Size‐Mediated Recurring Spinel Sub‐nanodomains in Li‐ and Mn‐Rich Layered Cathode Materials

Li‐ and Mn‐rich layered oxides are among the most promising cathode materials for Li‐ion batteries with high theoretical energy density. Its practical application is, however, hampered by the capacity and voltage fade after long cycling. Herein, a finite difference method for near‐edge structure (FDMNES) code was combined with in situ X‐ray absorption spectroscopy (XAS) and transmission electron microscopy/electron energy loss spectroscopy (TEM/EELS) to investigate the evolution of transition metals (TMs) in fresh and heavily cycled electrodes. Theoretical modeling reveals a recurring partially reversible LiMn₂O₄‐like sub‐nanodomain formation/dissolution process during each charge/discharge, which accumulates gradually and accounts for the Mn phase transition. From the modeling of spectra and maps of the valence state over large regions of the cathodes, it was found that the phase change is size‐dependent. After prolonged cycling, the TMs displayed different levels of inactivity.     

A technique for production of nanocrystalline cellulose with a narrow size distribution

Nanocrystalline cellulose (NCC) was prepared by sulfuric acid hydrolysis of microcrystalline cellulose. A differential centrifugation technique was studied to obtain NCC whiskers with a narrow size distribution. It was shown that the volume of NCC in different fractions had an inverse relationship with relative centrifugal force (RCF). The length of NCC whiskers was also fractionized by differential RCF. The aspect ratio of NCC in different fractions had a relatively narrow range. This technique provides an easy way of producing NCC whiskers with a narrow size distribution.     

悬浮床加氢裂化水溶性催化剂的筛选与表征

催化加氢作用, 当金属组分A和组分B浓度分别为 15 μg/g ～ 25 μg/g 和 1100 μg/g～1300 μg/g时催化剂具有较好的催化加氢活性。两元水溶性催化剂硫化后的XPS、XRD和TEM分析结果表明：活性组分经硫化反应后生成了金属硫化物,但组分A硫化率不足50％;组分B易硫化结晶,其晶粒成为组分A的硫化物晶粒或颗粒分散的“载体”,使组分A的硫化物具有较高的分散度,提高了催化剂的加氢活性;A-B双金属水溶性催化剂经硫化反应后所形成的颗粒尺寸在100 nm左右,说明两元金属催化剂在硫化结晶过程中确实存在相互分散和抑制晶粒增长的作用。     

Silver Nanostructures on Graphene Oxide as the Substrate for Surface-Enhanced Raman Scattering (SERS)

Nanosized surface-enhanced Raman scattering (SERS) substrates fabricated by the controlled growth of metal nanostructures on water-dispersed two-dimensional nanomaterials can open a new avenue for SERS analysis of liquid samples in biological fields. In this work, regular and uniform Ag nanostructures were grown on the surface of graphene oxide (GO) through a microwave-assisted hydrothermal method. Polyamidoamine (PAMAM) dendrimers were assembled on the surface of GO to form GO/PAMAM templates for growing Ag nanostructures, which are primarily comprised of Ag dimers and trimers. The prepared Ag/GO nanocomposites are highly dispersed and stable in aqueous solution and may be used as substrates for enhanced Raman detection of rhodamine 6?G (R6G) in aqueous solution. This special substrate provides high-performance SERS and suppresses R6G fluorescence in aqueous solution and is promising as a nanosized material for the enhanced Raman detection of liquid samples in biological diagnostics.     

In situ real-time study buckling behavior of boron nitride nanotubes with axial compression by TEM

The real time analysis structure evolution of BNNT with compression showed that the formation of V-shape in the post-buckling before BNNT fracture was reversible.     

