超音速等离子体炬的磁流体动力学数值研究

针对设计的喉径2mm、工作电流为100A的拉瓦尔喷嘴,在二维轴对称模型的基础上,对超音速等离子体炬中的流动及其外部射流进行了数值模拟。通过在阳极喷嘴内部采用基于磁矢量势的磁流体动力学模型,避免了对磁感应强度的复杂积分计算,得到了喷嘴内部多场耦合的结果及外部射流的流动状态,分析了喷嘴内部电磁场对等离子体的加速作用及射流发展过程。结果显示,等离子体经历了亚音速→跨音速→超音速的发展过程,最终获得2.3 Ma的超音速射流。研究结果为超音速等离子体炬的工业应用提供了理论基础。     

��������ѹǿ��Line-tiedŤ�����ȶ��������ʺͱ���������Ӱ��

应用半解析方法,研究了直圆柱位形下等离子体压强P0分别为P0=0、P0=常数和P0=f(r)时Line-tied扭曲不稳定性的增长率和二维径向本征函数的演化规律。结果表明,P0=0和P0=常数时的轴向波数k的范围相同,但P0=常数时的增长率比P0=0时的小。P0=f(r)时的轴向波数k的范围和增长率则都比P0=0时的大,同时磁流体的速度变化也较大。因此,P0=f(r)更接近实际的物理模型(例如日冕的喷射问题)。     

Thermophysical effects of carbon nanotubes on MHD flow over a stretching surface

This article is intended for investigating the effects of magnetohydrodynamics (MHD) and volume fraction of carbon nanotubes (CNTs) on the flow and heat transfer in two lateral directions over a stretching sheet. For this purpose, three types of base fluids specifically water, ethylene glycol and engine oil with single and multi-walled carbon nanotubes are used in the analysis. The convective boundary condition in the presence of CNTs is presented first time and not been explored so far. The transformed nonlinear differential equations are solved by the Runge–Kutta–Fehlberg method with a shooting technique. The dimensionless velocity and shear stress are obtained in both directions. The dimensionless heat transfer is determined on the surface. Three different models of thermal conductivity are comparable for both CNTs and it is found that the Xue [1] model gives the best approach to guess the superb thermal conductivity in comparison with the Maxwell [2] and Hamilton and Crosser [3] models. And finally, another finding suggests the engine oil provides the highest skin friction and heat transfer rates.     

A 3D mesh deformation technique for irregular in‐flight ice accretion

Aircraft holding around busy airports may be requested to sustain as much as 45 min of icing before landing or being diverted to another airport. In this paper, a three‐dimensional mesh deformation scheme, based on a structural frame analogy, is proposed for the numerical simulation of ice accretion during extended exposure to adverse weather conditions. The goal is to provide an approach that is robust and efficient enough to delay or altogether avoid re‐meshing while preserving (enforcing) nearly orthogonal elements at the highly distorted ice surface. Robustness is achieved by suitably modifying the axial and torsional stiffness components of the frame elements in order to handle large and irregular grid displacements typical of in‐flight icing. Computational efficiency is obtained by applying the mesh displacement to an automatically selected small subset of the entire computational domain. The methodology is validated first in the case of deformations typical of fluid‐structure interaction problems, including wing bending, a helicopter rotor in forward flight, and the twisting of a high‐lift wing configuration. The approach is then assessed for aero‐icing on two swept wings and compared against experimental measurements where available. Copyright © 2015 John Wiley & Sons, Ltd.     

Unsteady MHD free convective heat and mass transfer from a vertical porous plate with Hall current,thermal radiation and chemical reaction effects

An analysis is presented to investigate the effects of chemical reaction, thermal radiation and heat generation or absorption on unsteady free convective heat and mass transfer along an infinite vertical porous plate in the presence of a transverse magnetic field and Hall current. The governing partial differential equations are formulated and transformed by using a similarity transformation into a system of ordinary differential equations. The resulting equations are solved numerically using a fourth‐order Runge–Kutta scheme along with the shooting method. The Rosseland approximation is used to describe the radiative heat flux in the energy equation. Numerical results for the velocity, temperature and concentration distributions are shown graphically for different parametric values. The effects of parameters on the local friction coefficients, the Nusselt number and Sherwood numbers are depicted in tabulated form. Copyright © 2009 John Wiley & Sons, Ltd.     

Cyclic Designs with Block Size 4 and Related Optimal Optical Orthogonal Codes

We prove the existence of a cyclic (4p, 4, 1)-BIBD—and hence, equivalently, that of a cyclic (4, 1)-GDD of type 4 ^p —for any prime such that (p–1)/6 has a prime factor q not greater than 19. This was known only for q=2, i.e., for . In this case an explicit construction was given for . Here, such an explicit construction is also realized for .We also give a strong indication about the existence of a cyclic (4p 4, 1)-BIBD for any prime , p>7. The existence is guaranteed for p>(2q ³–3q ²+1)²+3q ² where q is the least prime factor of (p–1)/6.Finally, we prove, giving explicit constructions, the existence of a cyclic (4, 1)-GDD of type 6 ^p for any prime p>5 and the existence of a cyclic (4, 1)-GDD of type 8 ^p for any prime . The result on GDD's with group size 6 was already known but our proof is new and very easy.All the above results may be translated in terms of optimal optical orthogonal codes of weight four with =1.     

On a problem of Byrnes concerning polynomials with restricted coefficients, II

As in the earlier paper with this title, we consider a question of Byrnes concerning the minimal length of a polynomial with all coefficients in which has a zero of a given order at . In that paper we showed that for all and showed that the extremal polynomials for were those conjectured by Byrnes, but for that rather than . A polynomial with was exhibited for , but it was not shown there that this extremal was unique. Here we show that the extremal is unique. In the previous paper, we showed that is one of the 7 values or . Here we prove that without determining all extremal polynomials. We also make some progress toward determining . As in the previous paper, we use a combination of number theoretic ideas and combinatorial computation. The main point is that if is a primitive th root of unity where is a prime, then the condition that all coefficients of be in , together with the requirement that be divisible by puts severe restrictions on the possible values for the cyclotomic integer .

     

新型高功率径向强流速调管振荡器

 提出了一种新结构的高功率径向强流速调管振荡器,该器件利用折叠式同轴谐振腔的微波场与接近空间电荷限制电流的径向电子束强烈相互作用产生高功率微波。首先对这种器件的实现机理进行了初步的分析，提出了有间隙电压情况时的径向同轴间隙的空间电荷限制电流1维近似估计模型。分析表明：对于电子束直流接近但小于直流空间限制电流的径向速调管，当有调制间隙电压时，空间限制电流要小于无调制间隙电压情况下的直流空间限制电流，径向强流电子束电流接近和超过空间电荷限制电流时会出现强烈的调制。然后用PIC程序对其特性进行了粒子模拟，在二极管输入电压500 kV、电子束电流为30 kA条件下，最终得到了峰值功率6 GW、频率1.3 GHz的微波输出。     

Weight distributions of geometric Goppa codes

The in general hard problem of computing weight distributions of linear codes is considered for the special class of algebraic-geometric codes, defined by Goppa in the early eighties. Known results restrict to codes from elliptic curves. We obtain results for curves of higher genus by expressing the weight distributions in terms of -series. The results include general properties of weight distributions, a method to describe and compute weight distributions, and worked out examples for curves of genus two and three.

     

On the Characterization of Linear Uniquely Decodable Codes

A Uniquely Decodable (UD) Code is a code such that any vector of the ambient space has a unique closest codeword. In this paper we begin a study of the structure of UD codes and identify perfect subcodes. In particular we determine all linear UD codes of covering radius 2.