长链支化聚丙烯的非线性流变行为

通过大幅振荡剪切试验方法, 研究了长链支化聚丙烯的非线性流变学行为, 揭示了长链支化结构与非线性黏弹响应的关系. 利用傅里叶变换流变学方法得到试样的三次倍频相对振幅I_3/1与应变的标度关系, 用于界定线性聚丙烯和长链支化聚丙烯非线性流变行为的差异, 并定义了非线性系数来量度长链支化程度. 在高应变下, I_3/1与应变的变化关系可以进一步描述长链支化在非线性流场下的特性, 并得到了长链支化程度与其非线性响应之间的变化关系. 通过应力波的Lissajous曲线分解, 发现了环内和环间黏弹性的差异, 长链支化结构在大应变流场下的非线性黏弹性响应弱于线性结构, 支化程度越高非线性响应越弱.     

动态光散射研究盐对Gemini表面活性剂网状聚集体的影响

以动态光散射为主要手段研究了盐对羧酸盐Gemini表面活性剂O,O′-双(2-月桂酸钠)-p-二苯氧(记为C12φ2C12)自组织的影响.结果表明盐的加入很容易使C12φ2C12的网状聚集体转变为小(流体力学半径Rh,app约几纳米)和大(Rh,app100 nm)两种尺寸共存的聚集体,1,6-二苯基-1,3,5-己三烯(DPH)探针增溶实验证实小尺寸聚集体为核-壳结构的似球胶束,流变学测量说明大尺寸聚集体可能已经是线型的核-壳胶束.这种行为被归结为初始的网状聚集体不稳定,添加的反离子与C12φ2C12头基结合破坏了网状结构的亲水亲油平衡,促使了它们的转变.盐效应规律表现为MgCl2NaCl、Bu4NBrMe4NBrEt4NBrPr4NBr,这里Bu4NBr不遵循上述静电力顺序的原因是它提供了携带的丁基与C12φ2C12烷烃链疏水相互作用的附加力.     

Synthesis and Rheological Investigation ofModel Symmetric 3-Arm Star Polyethylene简

A variety of linear and 3-arm star polyethylene （PE） model polymers covering a wide range of molecular weight are synthesized by the living polymerization of butadiene and the subsequent hydrogenation. Several rheological parameters of these model linear and 3-arm star PE samples are analyzed for detecting the long chain branching （LCB） structure. It is found that the analyses based on zero shear viscosity, vGP plot and flow activation energy are very sensitive to the 3-arm star PEs. The information on the presence of LCB can be obtained with these methods even for low molecular weight samples, which can not be determined by GPC-MALLS. However the information about the LCB structure can not be obtained by the rheological methods alone.     

长碳链聚酰胺及其共聚物的拉伸诱导结晶

长碳链聚酰胺(LCPA)作为聚酰胺的特殊品种,较长的亚甲基链和极性酰胺基团使其兼具聚烯烃和聚酰胺的双重特性.在加工或使用过程中,拉伸诱导结晶现象对长碳链聚酰胺及其共聚物的强度和弹性行为具有重要影响,深入认识其在外场下的微观结构响应对该材料的设计及制备具有重要意义.围绕拉伸诱导结晶作用,该专论主要基于本团队2010年以来在长碳链聚酰胺及其共聚物的拉伸诱导结晶工作,并综述了国内外的相关研究,涉及拉伸诱导结晶现象、拉伸诱导结晶的影响因素、拉伸诱导结晶与力学性能的构效关系及拉伸诱导结晶的表征方法等方面.     

长程差分吸收光谱技术气体浓度反演误差的定量估计

长程差分吸收光谱法(LP-DOAS)是基于最小二乘原理来反演大气痕量气体浓度的。LP-DOAS能对痕量气体进行高灵敏的测量,但是还没有统计的方法定量确定LP-DOAS反演误差。痕量气体的吸收通常很弱,外来影响因素决定了检测限和测量精度,其被误当做真正的吸收,增加了没有统计特性的噪声到残差中,导致最小二乘拟合误差(err(LSQ))有一个明显的误估计。研究采用蒙特卡罗方法,通过残差的循环移位定量确定差分吸收光谱法反演气体浓度的误差。实验结果表明,蒙特卡罗方法可以定量估计差分吸收光谱法反演误差,误估计因子为1.13,而err(LSQ)为3.12。     

Energy transport in boundary driven quantum spin systems: One-way street phenomenon in models with long range interactions

We address the investigation of non trivial properties of the energy current in boundary driven XXZ quantum spin models. In specific, we focus on the occurrence of the one-way street phenomenon in asymmetrical chains, a phenomenon stronger than rectification, which establishes the existence of a unique way for the energy current in the absence of external magnetic field, that is, the magnitude and direction of the energy flow does not change as we invert the baths at the boundaries. For general target polarizations at the boundaries, we show that such a phenomenon holds in the presence of long range interactions, ingredient which increases the flow and the rectification in chains of classical oscillators, and so, of interest in the study of manipulation and control of the energy flow.     

用于测量亚硝酸的长光程吸收光谱仪的研制

This article has been retracted at the request of the authors.     

Detection of water in jet fuel using layer-by-layer thin film coated long period grating sensor

The quantitative measurement of jet fuel additives in the field is of interest to the Air Force. The “smart nozzle” project was designed as a state-of-the-art diagnostics package attached to a single-point refueling nozzle for assessing key fuel properties as the fuel is dispensed. The objective of the work was to show proof of concept that a layer-by-layer thin film and long period grating fibers could be used to detect the presence of water in jet fuel. The data for the nafion/PDMA film and a long period grating fiber is a combination capable of quantitative measurement of water in kerosene. The average response (spectral loss wavelength shift) to the kerosene sample ranged from −6.0 for 15 ppm to −126.5 for 60 ppm water. The average calculated value for the check standard was 21.71 and ranged from 21.25 to 22.00 with a true value of 22.5 ppm water. Potential interferences were observed and are judged to be insignificant in real samples.     

长余辉发光材料的紫外-可见反射光谱测定

用“湿法”制备了长余辉发光材料,原料通过水溶液液相分子水平上的均匀混合,利用金属硝酸盐和有机还原剂在较低的温度下发生氧化还原燃烧反应,一步快速生成产品。加热起燃温度低至500℃,反应时间短,所制得的产品成份均匀,晶粒小,外观呈蓬松状态,易研磨粉碎,粉体表观密度小。以紫外－可见分光光度计测定分析了所制备样品在蓄光前后的反射光谱特征并作了探讨。结果表明,除表观密度外,“显法”与“干法”制备的长余辉发光材料的主要性质相同,紫外－可见反射光谱可以准确描述长余辉发光材料的紫外－可见光谱性能特征。     

1.55-μm InGaAs/InGaAlAs MQW vertical-cavity surface-emitting lasers with InGaAlAs/InP distributed Bragg reflectors

High-performance InGaAs/InGaAlAs multiple-quantum-well vertical-cavity surface-emitting lasers (VCSELs) with InGaAlAs/InP distributed Bragg reflectors are proposed for operation at the wavelength of . The lasers have good heat diffusion characteristic, large index contrast in DBRs, and weak temperature sensitivity. They could be fabricated either by metal-organic chemical vapor deposition (MOCVD) or by molecular beam epitaxy (MBE) growth. The laser light-current characteristics indicate that a suitable reflectivity of the DBR on the light output side in a laser makes its output power increase greatly and its lasing threshold current reduce significantly, and that a small VCSEL could output the power around its maximum for the output mirror at the reflectivity varying in a broader range than a large VCSEL does.