Optical absorption of lithium metal vapor at high temperatures

Experimental results are reported for a unique spectroscopic device called the Plasma Spectroscopy Cell. Optical absorption of lithium metal vapor was observed at high density and temperature. Absorption spectra are analyzed using theoretical calculations of absorption cross sections for lithium-helium interactions, and singlet and triplet state transitions of diatomic lithium in the visible spectral range. This is believed to be the most complex example yet calculated in which absolute bound-bound, bound-free, free-bound, and free-free contributions for all possible optically allowed transitions are all included, in quite respectable agreement with experiment.     

Proton-exchanged optical waveguides fabricated by glutaric acid

In this paper, we first report that a new proton source, glutaric acid, has been used to fabricate optical waveguides in Z-cut lithium niobate crystals. The relationship was experimentally established between proton-exchanged (PE) waveguide parameters and fabrication conditions. It is shown that this new organic acid can be used to obtain deep PE waveguides in fast diffusion speed (0.275 μm²/h at 221°C) and with low loss (0.2 dB/cm). It provides an alternative approach for fabricating PE waveguides in lithium niobate substrate.     

Synthesis and crystal structure of the octahedral cluster complex [Th(DMSO)8Cl][Re6Se7Cl7]

A cluster complex of the composition [Th(DMSO)₈Cl][Re₆Se₇Cl₇] has been obtained by interaction of ThCl₄ solution in DMSO with a water solution of K₃[Re₆Se₇Cl₇] and KCl. The compound crystallizes in the rhombic space group Pbcm with unit cell parameters a = 12.262(2) Å, b = 19.653(6) Å, c = 23.603(6) Å, V = 5688(2) ų, Z = 4, d _calc = 3.282 g/cm³. The structure is built from centrosymmetric cluster anions [Re₆Se₇Cl₇]^3? and complex cations [Th(DMSO)₈Cl]³⁺ possessing mirror-plane symmetry, half of the DMSO ligands being doubly disordered.     

Deposition conditions in tailoring the morphology of highly porous reticular films prepared by electrostatic spray deposition (ESD) technique

Spongy-like reticular structure is a unique morphology fabricated by electrostatic spray deposition (ESD) technique. The effects of solvent, substrate temperature, precursor feeding rate, static electric field strength, and deposition time on tailoring the reticular structure were investigated. Scanning electron microscopy was used to observe the film morphology. MnO_x or LiMn₂O₄ were selected as the model materials. It is found that in addition to the conventional solvent butyl carbitol, other kinds of solvents such as ethylene glycol and propylene glycol can also be used to obtain reticular films at a suitable substrate temperature. Porous films with a low cross-linking degree pore structure can be prepared by increasing precursor feeding rate or decreasing substrate temperature. Increasing the deposition time or the electric field strength helps to obtain reticular films with more homogeneous pore size distribution. In addition, the addition of a high boiling-point solvent in mixed alcohol solvent results in the increase of proper substrate temperature. It is concluded that the fluidity of the spray droplets on the surface of a hot substrate is an important factor to form a reticular film.     

Hydrothermal synthesis of FeS2 for lithium batteries

Nanocrystalline FeS₂ cathode material of lithium cell was synthesized from cheap materials of FeSO₄, Na₂S₂O₃, and sulfur by a hydrothermal process. The scanning electron microscopy analysis showed the obtained material was nano-sized, about 500 nm. The X-ray powder diffraction analysis showed that the synthetic FeS₂ material had two phases of the crystalline structure, pyrite and marcasite. The phase of marcasite seems to have no negative effect on the electrochemical performance of the material. The synthetic FeS₂ showed a significant improvement of electrochemical performance for Li/FeS₂ cells.     

用离子速度影象技术研究n-C4H9Br的光解

利用离子速度影象技术研究了正一溴丁烷(n-C4H9Br)在231~267 nm波段的光解,得出了如下结论:正一溴丁烷(n-C4H9Br)在231~267 nm波段的吸收源于基态到三个最低激发态的跃迁,这三个激发态标识为1A″、2A′和3A′;发生在这三个排斥态的势能面(PES)上的光解最终导致C4H9 Br(2P3/2)或C4H9 Br*(2P1/2)的产生;2A′和3A′态之间存在避免交叉(Avoided crossing)会影响最终的光解产物;从基态1A′到激发态1A″的跃迁矩垂直于对称面,也就垂直于C-Br键;从基态1A′到激发态3A′的跃迁矩平行于对称面,同时平行于C-Br键;从基态1A′到激发态2A′的跃迁矩在对称面内,且与C-Br键成53.1°夹角.我们也讨论了正一溴丁烷(n-C4H9Br)在234 nm和267 nm附近光解时的避免交叉几率(Avoided crossingprobability),以及它对单通道相对产额(Relative fraction of the individual pathways)的影响.     

Electrical conductance of solutions of lithium nitrate in 1,3-diaminopropane

Electrical conductances and densities of the LiNO₃-1,3-diaminopropane system have been measured as a function of composition and temperature. The results suggest that the solvent molecules may act as bridges between Li⁺ ions at higher concentration of LiNO₃.     

Reaction of SbPO4 with lithium in non-aqueous electrochemical cells: preliminary study and evaluation of its electrochemical performance in anodes for lithium ion batteries

SbPO₄, a phosphate with a layered structure, was tested as an electrode material for lithium cells spanning the 3.0-0.0 V range. Two main electrochemical processes were detected as extensive plateaus at ca. 1.6 and 0.7 V in galvanostatic measurements. The first process was found to be irreversible, thus excluding a potential intercalation-like mechanism for the reaction and being better interpreted as a decomposition reaction leading to the formation of elemental Sb. This precludes the use of this compound as a cathodic material for lithium cells. By contrast, the process at 0.7 V is reversible and can be ascribed to the formation of lithium-antimony alloys. The best electrochemical response was obtained by cycling the cell at a C/20 discharge rate over the voltage range 1.25-0.25 V. Under these conditions, the cell delivers an average capacity of 165 Ah/kg—a value greater than those reported for other phosphates—upon successive cycling.     

Microscopically structural studies of lithium niobate powders

On the basis of the crystallographic characteristics of lithium niobate (LN) crystals, Law of Bravais and Pauling's third rule (i.e. Polyhedral Sharing Rule) are employed with the aim to find the relationship between the crystal structure and morphological faces of LN powders. In order to validate our analytical results, we have successfully synthesized LN powders and measured the corresponding X-ray powder diffraction. Our results show that the structural analysis is consistent with the experimental data and is helpful and effective for us to control the single-crystal growth and to design superstructures at the specific plane, starting from the viewpoint of the microscopic behaviors of constituent chemical bonds and polyhedra in the crystallographic frame.