Investigation of the Declared Value of Selenium in Food Supplements by HG-AFS

The method of hydride generation atomic fluorescence spectrometry (HG-AFS) was optimised for determination of selenium in food supplements. Due to the high and varied content of Cu, Mg and Zn in the samples, the standard addition method was found to be the most appropriate. The reliability of the method was checked by the independent method of radiochemical neutron activation analysis, and good agreement was found between the two methods. HG-AFS is simple and rapid for Se determination in food supplements based on minerals. Agreement between the selenium values found and declared was worse than 10% in 9 out of 13 supplements. Furthermore, 2 of the 14 supplements did not comply with the recommendations stated in the 27^th edition of the U.S. Pharmacopoeia, which states that minerals and vitamins in food supplements should be in the range of 90 and 200% of the declared value.     

（H2O）^＋n（n=1,2）的几何结构优化和振动光谱分析

采用Ｈａｒｔｒｅｅ－Ｆｏｃｋ和ＭＰ２方法在多种水平下优化了（Ｈ２Ｏ）＾＋ｎ（ｎ ＝１，２）的几何结构，并进行了振动光谱分析。结果表明：对（Ｈ２Ｏ）＾＋采用ＭＰ２／６－３１１＋＋Ｇ（ｄ，ｐ）可得出最满意的结论。     

焙烧富集分离－氢化物原子荧光法测定地质物料中痕量硒

本文研究了一种焙烧富集分离、氢化物－原子荧光法测定地质物料中痕量Ｓｅ的方法。系统地研究了Ｓｅ富集分离条件、考查了３０多种元素在焙烧前后对测定Ｓｅ的影响，在选定的最佳实验条件下，方法检出下限为０．０１μｇ／ｇ，线性范围为０．００１～０．３μｇ／ｍＬ。样品中Ｓｅ含量水平为０．０３６μｇ／ｇ和０．０８９μｇ／ｇ时的测量精度（ＲＳＤ）分别为１０％和５．８％。加标回收率为９７～９９％。采用本方法分析了２６个地球化学标准参考样中痕量硒，获得满意结果。     

Hydride generation atomic fluorescence spectrometric determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter using multivariate optimization

A highly sensitive and simple method, based on hydride generation and atomic fluorescence detection, has been developed for the determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter samples. Atmospheric particulates matter was collected on glass fiber filters using a medium volume sampler (PM1 particulate matter). Two-level factorial designs have been used to optimise the hydride generation atomic fluorescence spectrometry (HG-AFS) procedure. The effects of several parameters affecting the hydride generation efficiency (hydrochloric acid, sodium tetrahydroborate and potassium iodide concentrations and flow rates) have been evaluated using a Plackett-Burman experimental design. In addition, parameters affecting the hydride measurement (delay, analysis and memory times) have been also investigated. The significant parameters obtained (sodium tetrahydroborate concentration, sodium tetrahydroborate flow rate and analysis time for As; hydrochloric acid concentration and sodium tetrahydroborate flow rate for Se(IV); and sodium tetrahydroborate concentration and sodium tetrahydroborate flow rate for Te(IV)) have been optimized by using 2ⁿ + star central composite design. Hydrochloric acid concentration and sodium tetrahydroborate flow rate were the significant parameters obtained for Sb and Bi determination, respectively. Using a univariate approach these parameters were optimized. The accuracy of methods have been verified by using several certified reference materials: SRM 1648 (urban particulate matter) and SRM 1649a (urban dust). Detection limits in the range of 6 × 10⁻³ to 0.2 ng m⁻³ have been achieved. The developed methods were applied to several atmospheric particulate matter samples corresponding to A Coruña city (NW Spain).     

氢化物发生ICP-AES法测定药用植物中的痕量锗

本文应用氢化物发生ＩＣＰ－ＡＥＳ法研究了药用植物样品中痕量锗的测定方法，系统地研究了ＩＣＰ－ＡＥＳ仪器参数及氢化物发生条件对锗谱线信背比的影响，考察了１３种共存元素的干扰，并比较了植物样品的３种前处理方法。选定Ｈ３ＰＯ４－ＨＮＯ３－Ｈ２Ｏ２消化，在３ｍｏｌ／ＬＨ３ＰＯ４介质中，以１５ｇ／ＬＮａＢＨ４还原，测定药用植物样品中的锗，相对标准偏差≤２．９％，回收率为９４％～１０３％。方法检出限达０．１３μｇ／Ｌ。     

