湍流大气中聚焦平台光束焦移及光斑尺度

通过理论分析和数值模拟,对聚焦平台光束大气传输的焦移问题进行了研究。聚焦平台光束在湍流大气中传输时,湍流将导致光束的束腰向发射点移动,且湍流越强移动的幅度越大;大气湍流强度相同时,聚焦平台光束发射口径越小,其束腰移动的幅度越大。另外,通过调节发射系统的焦距,使聚焦平台光束的束腰正好位于接收探测器处时,接收探测器上的激光功率密度并非最大,只有当发射系统的焦距等于激光的传输距离时,接收探测器上的激光功率密度才会最大。     

啁啾堆积脉冲传输过程中的小尺度自聚焦效应

研究了啁啾堆积脉冲的时间精细结构与子脉冲带宽、相位、啁啾量等因素的关系。结果表明:随着子脉冲带宽的微小变化,啁啾堆积脉冲的峰值功率为相同输出能力窄带脉冲功率的1.5~3.0倍;当子脉冲间存在着随机相位扰动时,啁啾堆积的峰值功率约为相同输出能力窄带脉冲功率的3倍。建立了啁啾堆积脉冲的时空非线性传输放大模型,模拟得到堆积脉冲传输过程中的非线性增长因子,并与相同能量的窄带脉冲进行了比较,揭示了啁啾堆积脉冲在高功率激光装置中的传输放大过程中出现的一些新现象以及可能导致的后果。     

Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach

The aim of this study was to find a satisfactory method to characterize the fatigue crack growth behavior of non-reinforced, semi-crystalline thermoplastic polymers using linear elastic fracture mechanics (LEFM). For this, crack growth curves (crack length versus cycle number) as well as crack growth kinetics curves (crack growth rate da/dN versus amplitude stress intensity factor ΔK) had to be generated. As methods suggested by ISO 15850 and ASTM E 647-11 failed to provide satisfactory results for the crack growth curves, a more advanced method was searched for and finally found in the literature. Regarding the crack growth kinetics curve, the idea of the calculation was based on methods recommended in ISO 15850 and ASTM E 647-11. However, these methods had to be considerably modified and improved in order to get accurate results with little scatter. The whole methodology was developed and verified with fatigue crack growth tests on two semi-crystalline thermoplastics (polyoxymethylene POM and polyetheretherketone PEEK).     

Reprint of : Connection between wave transport through disordered 1D waveguides and energy density inside the sample: A maximum-entropy approach

We study the average energy – or particle – density of waves inside disordered 1D multiply-scattering media. We extend the transfer-matrix technique that was used in the past for the calculation of the intensity beyond the sample to study the intensity in the interior of the sample by considering the transfer matrices of the two segments that form the entire waveguide. The statistical properties of the two disordered segments are found using a maximum-entropy ansatz subject to appropriate constraints. The theoretical expressions are shown to be in excellent agreement with 1D transfer-matrix simulations.     

Wave propagation across a finite heterogeneous interphase modeled as an interface with material properties

Mechanical problems involving an interphase between two well-defined, and eventually different, materials are of interest. The aim of this paper is to present a simplified model that, for low frequency regime, is appropriate for this situation: an interface model with elastic and inertial properties. We present, together with the equations of motion, an identification procedure that is valid for any mass density profile along the thickness of the interphase. For evaluating the accuracy of the model, computations of the reflection coefficients in some relevant cases are shown. Besides, a finite element method is used as a benchmark for both the high and low frequency regimes. It is worth to be noted that the numerical test has been inspired by the problem of the interphase that is formed at the bone-implant boundary.     

Application of the transmission line matrix method for outdoor sound propagation modelling – Part 1: Model presentation and evaluation

The present paper deals with an original time-domain approach applied to outdoor sound propagation under meteorological effects. The transmission line matrix method, based on the Huygens’ principle, had already been validated over impedant grounds and complex topography. The presented formulation proposes to take into account meteorological effects (wind speed and temperature) through the relative sound speed. The necessary wavefront direction is determined through the calculation of the averaged intensity vector direction. A good agreement is found between simulations of both the transmission line matrix and parabolic equation methods. A relevant use of the method is shown in the framework of environmental acoustics and initial applications are proposed in Part 2.     

Infinite propagation speed of a weakly dissipative modified two-component Dullin–Gottwald–Holm system

We consider the infinite propagation speed of a weakly dissipative modified two-component Dullin–Gottwald–Holm (mDGH2) system. The infinite propagation speed is derived for the corresponding solution with compactly supported initial data that does not have compact support any longer in its lifespan.     

Modeling the Effect of Injection Molding Process Parameters on Warpage Using Neural Network Theory

A back propagation artificial neural network (BPANN) prediction model for warpage of injection-molded polypropylene was developed based on an orthogonal design method. The BPANN model was trained by the input and output data obtained from the moldflow software platform simulations. It is proved that the BPANN model can predict the warpage with reasonable accuracy. Utilizing the BPANN model, the effects of the process parameters, packing pressure (Pp), melt temperature (T_me), mold temperature (T_mo), packing time (t_p), cooling time (t_c), and fill pressure (p_f), on the warpage were investigated. The most important process parameter affecting the warpage was Pp, and the second most important was T_me. The rest of the process parameters, T_mo, t_p, t_c, and p_f, were found to be relatively less influential. Warpage increased with elevating T_mo. In contrast, an increase in Pp and T_me caused the warpage to decrease.     

On uniform propagation of chaos

In this paper we obtain a time-uniform propagation estimate for a system of interacting diffusion processes. Using a well defined metric function h , our result guarantees a time-uniform estimate for the convergence of a class of interacting stochastic differential equations towards their mean field limit, under conditions that ensure that the decay associated to the internal dynamics term dominates the interaction and noise terms. Our result should have diverse applications, particularly in neuroscience, and allows for models more elaborate than the one of Wilson and Cowan. In particular, the internal dynamics need not be that of linear decay.     

Poroelastic toughening in polymer gels: A theoretical and numerical study

We explore the Mode I fracture toughness of a polymer gel containing a semi-infinite, growing crack. First, an expression is derived for the energy release rate within the linearized, small-strain setting. This expression reveals a crack tip velocity-independent toughening that stems from the poroelastic nature of polymer gels. Then, we establish a poroelastic cohesive zone model that allows us to describe the micromechanics of fracture in gels by identifying the role of solvent pressure in promoting poroelastic toughening. We evaluate the enhancement in the effective fracture toughness through asymptotic analysis. We confirm our theoretical findings by means of numerical simulations concerning the case of a steadily propagating crack. In broad terms, our results explain the role of poroelasticity and of the processes occurring in the fracturing region in promoting toughening of polymer gels.