定向倾斜枝晶生长规律及竞争行为的相场法研究

采用多相场模型对定向凝固过程中倾斜枝晶生长进行了研究, 模拟了单一取向枝晶列的演化规律及不同取向枝晶列汇聚生长竞争淘汰行为. 结果表明, 枝晶尖端过冷度随倾斜角度的增大而增大, 即相同条件下倾斜枝晶尖端位置总是低于非倾斜枝晶; 汇聚生长时择优取向枝晶总是阻挡非择优取向枝晶, 但在抽拉速度较低时, 由于溶质扩散场的相互重叠, 晶界处择优取向枝晶的生长受到相邻非择优枝晶的影响而延缓, 这可能导致非择优取向枝晶淘汰择优取向枝晶.     

Growth of large La2−xSrxCuO4 single crystals using tilting-mirror-type infrared heating image furnace

Large single crystals of La_2−xSr_xCuO₄ (LSCO) high-T_c superconductors were grown by the infrared heating floating zone (IR-FZ) method using a tilting-mirror-type image furnace. The maximum diameter of the LSCO crystals increased to 10 mm in the tilting-mirror-type image furnace from 6 mm in the conventional image furnace. CuO rich feeds were required for the crystal growth using the tilting-mirror-type image furnace to compensate for the lack of CuO caused by the significant evaporation of CuO during the growth. The evaporation of CuO was affected by the tilting angle of the mirrors of the image furnace and by feed diameter. The optimized growth conditions were as follows: mirror tilting angle, 20°; feed diameter, 10 mm∅; and feed composition 50.7 mol% CuO.     

Damage and fracture prediction of plastic-bonded explosive by digital image correlation processing

By digital correlation processing of Scanning electronic microscopy (SEM) images, the paper presents the deformation and damage analysis of an energetic material—the plastic-bonded explosive (PBX) on mesoscopic scale. The analysis is made by observing the deformation field resulted from the digital image correlation (DIC) processing of the images corresponding to the loading steps and comparing with the surface profiles of the composite material so as to visualize the matter damage near a preset crack. The results show that the local deformation disturbance can reveal the material damage even happened underneath the specimen surface. The strain distribution in the front of the preset crack, can be used to predict the propagating route of the microcrack initiated from the tip of the pre-crack, which is related to the splitting fracture of the granular-based composite under compressive loading.     

Competition Between Self-birth and Catalyzed Death in Aggregation Growth with Catalysis Injection

We propose two irreversible aggregation growth models of aggregates of two distinct species (A and B) to study the interactions between virus aggregates and medicine efficacy aggregates in the virus-medicine cooperative evolution system. The A-species aggregates evolve driven by self monomer birth andB-species aggregate-catalyzed monomer death in model I and by self birth, catalyzed death, and self monomer exchange reactions in model II, while the catalyst B-species aggregates are assumed to be injected into the system sustainedly or at a periodic time-dependent rate. The kinetic behaviors of the A-species aggregates are investigated by the rate equation approach based on the mean-field theory with the self birth rate kernel I_A(K)=Ik, catalyzed death rate kernel J_AB(k)=Jk and self exchange rate kernel K_A(k,l)=Kkl. The kinetic behaviors of the A-species aggregates are mainly dominated by the competition between the two effects of the self birth (with the effective rate I) and the catalyzed death (with the effective rate JB₀), while the effects of the self exchanges of the A-species aggregates which appear in an effectiverate KA₀ play important roles in the cases of I>JB₀ and I=JB₀. The evolution behaviors of the total mass M^A(t)₁ and the total aggregate number M^A(t)₀ are obtained, and the aggregate size distribution a_k(t) of species A is found toapproach a generalized scaling form in the case of I ≧ JB₀ and a special modified scaling form in the case of I0. The periodical evolution of the B-monomers concentration plays an exponential form of the periodic modulation.     

Stochastic resonance induced by a multiplicative periodic signal in a logistic growth model with correlated noises

The stochastic resonance (SR) phenomenon induced by a multiplicative periodic signal in a logistic growth model with correlated noises is studied by using the theory of signal-to-noise ratio (SNR) in the adiabatic limit. The expressions of the SNR are obtained. The effects of multiplicative noise intensity α and additive noise intensity D, and correlated intensity λ on the SNR are discussed respectively. It is found that the existence of a maximum in the SNR is the identifying characteristic of the SR phenomena. In comparison with the SR induced by additive periodic signal, some new features are found: (1) When SNR as a function of λ for fixed ratio of α and D, the varying of α can induce a stochastic multi-resonance, and can induce a re-entrant transition of the peaks in SNR vs λ; (2) There exhibits a doubly critical phenomenon for SNR vs D and λ, i.e., the increasing of D (or λ) can induce the critical phenomenon for SNR with respect to λ (or D); (3) The doubly stochastic resonance effect appears when α and D are simultaneously varying in SNR, i.e., the increment of one noise intensity can help the SR on another noise intensity come forth.      

