锂离子电池用α-Fe2O3-Ag复合纳米棒负极材料的制备及储锂性能

采用FeOOH纳米棒为前驱体,通过层层自组装法及随后的热处理过程制备出α-Fe2O3-Ag复合纳米棒.采用透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)和电化学性能测试对样品的形貌、结构及电化学性能进行了表征.结果表明,Ag纳米颗粒均匀地分布在α-Fe2O3纳米棒的表面.作为锂离子电池负极材料,α-Fe2O3-Ag复合纳米棒表现出了较好的循环性能和较高的比容量.180个循环后,其比容量高达549.8 mA.h/g.     

Improving the properties of HDPE based separators for lithium ion batteries by blending block with copolymer PE-b-PEG

To improve the performances of HDPE-based separators, polyether chains were incorporated into HDPE membranes by blending with poly(ethylene-block-ethylene glycol) (PE-b-PEG) via thermally induced phase separation (TIPS) process. By measuring the composition, morphology, crystallinity, ion conductivity, etc, the influence of PE-b-PEG on structures and properties of the blend separator were investigated. It was found that the incorporated PEG chains yielded higher surface energy for HDPE separator and improved affinity to liquid electrolyte. Thus, the stability of liquid electrolyte trapped in separator was increased while the interfacial resistance between separator and electrode was reduced effectively. The ionic conductivity of liquid electrolyte soaked separator could reach 1.28 × 10-3 S.cm-1 at 25℃, and the electrochemical stability window was up to 4.5 V (versus Li + /Li). These results revealed that blending PE-b-PEG into porous HDPE membranes could efficiently improve the performances of PE separators for lithium batteries.     

Asymmetric syntheses of (−)-isoretronecanol and (−)-trachelantamidine

Short and concise total asymmetric syntheses of (−)-isoretronecanol and (−)-trachelantamidine are reported. Oxidative cleavage of tert-butyl (S,S,S,Z)-7-[N-benzyl-N-(α-methylbenzyl)amino]cyclohept-3-ene-1-carboxylate, followed by hydrogenolysis promoted in situ cyclisation/reduction, which provided rapid access to the bicyclic core within (−)-isoretronecanol. Analogous treatment of the C(1)-epimer gave (−)-trachelantamidine. Overall, the syntheses of (−)-isoretronecanol and (−)-trachelantamidine were completed in eight and seven steps and 20 and 9.5% yield, respectively, from commercially available starting materials.     

水热法制备富锂型Li_(2+4x)Mn_(0.6+2x)Ni_(0.6-6x)Cr_(0.8)O_4及其结构与电化学特性

采用水热法制备了系列富锂尖晶石型正极材料Li2+4xMn0.6+2xNi0.6-6xCr0.8O4(x=1/30,1/20,1/15,1/12),通过X射线衍射(XRD)、电感耦合等离子体-原子发射光谱(ICP-AES)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、傅里叶变换红外光谱(FTIR)、拉曼光谱、循环伏安(CV)和充放电测试等手段对其结构及电化学性能进行表征.结果表明,所制备的系列材料为富锂型高电压尖晶石结构正极材料,该系列样品在4.7 V左右有放电平台.x=1/15和x=1/12时,样品中的Cr为+3价,没有观测到Cr6+.随着x值的增大,样品中Li离子与过渡金属离子的混排减小,样品的充放电比容量逐渐增大,且2.7 V处的放电平台容量也增加.当x=1/12时,样品具有较好的充放电比容量和倍率特性,首次放电比容量为107.3 mA·h/g,20次循环后容量保持率为84.9%.     

Counter‐anion role in the formation of two supramolecular complexes: [Ag2(DPP)2](ClO4)2·CH3CN and [Ag2(DPP)2(NO3)2] {DPP is N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine}

The title compounds, bis{μ‐N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine‐κ²N¹:P}disilver bis(perchlorate) acetonitrile monosolvate, [Ag₂(C₁₈H₁₇N₂P)₂](ClO₄)₂·CH₃CN, (1), and bis{μ‐N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine‐κ²N¹:P}bis[(nitrato‐κ²O,O)silver], [Ag₂(C₁₈H₁₇N₂P)₂(NO₃)₂], (2), each contain disilver macrocyclic [Ag₂(C₁₈H₁₇N₂P)₂]²⁺ cations lying about inversion centres. The cations are constructed by two N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine (DPP) ligands linking two Ag⁺ cations in a head‐to‐tail fashion. In (1), the unique Ag⁺ cation has a near‐linear coordination geometry consisting of one pyridine N atom and one P atom from two different DPP ligands. Two ClO₄⁻ anions doubly bridge two metallomacrocycles through Ag...O and N—H...O weak interactions to form a chain extending in the c direction. The half‐occupancy acetonitrile molecule lies with its methyl C atom on a twofold axis and makes a weak N...Ag contact. In (2), there are two independent [Ag(C₁₈H₁₇N₂P)]⁺ cations. The nitrate anions weakly chelate to each Ag⁺ cation, leading to each Ag⁺ cation having a distorted tetrahedral coordination geometry consisting of one pyridine N atom and one P atom from two different DPP ligands, and two chelating nitrate O atoms. Each dinuclear [Ag₂(C₁₈H₁₇N₂P)₂(NO₃)₂] molecule acts as a four‐node to bridge four adjacent equivalent molecules through N—H...O interactions, forming a two‐dimensional sheet parallel to the bc plane. Each sheet contains dinuclear molecules involving just Ag1 or Ag2 and these two types of sheet are stacked in an alternating fashion. The sheets containing Ag1 all lie near x = , , etc, while those containing Ag2 all lie near x = 0, 1, 2 etc. Thus, the two independent sheets are arranged in an alternating sequence at x = 0, , 1, etc. These two different supramolecular structures result from the different geometric conformations of the templating anions which direct the self‐assembly of the cations and anions.     

