Acoustic absorption in aqueous potassium phosphate

Measurements of acoustic absorption and velocity as a function of frequency and concentration in KH₂PO₄–K₂HPO₄ buffers at 4°C and pH 5-7 are reported. The dependence of the observed acoustic relaxation parameters on concentration is consistent with that to be expected from perturbation of a monomer-dimer equilibrium with an equilibrium constant [for 2H₂PO ₄ ^– (H₂PO₄)₂ ^2–] of 0.21 M^–1, a bimolecular rate constant of 5×10⁸ M^–1-sec^–1 and a standard volume change of –5 cm³ mole. The equilibrium constant for H₂PO ₄ ^– + HPO₄ ^2–H₃(PO₄)₂ ^3– is estimated to be 0.7 M^–1.     

Nitrate ion association with Nd3+

The overall stability constantsK ₁ andK ₂ of NdNO ₃ ²⁺ and Nd(NO₃) ₂ ⁺ complexes were determined (K ₁=1.77;K ₂=1.28) using an extraction method with tri-n-butyl phosphate as the extractant. The ratio ₁/₂ of the stepwise stability constants is discussed. It was established that the Nd(NO₃) ₂ ⁺ complex was an outer-sphere ion pair.

---

Die Assoziation von Nitrat-Ion mit Nd³⁺

Zusammenfassung Mittels einer Extraktionsmethode wurden die StabilitätskonstantenK ₁ undK ₂ von NdNO ₃ ²⁺ - und Nd(NO₃)⁺-Komplexen bestimmt (K ₁=1.77;K ₂=1.28; Tri-n-butylphosphat als Extraktionsmittel). Das Verhältnis ₁/₂ der stufenweisen Stabilitätskonstanten wird diskutiert. Es stellte sich heraus, daß der Nd(NO₃)⁺-Komplex als ein Outer-Shere-Ionenpaar vorliegt.

     

Thermal decomposition kinetics of titanium hydride and Al alloy melt foaming process

Metal foams, now one of research foci, are a newclass of materials with low densities and novel physi-cal, mechanical, thermal, electrical and acoustic prop-erties[1—8]. Demands from high-tech make Al alloyfoam, which has much higher specific strength than ofpure Al foam, the new development focus[9—11]. Melt foaming process is one of the approaches tofabricate Al foam and Al alloy foam and their porestructure (pore diameter and porosity) has close rela-tionship with the thermal decompo…     

Mesoporous titanium dioxide as a novel solid-phase extraction material for flow injection micro-column preconcentration on-line coupled with ICP-OES determination of trace metals in environmental samples

Mesoporous titanium dioxide as a novel solid-phase extraction material for flow injection micro-column preconcentration on-line coupled with ICP-OES determination of trace metals (Co, Cd, Cr, Cu, Mn, Ni, V, Ce, Dy, Eu, La and Yb) in environmental samples was described. Possessing a high adsorption capacity towards the metal ions, mesoporous titanium dioxide has found to be of great potential as an adsorbent for the preconcentration of trace metal ions in samples with complicated matrix. The experimental parameters including pH, sample flow rate, volume, elution and interfering ions on the recovery of the target analytes were investigated, and the optimal experimental conditions were established. Under the optimized operating conditions, a preconcentration time of 90 s and elution time of 18 s with enrichment factor of 10 and sampling frequency of 20 h⁻¹ were obtained. The detection limits of this method for the target elements were between 0.03 and 0.36 μg L⁻¹, and the relative standard deviations (R.S.D.s) were found to be less than 6.0% (n =7, c =5 ng mL⁻¹). The proposed method was validated using a certified reference material, and has been successfully applied for the determination of the afore mentioned trace metals in natural water samples and coal fly ash with satisfactory results.     

Neue acetonylsubstituierte Azole II. 3-Acetonyl-1,2,4-oxadiazole, 2-Acetonyl-1,3,4-oxadiazole und 5-Acetonyl-1,2,4-thiadiazole

3-Acetonyl-1,2,4-oxadiazoles and 2-acetonyl-1,3,4-oxadiazoles are accessible starting with the ketal of acetoacetamide oxime and the ketal of acetoacetic acid hydrazide, respectively. 5-Acetonyl-1,2,4-thiadiazoles are obtained from 5-chloro-1,2,4-thiadiazoles andtert.-butyl acetoacetate. These Acetonyl-azoles are starting materials for three series of azolylvinyl phosphates and phosphonates.

Herrn Prof. Dr.Klaus Weissermel zu seinem 60. Geburtstag.     

Carbenoid Complexes of Electron-Deficient Transition Metals—Syntheses of and with Short-Lived Building Blocks

The relation of thermodynamic stability and kinetic lability of σ-organometallic compounds of transition metals, together with an improved understanding of the subtle interactions between central metal, ligands, and substrates, has increased the chemist's ability to plan organometallic syntheses. This article presents new results on intermediary and isolable synthetic building blocks incorporating metal–ligand multiple bonds of electron-deficient transition metals; the main emphasis will be placed on compounds with titanium–carbon double bonds. This particular class of compounds is mainly generated by H-transfer reactions starting from readily accessible alkyl and alkenyl derivatives. The preparative use of [L₂Ti(CHR₂)R′] derivatives as sources for [L₂Ti?CR₂] intermediates will be discussed, as well as the nature of these intermediates. Application of the same approach to vinyltitanium compounds [L₂Ti(CH?CH₂)R] opens up an access to a short-lived metallaallene derivative [L₂Ti?C?CH₂] of an electron-deficient transition metal. The reactivity of these synthetic building blocks is mainly characterized by the nucleophilic properties of the α-C atoms as well as by the spatial orientation of the π-bonding planes. Numerous cycloaddition products with unsaturated substrates could be isolated and characterized for the first time by using [L₂Ti?C?CH₂] intermediates. Hence it is possible to compare the properties of a multitude of metallacyclic ring systems with those obtained from “Tebbe–Grubbs chemistry”, and in this context, the dependence of the properties of metallacyclic four-membered rings on the substitution pattern is discussed. This class of compounds includes the metallaoxetanes, which have been obtained for the first time by the cycloaddition of the [CpTi?C?CH₂] intermediate with cumulenes and metal carbonyls. The differing cycloreversion behavior of these metallaoxetanes enables the differentiation of species exhibiting classical and nonclassical reactivity. The number and position of the exocyclic double bonds are the determining factors of the reactivity of the formed metallacycles. The discussion of the products obtained from titanium methylene and vinylidene building blocks is an up-to-date report on the formation and applications of carbene complexes and carbene intermediates of group 4 metals.     