Simulations of Co‐GISAXS during kinetic roughening of growth surfaces

The recent development of surface growth studies using X‐ray photon correlation spectroscopy in a grazing‐incidence small‐angle X‐ray scattering (Co‐GISAXS) geometry enables the investigation of dynamical processes during kinetic roughening in greater detail than was previously possible. In order to investigate the Co‐GISAXS behavior expected from existing growth models, calculations and (2+1)‐dimension simulations of linear Kuramoto–Sivashinsky and non‐linear Kardar–Parisi–Zhang surface growth equations are presented which analyze the temporal correlation functions of the height–height structure factor. Calculations of the GISAXS intensity auto‐correlation functions are also performed within the Born/distorted‐wave Born approximation for comparison with the scaling behavior of the height–height structure factor and its correlation functions.     

椭圆偏振技术研究VHF-PECVD高速沉积微晶硅薄膜的异常标度行为

采用VHF-PECVD技术高速沉积了不同生长阶段的微晶硅薄膜,通过椭圆偏振技术研究了生长过程中微晶硅薄膜表面粗糙度的演化.实验结果表明,沉积气压P_g=300 Pa时,β=0.81,其超出标度理论中β最大值为0.5范围,出现异常标度行为.这表明微晶硅薄膜高速生长中还存在其他粗糙化增加的因素,此粗糙化增加的因素与阴影作用有关. 关键词： 微晶硅薄膜 椭偏光谱法 生长机制 表面粗糙度     

Li and K NMR relaxation study of a LiKSO4 single crystal

The ⁷Li and ³⁹K NMR relaxations in a LiKSO₄ single crystal grown by the slow evaporation method were investigated by employing a pulse NMR spectrometer. From the experimental data, the quadrupole coupling constant and asymmetry parameter were determined at the temperatures of 180 and 300 K. The relaxation processes of ⁷Li and ³⁹K were studied for the LiKSO₄ crystal, and the relaxation times for the ⁷Li and ³⁹K nuclei exhibit remarkable changes near T_c2 (=190 K). The activation energies for ⁷Li and ³⁹K were determined in phases I and III. The large change in the activation energy at 190 K indicates that the Li and K ions are significantly affected during this transition. The correlation time of the ⁷Li calculated from the spin-lattice relaxation time and quadrupole parameters was larger than that of the ³⁹K calculated using the same method. The reason for this is that the Li ion undergoes molecular motion as in the LiO₄ groups.     

Microwave-assisted synthesis of flower-like and leaf-like CuO nanostructures via room-temperature ionic liquids

Flower-like and leaf-like cupric oxide (CuO) single-crystal nanostructures have been successfully synthesized using ionic liquid 1-octyl-3-methylimidazolium trifluoroacetate ([Omim]TA) under the microwave-assisted approach. By controlling the concentration of [Omim]TA and reaction temperature, shape transformation of CuO nanostructures could be achieved in a short period of time. The results indicate that ionic liquid [Omim]TA plays an important role in the formation of different morphologies of CuO crystals. The crystal structure and morphology of products were characterized by X-ray powder diffraction (XRD), infrared spectrum (IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), and selected-area electron diffraction (SAED). A possible mechanism for CuO nanostructure was proposed. In addition, UV-vis spectroscopy was employed to estimate the band gap energies of CuO crystals.     

A study of the evaporative deposition process: Pipes and truncated transport dynamics

We consider contact line deposition of an evaporating thin drop. Following Dupont’s proposal (unpublished), we focus on transport dynamics truncated by a maximal concentration as the single deposition mechanism. The truncated transport process, formalized as the “pipe model”, admits a characteristic shock front that has a robust functional form and depends only on local hydrodynamic properties. By applying the pipe model, we solve the density profile in different asymptotic regimes. In particular, we find that near the contact line the density profile follows a scaling law that is proportional to the square root of the concentration ratio defined as the initial solute volume concentration divided by the maximal concentration. The maximal deposit density occurs at about 2/3 of the total drying time for uniform evaporation and 1/2 for diffusion-controlled evaporation. Away from the contact line, areal density decays exponentially with the radial distance to the power of -3 for the uniform evaporation and -7 for the diffusion-controlled evaporation.