Choline chloride – Urea deep eutectic solvent an efficient media for the preparation of metal nanoparticles

Metal nanoparticles are nanosized structures that have different potential applications in biological, chemical, medical, and agricultural fields because of their exotic characteristics. Their size ranges from 1 to 100 nm. Metal nanoparticles are either purer forms of metals (eg: Gold, Silver, Copper, Iron, etc.) or their compounds (eg: sulfides, hydroxides, oxides, etc.). Ionic liquids are generally used in the extraction of nanoparticles but they are challenging because of their indigent bio-degradability, bio-compatibility, and sustainability. So Deep Eutectic Solvent (DES) is reported as an alternative to ionic liquids in the formation of nanoparticles. The DESs are a complex of quaternary ammonium salts and hydrogen donors or metal salt. DESs contain higher non-symmetric ions which have lower lattice energy and hence they have a lower melting point. This research utilizes a novel DES (choline chloride – urea) as an effective solvent to produce mercuric sulfide (HgS), zirconium oxide (ZrO), manganese oxide (MnO), and copper oxide (CuO) nanoparticles. As a result, the production of these metal nanoparticles using Choline Chloride (C₅H₁₄ClNO) – Urea DES can be treated as a promising way in chemical manufacturing. The nanoparticles have been analyzed using Ultra Violet Spectroscopy, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FT-IR), X-Ray Diffraction (XRD) and Energy Dispersive X-Ray Analysis (EDAX).     

利用TEM对Si基片与MgO基片上生长的薄膜特性的研究

对生长在Si和MgO单晶基片上的不同厚度的单层NbN薄膜、双层薄膜AlN/NbN以及三层薄膜NbN/AlN/NbN应用透射电子显微镜(Transmission Electron Microscope,TEM)技术进行了分析研究,对这几种薄膜样品的微观结构、薄膜厚度以及各个边界的一些直观细节给出了较为清晰的图像。由透射电子显微镜的电子衍射图案计算了薄膜和单晶衬底的晶格常数,并与我们以前采用X射线衍射技术分析的结果进行了比较,结果有很好的吻合。     

Effect of material selection and background impurity on interface property and resulted CIP-GMR performance

In this paper, we investigated the effect of background base pressure, wafer-transferring time between process modules, and stack layer material selection on the current-in-plane giant magneto-resistive (CIP-GMR) interface properties and the resulted CIP-GMR performance. Experimental results showed that seed layer/AFM interface, AFM/pinned layer (PL) interface, pinned layer/Ru interface, and reference layer (RL)/Cu spacer interface are among the most critical ones for a CIP-GMR device. By reducing the background impurity level (water moisture and oxygen), optimizing the wafer process flow sequence, and careful stack-layer material selection, such critical interfaces in a CIP-GMR device can be preserved. Consequently, a much robust GMR performance control can be achieved.     

Tetramethylguanidinium‐polyallylamine (Tmg‐PA): A new class of nonviral vector for efficient gene transfection

Highly toxic polyallylamine (PA) was reacted with a varying amount of a novel linker, 6‐(N,N,N′,N′‐tetramethylguanidinium chloride) hexanoic acid (Tmg‐HA), to prepare a series of tetramethylguanidinium‐PA (Tmg‐PA) polymers, which were used as vectors for gene transfection. The extent of attachment of the linker, Tmg‐HA, to the PA backbone was determined by 2,4,6‐trinitrobenzene sulfonic acid assay. The modified polymers (Tmg‐PAs), when complexed with pDNA, exhibited good condensation ability. The nanoparticles, so formed, were characterized by their size and zeta potential and were subsequently evaluated for their toxicity and transfection ability on various mammalian cells, viz., HeLa, CHO, and HEK 293 cells. Mobility shift assay revealed that on increasing the percent substitution of Tmg‐HA onto PA (from Tmg‐PA1 to Tmg‐PA6), relatively higher amounts of modified polymers were required to retard the mobility of a fixed amount of DNA. Besides, Tmg‐PA polymers provided sufficient protection (ca. 84–88%) to bound DNA against nucleases and one of the formulations, Tmg‐PA2 (ca. 15% substitution) displayed the highest transfection efficiency outcompeting the commercial transfection reagent, Lipofectamine? with minimal cytotoxicity. More impressively, the transfection efficiency increased despite recording a decrease in the buffering capacity of the grafted polymers suggesting that buffering capacity is not the sole parameter in determining the gene delivery efficiency of a vector system. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Imidazole derivatives as the organic precursor of ZnO nano particle

N₁-Hydroxy-2,4,5-trisubstituted imidazoles were synthesized starting from 1,2-diketones. The crystal structure of 4,5-dimethyl-2-(3-nitrophenyl)-1H-imidazol-1-ol has been determined. An unusual intermolecular hydrogen bonding through the association of water molecule has been reported. These imidazole derivatives can be thought of as the organic precursor for the synthesis of zinc oxide nano particles.