Revealing Capacity Degradation of Ge Anodes in Lithium-Ion Batteries Triggered by Interfacial LiH

The Germanium (Ge), as a fast-charging and high specific capacity (1568 mAh g⁻¹) alloy anode, is greatly hampered in practical application by poor cyclability. To date, the understanding of cycling performance degradation remains elusive. This study illustrates that, contrary to conventional beliefs, most of the Ge material in failed anodes still retains good integrity and does not undergo severe pulverization. It is revealed that capacity degradation is clearly correlated to the interfacial evolution of lithium hydride (LiH). Tetralithium germanium hydride (Li₄Ge₂H), as a new species derived from LiH, is identified as the culprit of Ge anode degradation, which is the dominant crystalized component in an ever-growing and ever-insulating interphase. The significantly increased thickness of the solid electrolyte interface (SEI) is accompanied by the accumulation of insulating Li₄Ge₂H upon cycling, which severely retards the charge transport process and ultimately triggers the anode failure. We believe that the comprehensive understanding of the failure mechanism presented in this study is of great significance to promoting the design and development of alloy anode for the next generation of lithium-ion batteries.     

Detecting unalloyed tin in LiSn2(PO4)3-based anodes with Mössbauer spectroscopy

The first discharge of the Li⁺ ion anode material LiSn₂(PO₄)₃ was investigated with Mössbauer spectroscopy and electrochemical techniques. Mössbauer spectroscopy provided insight into the structure of the tin atoms of the fully discharged anode materials. Spectra consist of overlapping peaks, which are assigned to noncrystalline β-Sn and Li–Sn alloy domains. An analysis of the relative intensities of the Mössbauer spectra shows the relative abundance of β-Sn increases at the expense of the Li–Sn alloy as the discharge rate increases. Cell polarization occurs at higher discharge rates, leading to inefficient electrode utilization and poor cycling performance. Sluggish Li⁺ ion diffusion through the amorphous Li₃PO₄ network that is formed early in the discharge process might be responsible for the poor electrochemical performance and the accumulation of unalloyed tin.     

The reductive dimerization of some 1,3-dienes and of 1,3,5-cycloheptatriene in the presence of trimethylchlorosilane: a DFT investigation

Treatment of 1,3-dienes and 1,3,5-cycloheptatriene by chlorotrimethylsilane in the presence of wire of lithium led mainly to reductive dimerization with formation of bis(allylsilane) derivatives. Bis-silyl compounds obtained: from 1,3-butadiene, 1,8-bis(trimethylsilyl)-2,6-octadiene (70%); from isoprene, (Z,Z)-2,7-dimethyl-1,8-bis(trimethylsilyl)-2,6-octadiene (44%) and 2,6-dimethyl-1,8-bis(trimethylsilyl)-2,6-octadiene (19%); from butadiene-isoprene mixture (1:1), 3-methyl-1,8-bis(trimethylsilyl)-2,6-octadiene (55%); from 2,3-dimethylbutadiene, (E,E)-2,3,6,7-tetramethyl-1,8-bis(trimethylsilyl)-2,6-octadiene (36%), from 1,3-cyclohexadiene, 4,4′-bis(trimethylsilyl)-bicyclohexyl-2,2′-diene (48%); from 1,3,5-cycloheptatriene, 1,1′-bi[(S^∗,S^∗)-6-(trimethylsilyl)cyclohepta-2,4-dien-1-yl] (53%). The structure of the various intermediates (radical anion, dianion, silylated radical, silylated anion) has been established by calculations at the B3LYP/6-311++G(d,p) level of theory with zero-point energy correction. These results are in accordance with a pathway including the formation of a radical anion, its silylation furnishing to a γ-silylated allylic radical followed by a dimerization reaction in the head to head manner.     

Nano-sized lithium manganese oxide dispersed on carbon nanotubes for energy storage applications

Nano-sized lithium manganese oxide (LMO) dispersed on carbon nanotubes (CNT) has been synthesized successfully via a microwave-assisted hydrothermal reaction at 200 °C for 30 min using MnO₂-coated CNT and an aqueous LiOH solution. The initial specific capacity is 99.4 mAh/g at a 1.6 C-rate, and is maintained at 99.1 mAh/g even at a 16 C-rate. The initial specific capacity is also maintained up to the 50th cycle to give 97% capacity retention. The LMO/CNT nanocomposite shows excellent power performance and good structural reversibility as an electrode material in energy storage systems, such as lithium-ion batteries and electrochemical capacitors. This synthetic strategy opens a new avenue for the effective and facile synthesis of lithium transition metal oxide/CNT nanocomposite.     

A mild hydrolysis of esters mediated by lithium salts

When treated with amine bases such as triethylamine and various lithium salts in wet solvents, esters are efficiently hydrolyzed to the corresponding acids in good yields. Esters incorporating an α- or β-heteroatom with respect to the ester carbonyl group are hydrolyzed rapidly even at room temperature. To further demonstrate the usefulness of this method, one example is provided where hydrolysis of acetylated camphorsultam is mediated by LiBr.     

