ViscosityB-coefficients for lithium perchlorate in ethylene glycol-water mixtures

Viscosities and densities of lithium perchlorate solutions in different ethylene glycol-water compositions have been measured at 25.0 and 35.0 °C. From these data, the correspondingB-coefficients of theJones-Dole equation have been determined. TheB-value depends on the solvent composition and it reaches a maximum in the water-rich region. This behaviour is analysed in terms of ionic solvation and solvent structure.

---

Viskositäts-B-Koeffizienten für Lösungen von Lithiumperchlorat in Ethylenglykol-Wasser-Mischungen

Zusammenfassung Es wurden die Dichten und Viskositäten für Lösungen von Lithiumperchlorat in verschieden zusammengesetzten Ethylenglykol-Wasser-Mischungen bei 25 °C und 35 °C gemessen. Auf Grund der erhaltenen Daten wurden dieB-Koeffizienten in den entsprechendenJones-Dole-Gleichungen für die relative Viskosität bestimmt. DieB-Werte hängen von der Zusammensetzung des Lösungsmittels ab und erreichen im wasserreichen Konzentrationsgebiet ein Maximum. Dieses Verhalten wird in Hinblick auf die Ionensolvatation und die Struktur des Lösungsmittels analysiert.

     

Asymmetric Reduction Using Lithium Aluminum Hydride Modified with Chiral Ligands Prepared from (1R)-(-)-β-Pinene

The reduction of prochiral ketones using chiral reducing reagents, prepared from lithium aluminum hydride and (-)-(1R, 2S, 3S, 5R)-10-anilinopinanediol (5) and (-)-(1R, 2S, 3S, 5R)-10-N-methylanilinopinanediol (6), affords chiral secondary alcohols in useful chemical yields (70 ～ 93%) but in low optical purity (8 ～ 33% ee). Modifiers 5 and 6 are synthesized from (lR)-(-)-β-pinene in three steps.     

Metal ion distribution and solubility of Mn1−xCux(HCOO)2 · 2 H2O Mixed Crystals [1–5]

The metal ion distribution on the two metal sites of monoclinic Mn_1?xCu_x(HCOO)₂ · 2(H,D)₂O mixed crystals are studied by infrared and Raman spectroscopic methods. The spectral regions 3 200–3 400 cm^?1 (v_OH), 2 875–2 990 cm^?1 (v_CH), 2 330–2 500 cm^?1 (v_OD of matrix isolated HDO molecules), 1 350–1 400 cm^?1 (symmetric CO₂ stretching modes), 570–950 cm^?1 (H₂O librations), and 490 cm^?1 (M? O lattice modes) are mostly sensitive to the metal ions present. The frequency shifts of these bands with increasing content of copper show that Cu²⁺ prefers the M(1) site, coordinated by HCOO^? only. The strengths of the hydrogen bonds increase on going from manganese to copper formate, due to the increased synergetic effect of Cu²⁺. Solubility and X-ray data of the mixed crystals are included. Irrespective of the same crystal structure, two series of mixed crystals are formed: eutonic area at 0.65 ≥ x ≥ 0.5.     

Effect of the ZnNi y Mn2– y O4 (0 ≤ y ≤ 1) spinel composition on electrochemical lithium insertion

The electrochemical insertion of lithium in the spinel-type manganite with the formula ZnNi _y Mn_{2– y} O₄ has been studied. The galvanostatic discharge curves show that the best performance is obtained for y = 0.25, where a tetragonal to cubic structural transformation occurs. The thermodynamics and kinetics of the process of insertion of the lithium into the tetragonal spinel Li _x ZnNi_0.25Mn_1.75O₄ (x = 0.05–1.3) have been studied. The molar thermodynamic quantities, such as enthalpy, entropy and free energy determined by EMF-T measurements, varied with the lithium concentration in the oxide structure, and a major variation was observed around x = 0.8. The chemical diffusion coefficient of lithium in these spinels was also determined. Structural analysis, degree of oxidation and magnetic susceptibility measurements were carried out for the lithiated oxides in order to obtain the cationic distribution as a function of x. It has been possible to demonstrate that, upon lithium insertion, Mn⁴⁺ ions on B sites are reduced to Mn³⁺ and then to Mn²⁺. A cooperative Jahn-Teller effect is present in these spinel manganese-nickel oxides. Received: 4 February 1997 / Accepted: 11 April 1997     