Optofluidic droplet router

This contribution presents an optofluidic droplet router which is able to route and steer microdroplets using optically induced forces created solely by the bulk photovoltaic effect on a nonlinear substrate. The combination of microfluidic tools with the properties of a photorefractive crystal allows for the generation of dielectrophoretic forces that can be either repulsive, leading to virtual barriers, or attractive, creating virtual rails. The sign of these forces is solely determined by the electrical properties of the liquid medium under investigation. Moreover, the induced structures on the bottom of the microfluidic channel are optically reconfigurable, so that the same device can easily be adopted for different purposes. Appropriate droplet‐generating devices are fabricated by UV illumination of SU‐8 and polydimethylsiloxane replica molding of the master structures. The bottom of the channels is formed by an iron‐doped lithium niobate crystal, whose internal electric fields are induced by structured illumination patterns and exert dielectrophoretic forces on droplets in the microfluidic section.

     

三维大孔/介孔碳-碳化钛复合材料用于无枝晶锂金属负极

金属锂具有超高的理论容量(3860 mAh·g^-1)和低氧化还原电位(-3.04 V vs.标准氢电极),是极具吸引力的下一代高能量密度电池的负极材料。然而,循环过程中的体积膨胀、锂枝晶生长和“死锂”等问题严重的限制了其实际应用。合理设计三维骨架调控金属锂的成核行为是抑制锂枝晶生长的有效策略。本文中,我们发展了一种“软硬双模板”的方法合成了兼具大孔和介孔的三维碳-碳化钛(Three-dimensional macro-/mesoporous C-TiC,表示为3DMM-C-TiC)复合材料。多级孔道为金属锂的沉积提供了足够的空间,缓冲充放电中巨大的体积变化。此外,TiC的引入显著增强多孔骨架的导电性,改善锂金属的成核行为,促进金属锂的均匀成核和沉积,抑制锂枝晶生长。3DMM-C-TiC||Li电池测试表明,在循环300圈以后,库伦效率仍保持在98%以上。此外,所得材料与LiFePO₄ (LFP)组成的全电池也表现出优异的倍率和循环性能。本工作为无枝晶锂金属负极的设计提供了新的思路。     

表面限域掺杂提升高比能正极材料稳定性

Lithium ion batteries (LIBs) have broad applications in a wide variety of a fields pertaining to energy storage devices. In line with the increasing demand in emerging areas such as long-range electric vehicles and smart grids, there is a continuous effort to achieve high energy by maximizing the reversible capacity of electrode materials, particularly cathode materials. However, in recent years, with the continuous enhancement of battery energy density, safety issues have increasingly attracted the attention of researchers, becoming a non-negligible factor in determining whether the electric vehicle industry has a foothold. The key issue in the development of battery systems with high specific energies is the intrinsic instability of the cathode, with the accompanying question of safety. The failure mechanism and stability of high-specific-capacity cathode materials for the next generation of LIBs, including nickel-rich cathodes, high-voltage spinel cathodes, and lithium-rich layered cathodes, have attracted extensive research attention. Systematic studies related to the intrinsic physical and chemical properties of different cathodes are crucial to elucidate the instability mechanisms of positive active materials. Factors that these studies must address include the stability under extended electrochemical cycles with respect to dissolution of metal ions in LiPF₆-based electrolytes due to HF corrosion of the electrode; cation mixing due to the similarity in radius between Li⁺ and Ni²⁺; oxygen evolution when the cathode is charged to a high voltage; the origin of cracks generated during repeated charge/discharge processes arising from the anisotropy of the cell parameters; and electrolyte decomposition when traces of water are present. Regulating the surface nanostructure and bulk crystal lattice of electrode materials is an effective way to meet the demand for cathode materials with high energy density and outstanding stability. Surface modification treatment of positive active materials can slow side reactions and the loss of active material, thereby extending the life of the cathode material and improving the safety of the battery. This review is targeted at the failure mechanisms related to the electrochemical cycle, and a synthetic strategy to ameliorate the properties of cathode surface locations, with the electrochemical performance optimized by accurate surface control. From the perspective of the main stability and safety issues of high-energy cathode materials during the electrochemical cycle, a detailed discussion is presented on the current understanding of the mechanism of performance failure. It is crucial to seek out favorable strategies in response to the failures. Considering the surface structure of the cathode in relation to the stability issue, a newly developed protocol, known as surface-localized doping, which can exist in different states to modify the surface properties of high-energy cathodes, is discussed as a means of ensuring significantly improved stability and safety. Finally, we envision the future challenges and possible research directions related to the stability control of next-generation high-energy cathode materials.     

Progress on High Voltage PEO-based Polymer Solid Electrolytes in Lithium Batteries

Polymer electrolytes have attracted great interest for next-generation lithium-based batteries on account of safety and high energy density. In this review, we assess recent progress on the design of poly(ethylene oxide)(PEO)-based solid polymer electrolytes in high voltage lithium batteries and identify possible side reactions between PEO-based electrolytes and existing cathodes. We provide an overview of the ways to enhance high voltage resistance of PEO-based electrolytes. Those include components blend, molecular design and interface modification. With these efforts, we want to present new insights into rational design of PEO-based electrolytes to develop solid-state lithium batteries for advanced performance.