-bismaleimide matrices

A new cyanate ester monomer, 1,1-bis(3-methyl-4-cyanatophenyl)cyclohexane has been synthesized and characterized. Epoxy modified with 4, 8 and 12% (by weight) of cyanate ester were made using epoxy resin and 1,1-bis(3-methyl-4-cyanatophenyl)cyclohexane and cured by using diaminodiphenylmethane. The cyanate ester modified epoxy matrix systems were further modified with 4, 8 and 12% (by weight) of bismaleimide (N,N′-bismaleimido-4,4′-diphenylmethane). The formation of oxazolidinone and isocyanurate during cure reaction of epoxy and cyanate ester blend was confirmed by IR spectral studies. Bismaleimide-cyanate ester-epoxy matrices were characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and heat deflection temperature (HDT) analysis. Thermal studies indicate that the introduction of cyanate ester into epoxy resin improves the thermal degradation studies at the expense of glass transition temperature. Whereas the incorporation of bismaleimide into epoxy resin enhances the thermal properties according to its percentage content. However, the introduction of both cyanate ester and bismaleimide influences the thermal properties according to their percentage content. DSC thermogram of cyanate ester modified epoxy and bismaleimide modified epoxy show unimodel reaction exotherms. The thermal degradation temperature and heat distortion temperature of the cured bismaleimide modified epoxy and cyanate ester-epoxy systems increased with increasing bismaleimide content. The morphology of the bismaleimide modified epoxy and cyanate ester-epoxy systems were also studied by scanning electron microscopy. Copyright © 2003 John Wiley & Sons, Ltd.