导弹目标单、双基地雷达散射截面对比分析

目标单、双基地雷达散射截面(RCS)反映了目标是否容易被单、双基地雷达检测到。目前缺乏单、双基地RCS对比的量化指标。首先定义了双基地RCS相对于单基地RCS的RCS增强因子和RCS增强率,然后应用该定义统计分析了某隐身目标和非隐身目标双基地RCS计算结果。结果显示：对隐身目标,RCS增强因子大,RCS增强率高,对于非隐身目标,其RCS增强因子显著下降,RCS增强率不高。结合指标含义,应用双基地RCS有助于隐身目标检测,而对非隐身目标效果并不明显,这与雷达界认识相一致。这也说明,应用上述两个指标进行单、双基地RCS对比分析是有效的。此外根据隐身目标在较窄双基地角范围内的双基地RCS分析结果,应用双基地角20°~40°范围内的双基地RCS即可提高对隐身目标的检测效果。     

Neutron beam optimization based on a ^7Li（p,n）^7Be reaction for treatment of deep-seated brain tumors by BNCT

Neutron beam optimization for accelerator-based Boron Neutron Capture Therapy（BNCT） is investigated using a ^7Li（p,n）^7Be reaction. Design and optimization have been carried out for the target, cooling system,moderator, filter, reflector, and collimator to achieve a high flux of epithermal neutron and satisfy the IAEA criteria.Also, the performance of the designed beam in tissue is assessed by using a simulated Snyder head phantom. The results show that the optimization of the collimator and reflector is critical to finding the best neutron beam based on the ^7Li（p,n）^7Be reaction. Our designed beam has 2.49×109n/cm^2 s epithermal neutron flux and is suitable for BNCT of deep-seated brain tumors.     

Self-regulated Ni cluster formation on the TiO2(1 1 0) terrace studied using scanning tunneling microscopy

We have studied the growth mode and morphology of Ni clusters on a TiO₂(1 1 0) surface with a wide terrace using scanning tunneling microscopy (STM) at a low coverage (less than 3 atoms nm⁻²). The Ni clusters are formed on the terrace at the low coverage of 0.2 atoms nm⁻². Their average dimensions are constant in three directions up to 1 atoms nm⁻². The Ni clusters have an oval shape with average sizes of 1.8 nm (along [0 0 1]) × 1.4 nm (along (in the [1 1 0] directions). Above the coverage of 1.0 atoms nm⁻², an increase in the cluster height occurs, retaining an almost constant lateral size. It is proposed that the interaction of the Ni cluster and the support surface regulates the Ni cluster size.     

The effects of rain clutter on millimeter radar performance

The effects of rain clutter on millimeter radar performance are investigated at 35, 94 and 140GHz frequencies, including rain attenuation, radar reflectivity, maximum radar range and equivalent target cross section.     

基于ARM处理器的运动目标检测与跟踪系统

运动目标的检测及跟踪技术广泛应用于军事与民用领域。传统基于PC的目标跟踪系统不能满足对体积、功耗及便携性的需求,基于ARM处理器S3C2440A和嵌入式Linux操作系统构建了一个比较完整、实用的目标跟踪系统。该系统利用摄像头采集运动目标图像,处理器进行数字图像处理,LCD显示跟踪目标。阐述了实现原理及图像获取、目标检测、图像分割和目标跟踪算法程序流程。通过实际测试,该系统能满足对低速运动目标的检测、识别和跟踪,且具有较好的实时性和稳定性。     

一种基于图像融合的运动目标快速检测算法

提出了一种新的运动目标检测方法,这种方法可以有效的提取目标轮廓。应用一种图像差分技术得到运动目标的初始轮廓线。使用了动态轮廓线使其收敛到目标轮廓。提出了一种新的目标轮廓特征级融合方法,求解两类模式图像的收敛动态轮廓线控制点向量差的范数平方极小化。这种方法不需要图像配准降低了融合的计算复杂度,有效提高了可见光图像中目标轮廓提取的精度。对比检测实验证实了算法的有效性。设计了一种基于Newmark方法的动态轮廓线快速迭代算法,将该方法和方法作了比较,对比实验表明这种方法的时间复杂度降低了22%。     

HL-2A装置LHCD天线波谱测量与数值计算

用网络分析仪对HL-2A装置LHCD天线阵列子波导间的相位差,子波导间的相对功率和各主波导的电压驻波比等参数进行了测量。用测量值代入程序计算得到的波谱与理论计算的结果进行比较,表明天线发射的波谱与数值计算基本一致,能满足将要在HL-2A进行的LHCD实验。     

X-ray metrology for advanced silicon processes

X-ray reflectivity (XRR), X-ray fluorescence (XRF) and small angle X-ray scattering (SAXS) techniques are used to the monitoring of Cu/porous low κ processes, which are developed for the next generation (≤65 nm) integrated circuits. Sensitivity of XRR and XRF is sufficient to detect drifts of the copper barrier layer, copper seed layer and Cu CMP (chemical-mechanical polishing) processes. Their metrology key parameters comply with production requirements. SAXS allows determining the pore structure of low κ films: average pore size and pore size distribution.     

利用偏振度研究混合目标的混合比

提出一种利用偏振度研究混合目标混合比的新方法。通过建立混合目标模型将混合目标散射光的偏振度与混合目标的混合比建立直接的关系,在理论上得到了混合目标混合比分别与混合目标偏振度和归一化偏振度之间的数值关系,并且进一步给出了混合目标混合比由归一化偏振度的反演结果,为研究混合目标提供了新的思路与方法,对偏振度探测混合目标的实验以及工程应用都有重要的理论意义。     

双硬度靶对球形弹丸的防护性能

以钢/铝双硬度爆炸焊接复合靶为研究对象,采用系列弹道实验和数值模拟方法,研究了其在球形弹丸垂直侵彻作用下的抗侵彻性能。侵彻实验利用直径为14.5mm的滑膛枪发射直径为6mm的钢质球形弹丸;采用LS-DYNA3D非线性有限元程序和有限元-光滑粒子流体动力学(FE-SPH)耦合法,进行数值模拟。基于实验和数值模拟结果,分析了不同靶板的毁伤机理和破坏模式,以及靶板厚度、强度等因素对复合靶抗侵彻性能的影响。结果表明:在球形弹丸的垂直侵彻作用下,钢面板发生剪切冲塞破坏,铝背板发生延性扩孔破坏;对于双层靶而言,钢面板与铝背板的厚度比约为2/3时,复合靶的抗侵彻性能最差;数值计算结果与实验结果吻合良好,表明FE-SPH耦合算法可较好地预测双层复合靶板的抗侵彻性能。