碱性体系在线氢化物发生—原子荧光光谱法测定痕量铋

提出了一种碱性体系在线氢化物发生－原子荧光光谱法测定痕量铋的分析方法。设计了在线氢化物发生系统流路及操作程序，研究了碱性体系氢化物发生的各项最佳条件。方法操作简便快速，能有效地消除过渡元素的严重化学干扰。应用于黄铜标样中痕量铋的直接测定，获得满意结果。     

Second‐harmonic response of a series of chiral polyesters: A joint experimental and theoretical study

A series of polyesters with π‐conjugated donor–acceptor segments was synthesized by the condensation of azobenzene‐4,4′‐dicarbonylchloride with 1,4:3,6‐dianhydro‐D‐sorbitol ([α] = + 42.5°) and biphenolic chromophores, bis(4‐hydroxyphenylazo)‐2,2′‐dinitrodiphenylmethane and bis(4‐hydroxyphenylazo)‐2,2′‐dinitrodiphenylsulfone. The polymers were characterized by spectral methods (IR, ultraviolet–visible, and NMR), thermal methods (thermogravimetry and differential scanning calorimetry), wide‐angle X‐ray scattering, and polarimetry. The polymers containing isosorbide units were optically active and crystalline. They exhibited glass‐transition temperature values between 100 and 160 °C and were stable up to 400 °C. The second‐harmonic generation (SHG) efficiency of the polymers was experimentally verified by a powder‐reflection technique with 2‐methyl‐4‐nitroaniline as a reference. The SHG efficiencies of the polymers were compared to those of the chromophores and explained as a function of the percentage of chiral composition. The hyperpolarizability β values were also determined by a two‐level model solvatochromic method and computational methods. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2868–2877, 2002     

氢化物发生石墨炉原子吸收光谱法直接测定高温镍基合金中的硒

在６ｍｏｌ／Ｌ盐酸介质和０．１％ＫＢＨ４条件下，不但能有效地发生硒的氢化物，而且５ｍｇ／ｍｌＮｉ和３ｍｇ／ｍｌＦｅ都不干扰硒的测定。利用涂钯石墨；管作为氢化物的原子化器，直接测定了高温镍基合金中的硒，特征质量为４０ｐｇ，相对标准偏差在６．１％以内，回收率在９７％－１１０％之间。     

Separation and sensitive determination of arsenic species (As/As) using the yeast-immobilized column and hydride generation in ICP–AES

Inorganic arsenic was separated using the yeast-immobilized column. Saccharomyces cerevisiae was covalently bonded unto the controlled pore glass, which showed selective preconcentration of As⁵⁺ over As³⁺. The effluent was directly connected to hydride generation (HG) to increase sensitivity. The optimum pH condition for the retainment of arsenic at the column was 7. As⁵⁺ and As³⁺ were completely separated in a few minutes with the flow rate of 1.5 ml min⁻¹. Three molars of nitric acid was adequate both for the elution of As⁵⁺ and hydride generation. The accuracy of the technique was tested with NIST SRMs. Quantitative analysis of arsenic species for herbicide, pesticide, and cigarette were performed, and the results showed good agreements with the suggested values. Yeast-immobilized column-HG-ICP showed a promising future for the arsenic speciation study.     

Synthesis and Structure of the New Ammonium Indium Phosphate (NH4)In(OH)PO4

A new ammonium indium phosphate (NH₄)In(OH)PO₄ was prepared by hydrothermal reaction in the In₂O₃-NH₄H₂PO₄-NH₃/OH system (T=200°C, autogenous pressure, 7 days). The formula (NH₄)In(OH)PO₄ was determined on the basis of chemical and thermal analysis (TG/DSC), X-ray powder diffraction and IR-spectroscopy. (NH₄)In(OH)PO₄ crystallizes in the tetragonal system with space group P4₃2₁2 (No. 96); a=9.4232(1) Å, c=11.1766(1) Å, V=992.45(2) ų; Z=8. The crystal structure was refined by the Rietveld method (R_w=6.35%, R_p=5.10%). The second-harmonic generation study confirmed that structure of (NH₄)In(OH)PO₄ does not have a center of symmetry. The cis-InO₄(OH)₂ octahedra form helical chains, parallel to the c-axis. The In-O-In bonds are nearly equidistant. The chains are interconnected by phosphate tetrahedra and create tunnels containing the NH₄⁺ ions along the c-axis. (NH₄)In(OH)PO₄ is isostructural with RbIn(OH)PO₄.