Base-freie Tris(trimethylsilyl)methyl-Derivate des Lithiums,Aluminiums, Galliums und Indiums

Base-free Tris(trimethylsilyl)methyl Derivatives of Lithium, Aluminium, Gallium, and Indium Base-free LiR* (R*=-C(SiMe₃)₃) has been prepared from R*Cl and Li-metal in toluene at 85?90°C and used to synthesize the metallanes R*MMe₂ with M = Al, Ga and In, respectively. The NMR (¹H, ¹³C, ²⁹Si) and the vibrational spectra of these trisyl compounds have been discussed. AlCl₃ and LiR*(ratio 1 : 1) forms the metallate metallate Li[R*AlCl₃]. The triclinic unit cell (space group P1 ) consists of a centrosymmetric assoziate, formed by four Li[R*AlCl₃]- units with Al? Cl…?Li bridges, two pairs of Li-atoms differing in their chlorine-coordination and two disordered toluene molecules, inserted in the crystal lattice (R₁wR₂ =0,0444/0,1072). The reaction of GaCl₃ with LiR* (I :1) gives the unusual sesquichloride (R*Ga(Cl_1,33)Me_0,67)₃ in moderate yield. The X-ray structure determination shows a Ga₃Cl₃-skeleton with chairconformation and disordered, terminal gallium ligands (R₁/wR₂= 0,0646/0,2270).     

Thermal dehydration of lithium metaborate dihydrate and phase transitions of anhydrous product

Reaction steps and mechanisms of the thermal dehydration of lithium metaborate dihydrate were investigated by means of thermoanalytical measurements, high temperature powder X-ray diffractometry, FT-IR spectroscopy, and microscopic observations. The first half of thermal dehydration was characterized by the melting of the sample producing viscous surface layer, the formation of bubbles on the particle surfaces, and the sudden mass-loss taking place by an opportunity of cracking and/or bursting of the bubble surface layer. The second half of the dehydration with a long-tailed mass-loss process in a wide temperature region was divided further into three distinguished reaction steps by the measurements of controlled rate thermal analysis. During the course of the thermal dehydration, four different poorly crystalline phases of intermediate hydrates were observed, in addition to an amorphous phase produced by an isothermal annealing. Just after completing the thermal dehydration, an exothermic DTA peak of the crystallization of β-LiBO₂ was appeared at around 750 K. The phase transition from β-LiBO₂ to α-LiBO₂ was observed in the temperature range of 800-900 K, which subsequently melted by indicating a sharp endothermic DTA peak with the onset temperature at 1101.4 ± 0.6 K.     

锆助剂对低温液相合成甲醇用铜铬硅催化剂性能的影响

考察了含锆的铜铬硅催化剂低温液相合成甲醇性能，并进行了BET、TPR-H2、TPD-H2、TPD-CO、XRD和XPS表征。结果表明，锆作为结构助剂及电子助剂对催化剂在低温液相合成甲醇反应中具有显著的促进作用，反应活性可提高32.25 ％。锆助剂能有效提高催化剂的比表面积，促进催化剂中铜铬组分的分散及表面富集。ZrO2加入在催化剂表面产生的Cu+与催化活性的改善密切相关，Zr4+、Cr3+、Cu+可形成复合中心，为价态的稳定性提供微环境，在H2活化及C O键的断裂等反应步骤中起重要作用。     

Intercalation materials for lithium rechargeable batteries

An overview is given of intercalation materials for both the negative and the positive electrodes of lithium batteries, including the results of our own research. As well as lithium metal as a negative electrode, we consider insertion materials based on aluminium alloys. In the case of the positive electrode metal-oxides based on manganese, nickel and cobalt are discussed. Received: 27 May 1997 / Accepted: 30 July 1997