Preparation and lithium doping of gallium oxynitride by ammonia nitridation via a citrate precursor route

Gallium oxynitride, isostructural to hexagonal gallium nitride (h-GaN), was obtained by ammonia nitridation of a precursor prepared from the addition of citric acid to an aqueous solution of gallium nitrate. Gallium oxynitride produced at 750 °C had a small amount of gallium vacancies, and was formulated as (Ga_0.89□_0.11) (N_0.66O_0.34) where the symbol □ stands for gallium vacancy. Both the gallium vacancies and oxygen substituted for nitrogen were randomly distributed within the structure. The amount of vacancies decreased with nitridation temperatures in the range of 750-850 °C. Approximately, 10 at% Li⁺ was doped into the gallium oxynitride, using a similar preparation with the additional presence of lithium nitrate, resulted in the random substitution of Ga³⁺ in an atomic ratio of Li/Ga<1 at 750 °C. Oxygen was codoped with lithium and substituted nitrogen in the wurtzite-type crystal lattice. These substitutions reduced the electrical conductivity in the gallium oxynitride semiconductor. A new oxynitride, Li₂Ga₃NO₄, was also obtained with Li₂CN₂ impurity using similar preparations from a mixture of Li/Ga?1. The crystal structure was isostructural with h-GaN, and was refined as P6₃mc with a=0.31674(1) nm, and c=0.50854(2) nm. The Ga and Li occupancies at the 2b site were refined to be 0.6085 and 0.3915, respectively, assuming that the other 2b site was randomly occupied with 1/5O and 4/5N. When the new compound was washed for over 1 min for the removal of Li₂CN₂ impurities, it was decomposed to a mixture of α-GaOOH and α-LiGaO₂. The as-prepared product with Li/Ga=1 showed the highest intensity in yellow luminescence among the products under excitation at 254 nm.     

Electrochemical reaction of lithium with nanosized vanadium antimonate

Nanometric vanadium antimonate, VSbO₄, was prepared by mechanical milling from Sb₂O₃ and V₂O₅ and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Mossbaüer spectroscopy (MS) and X-ray photoelectron spectroscopy (XPS) techniques. Its reactivity towards lithium was examined by testing Li/VSbO₄ cells under galvanostatic and potentiostatic regimes. The amount of Li inserted was found to be consistent with a two-step process involving the reactions (i) VSbO₄+8 Li→Sb+V+4 Li₂O and (ii) Sb+3 Li→Li₃Sb, the former being virtually irreversible and the latter reversible as suggested by the shape of the anodic and cathodic curves. Ex situ XPS measurements of the discharged and charged electrode provided direct evidence of the formation of alloyed Sb and confirmed the results of the potentiostatic curves regarding the irreversible or reversible character of the previous reactions. The Li/VSbO₄ cell exhibited acceptable electrochemical performance, which surpassed that of other Sb-based compounds as the likely result of the formation of V and its associated enhanced electrode conductivity.     

The Intelligent Properties of Micro－reactors for Preparating Nanoparticles

TiO2 nanoparticles were synthesized by using micro-reactors. The shape and size of the nanoparticles produced from the original micro-reactors and the five times recycled micro-reactorsmother liquor were investigated on transmission electron microscopy (TEM) by using the original sample, freeze prepared sample, and dyeing treated sample, respectively. UV-VIS spectrometry was used to study the growth process of TiO2 nanoparticles in main reactors. The results showed that micro-reactors with nanometer magnitude had spherical or oval structures, and could restore to their original structure after they were destroyed. The products prepared in the original micro-reactors were similar to that in the micro-reactors recycled for many times, suggesting that the micro-reactors had memory function.     

Ternäre Lithium-Selten-Erd-Nitrate mit einsamen Nitrationen: Li3[M(NO3)5](NO3) (M = Gd?Lu,Y). Die Kristallstruktur von Li3Er(NO3)6

Ternary Lithium Rare Earth Nitrates with Lonesome Nitrate Ions: Li₃[M(NO₃)₅](NO₃) (M = Gd? Lu, Y). The Crystal Structure of Li₃Er(NO₃)₆ Single crystals of the ternary nitrate Li₃Er(NO₃)₆ are obtained from a solution of “Er(NO₃)₃” in the melt of LiNO₃. In Li₃Er(NO₃)₆ (monoclinic, P2₁/n, Z = 4; a = 776.0(1); b = 748.86(8); c = 2 396(1) pm; β = 90.76(3)°; R1 = 0.0490; wR2 = 0.0792), Er³⁺ is surrounded by five bidentate nitrate ligands yielding the anionic units [Er(NO₃)₅]^2?. These are arranged in the direction of the 2₁ screw axis. Two lonesome NO₃^? ions are in the middle of such a “helix” and are connected by Li⁺ with the anions [Er(NO₃)₅]^2?. The helices are moved against each other by about half of the lattice constant a and are connected by further Li⁺ ions.