Electrochemical Performance of LiMn2O4/LiFePO4 Blend Cathodes for Lithium Ion Batteries

A series of LiMn₂O₄/LiFePO₄ blend cathodes was prepared by hand milling and ball milling in order to compensate the disadvantage of spinel LiMn₂O₄ and olivine LiFePO₄. The morphologies of the blends were studied by scanning electron microscopy, and their electrochemical properties were studied by charge-discharge cycling, cyclic voltammetry and electrochemical impedance spectroscopy. It is easy to obtain uniform LiMn₂O₄/LiFePO₄ blends by the hand milling technique, while significant particle agglomeration is caused by the ball milling technique. When the LiMn₂O₄:LiFePO₄ mass ratio is 1:1, the nano-sized LiFePO₄ powders not only uniformly cover the micron-sized LiMn₂O₄ particles but also effectively fill in the cavities of the LiMn₂O₄ space. Such morphology offers a good electrical contact and a high tap density, which leads to a high discharge capacity and good cycle stability.     

Synthesis of LiMn2O4 Nano-wires via Flux Method and Their Usage as Cathode Material for Lithium Ion Batteries

LiMn₂O₄ nano-wires with ideal size distribution were readily synthesized by flux method. Samples prepared conventionally were used as the comparison references to investigate the effect of flux. The structural, morphological and electrochemical properties of nano-sized materials were examined by powder X-ray diffraction(XRD) analysis, scanning electron microscopy(SEM) and charge-discharge cycling analysis. Results from galvanostatic charge-discharge analysis show that the samples prepared at 700℃ via flux method(FM-700) afford the highest initial discharge capacity of 125.5 mA·h/g between 3.0 to 4.3 V at a rate of 0.2 C. After 50 cycles, a cycling retention of 89.6% is evident. Overall, the LiMn₂O₄ nano-wires developed in this work seem to be promising cathode materials for lithium ion batteries suitable to different energy-saving settings.     

Reversible and Selective CO2 to HCO2− Electrocatalysis near the Thermodynamic Potential

Reversible catalysis is a hallmark of energy‐efficient chemical transformations, but can only be achieved if the changes in free energy of intermediate steps are minimized and the catalytic cycle is devoid of high transition‐state barriers. Using these criteria, we demonstrate reversible CO₂/HCO₂^? conversion catalyzed by [Pt(depe)₂]²⁺ (depe=1,2‐bis(diethylphosphino)ethane). Direct measurement of the free energies associated with each catalytic step correctly predicts a slight bias towards CO₂ reduction. We demonstrate how the experimentally measured free energy of each step directly contributes to the <50 mV overpotential. We also find that for CO₂ reduction, H₂ evolution is negligible and the Faradaic efficiency for HCO₂^? production is nearly quantitative. A free‐energy analysis reveals H₂ evolution is endergonic, providing a thermodynamic basis for highly selective CO₂ reduction.     

Fabrication of carbon microcapsules containing silicon nanoparticles-carbon nanotubes nanocomposite by sol-gel method for anode in lithium ion battery

Carbon microcapsules containing silicon nanoparticles (Si NPs)-carbon nanotubes (CNTs) nanocomposite (Si-CNT@C) have been fabricated by a surfactant mediated sol-gel method followed by a carbonization process. Silicon nanoparticles-carbon nanotubes (Si-CNT) nanohybrids were produced by a wet-type beadsmill method. To obtain Si-CNT nanocomposites with spherical morphologies, a silica precursor (tetraethylorthosilicate, TEOS) and polymer (PMMA) mixture was employed as a structure-directing medium. Thus the Si-CNT/Silica-Polymer microspheres were prepared by an acid catalyzed sol-gel method. Then a carbon precursor such as polypyrrole (PPy) was incorporated onto the surfaces of pre-existing Si-CNT/silica-polymer to generate Si-CNT/Silica-Polymer@PPy microspheres. Subsequent thermal treatment of the precursor followed by wet etching of silica produced Si-CNT@C microcapsules. The intermediate silica/polymer must disappear during the carbonization and etching process resulting in the formation of an internal free space. The carbon precursor polymer should transform to carbon shell to encapsulate remaining Si-CNT nanocomposites. Therefore, hollow carbon microcapsules containing Si-CNT nanocomposites could be obtained (Si-CNT@C). The successful fabrication was confirmed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). These final materials were employed for anode performance improvement in lithium ion battery. The cyclic performances of these Si-CNT@C microcapsules were measured with a lithium battery half cell tests.     

添加Li+对MgO催化性能的影响

本文以IR、TPD、丁烯异构化及直接脱氢反应为手段,对不同Li⁺添加量的MgO催化剂进行了研究。结果表明,表面低配位氧集团是催化剂的主要活性物种,起碱中心作用;表面金属离子起L酸中心作用。酸、碱中心的数目、强度随Li⁺添加量不同而呈规律性变化。这种变化影响了酸、碱中心的协同作用,从而影响其催化活性。