NASICON-based H2 Sensor Using CoCrMnO4 Insensitive Reference Electrode and Buried Au Sensing Electrode

This work focuses on the H2 sensing performance of the sensor with buried Au sensing electrode and spi- nel-type oxide CoCrMnO4 insensitive reference electrode within sodium super ionic conductor（NASICON） film. The sensor showed the highest response to H2 gas on the insensitive material sintering at 800 ~C. Compared with those of the traditional structure device, the sensitivity and selectivity of the sensor using buried sensing electrode were greatly improved, giving a response of-177 mV in 9x10 5 g/L H2, which was about 3.5 times higher than that of sensors with traditional structure. Moreover, the AV value of the sensing device exhibited linear relationship to the logarithm of H2 concentration and the sensitivity（slope） was -135 mV/decade. A sensing mechanism related to the mixed potential was proposed for the present sensor.     

钙钛矿型混合离子电子导体在能源转化中应用的研究进展

钙钛矿型离子电子导体具有良好的传导氧离子和电子性能,使其在能源转化过程中具有较好的应用前景,已成为人们研究的热点。本文综述了钙钛矿型离子电子导体的主要制备方法,并着重介绍了其在化学循环燃烧、氧气的分离、制氢、太阳能电池方面的应用。钙钛矿型混合离子电子导体可作为一种复合催化剂,应用于甲烷选择性氧化工艺,为钙钛矿离子电子导体应用新途径,同时为甲烷高效催化转化利用提供了理论支持。     

Ce1-xGdxO2-x/2的溶胶-凝胶法合成及其性质

利用溶胶-凝胶法合成了Ce₁-xGdxO_2-x/2(x=0.1～0.6)系列固体电解质,系统地研究了其结构、热膨胀系数和导电性.XRD结果表明,160℃即完全形成立方萤石结构.由于溶胶-凝胶法合成的物质粒度均匀,颗粒小,故在较低温度(1300℃)时即可形成高致密样品,此温度明显低于传统的高温固相法烧结温度(1600～1650℃).高温X射线衍射测得Ce_0.8Gd_0.2O_1.9的热膨胀系数为8.125×10^-6K₁.阻抗谱表明,溶胶-凝胶法合成可减少或消除固体电解质的晶界电阻,600℃时Ce_0.8Gd_0.2O_1.9的电导率为5.26×10^-3S/cm,活化能E_a=0.82eV.     

高比能锂离子电池层状富锂正极材料改性策略研究进展

层状富锂材料具有超过250 mAh∙g⁻¹的高可逆比容量,被认为是下一代高比能锂离子电池最具商业化前景的正极材料之一。然而,层状富锂材料在实际应用之前仍需解决诸多挑战,如高电压氧释放、层状到岩盐相的结构变化、过渡金属离子迁移等结构劣化,并由此带来了较低的初始库伦效率、电压/容量的衰减以及循环寿命的不足。针对以上问题,进行层状富锂材料改性无疑是一种行之有效的方法。本综述全面介绍了层状富锂材料的结构、组分以及电化学性能,在此基础上对材料改性策略进行了系统阐述,详细介绍了体相掺杂、表面包覆、缺陷设计、离子交换和微结构调控等一系列改性策略的现状以及发展趋势,最终提出了高容量和长循环层状富锂材料和高比能锂离子电池的设计思路。     

以酚醛树脂为碳源原位合成富锂层状相/尖晶石/碳核壳结构正极材料及其电化学性能

通过酚醛树酯包覆和碳热反应在富锂正极材料表面原位构建碳和尖晶石双壳保护结构, 对这种核壳结构的正极材料进行了结构和形貌表征, 并研究了其电化学性能. 研究发现, 尖晶石相为材料提供了三维锂离子迁移通道, 碳包覆层显著提高了正极材料的电子电导率, 两种效应的共同作用极大降低了材料的电化学阻抗, 提升了材料的放电比容量, 这种多壳层结构正极材料还具有优异的倍率性能, 在5C倍率下放电比容量可达到135.1 mA·h/g.     

Recent advances in scanning electrochemical microscopic analysis and visualization on lithium-ion battery electrodes

Scanning electrochemical microscopy is a family of techniques that probes the local electrochemical surface environments with micrometer- and nanometer-scale space resolution and sub-picoampere chemical sensitivity. A recent growing trend uses these probes to investigate surface systems related to lithium-ion batteries, yielding a prodigious amount of new information. In this review, we give an overview of the recent progress on the scanning electrochemical microscopy and related techniques’ breakthroughs on lithium-ion battery electrodes research.     

Mesoporous carbon material as cathode for high performance lithium-ion capacitor

The mesoporous carbon material with large pore volume and high surface area by a simple situ MgO template method is synthesized, which is utilized as cathode to assemble a high performance lithium ion capacitor.     

合成温度对全梯度正极材料LiNi0.7Co0.15Mn0.15O2的结构和电化学性能影响

通过控制结晶法和浓度梯度进料的方式制备了Ni、Co和Mn三元素组分含量呈全梯度分布的类球形Ni_0.7Co_0.15Mn_0.15（OH）₂前驱体,与LiOH·H₂O均匀混合并焙烧后获得LiNi_0.7Co_0.15Mn_0.15O₂正极材料,系统研究了不同焙烧温度对材料Ni、Co和Mn三元素扩散情况、晶体结构及电化学性能的影响规律。通过能谱仪（EDXS）分析不同焙烧温度下材料颗粒中Ni、Co、Mn三元素的扩散程度。研究结果表明,在800℃下焙烧得到的正极材料梯度分布特征明显且电化学性能最佳,首次放电比容量为186.1 mAh·g^-1（2.8~4.3 V,0.2C）,2C大倍率充放电条件下循环200次后容量保持率为90.1%。这种材料兼具高比容量及良好的循环稳定性,可以用作下一代高能量密度锂离子电池正极材料。     

导体与点电荷之间的相互作用能的一点讨论

不带电荷的导体移到点电荷的静电场中时,导体表面会产生感应电荷.我们证明对任意形状的导体,导体和点电荷之间的相互作用能是点电荷与其镜象电荷之间库仑作用能的1/2,并且对此结果给出一个非常简单的解释.     

Methods for enhancing the capacity of electrode materials in low-temperature lithium-ion batteries

Lithium-ion batteries(LIBs) have evolved into the mainstream power source of ene rgy sto rage equipment by reason of their advantages such as high energy density,high power,long cycle life and less pollution.With the expansion of their applications in deep-sea exploration,aerospace and military equipment,special working conditions have placed higher demands on the low-temperature performance of LIBs.However,at low temperatures,the severe polarization and inferior electrochemical activity of electrode materials cause the acute capacity fading upon cycling,which greatly hindered the further development of LIBs.In this review,we summarize the recent important progress of LIBs in low-temperature operations and introduce the key methods and the related action mechanisms for enhancing the capacity of the various cathode and anode materials.It aims to promote the development of high-performance electrode materials and broaden the application range of LIBs.