Purification of neutral protease by dye affinity chromatography

Twenty triazinic dyes were assayed as ligands for the chromatographic affinity purification of a neutral protease from Flavourzyme^™, a commercial preparation. Screening at pH 4.0 allowed the selection of eight dyes on the basis of their high protease adsorption. When the pH was set to 5.0 in order to increase selectivity, only Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A maintained protease adsorption at high values. Neither maximum capacities nor dissociation constants calculated from isotherms measured at 8 and 25°C showed great differences. By contrast, a strong temperature effect was evidenced in the elution step: elution at 8°C allowed 70, 81, and 98% recovery of adsorbed protease with Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A, respectively, whereas only 20% recovery was attained at 25°C. Based on the results obtained, a purification process for the neutral protease contained in Flavourzyme with Cibacron Blue F3G-A as the affinity ligand was developed, yielding 96% of electrophoretically pure enzyme in a single step, the specific activity rising from 850 to 3650 U/mg.     

贵金属Au冷却过程中结构及能量变化的分子动力学计算机模拟

通过分子动力学方法,研究了不同冷速下贵金属Au在温度2000～300K的冷却过程中微观结构的变化特点。结果发现,冷却速度对Au的微观结构产生重要影响。采用偶关联函数和键对分析技术对原子局域团簇结构进行分析,并考察了冷却过程中原子势能随温度的变化,比较了Au的微观结构转变与能量变化的对应关系,从能量转化的角度对冷却过程中Au的结构变化进行了说明。     

La-Fe-M(M=Al, Si)化合物磁热性能研究进展

介绍了La-Fe-M(M=AI,Si)化合物在磁热性能研究方面的最新进展。具有NaZn13型晶体结构,含高浓度Fe的La-Fe—M(M=AI,Si)化合物为良好的软磁材料;用少量的Co替代化合物中Si,Al元素可以将化合物的居里温度提高至室温;对La(Fe1-yCoy)xSi13-x化合物,适量的Si,Co组合可使化合物在室温产生可与Gd5Si2Ge2比拟的磁热效应;加入适量的间隙原子H,也可使La(FexSi1-x)13在室温的磁热性能远远大于金属Gd;对含Si量低及含Si量高的La(FexSi1-x)13化合物在相转变点附近由温度和磁场诱导相变的本质做了详细阐述。     

环氧氯丙烷作重原子微扰剂在环糊精诱导室温磷光法中的应用

本文报道一种新型的重原子微扰剂－环氧氯丙烷（ＥＣＨ）,在此重原子微扰下,建立了β－环糊精诱导室温磷光法（β－ＣＤ－ＲＴＰ）测定痕量溴代萘（ＢｒＮ）的方法,结果令人满意。同时还在该体系中测定了溴代萘的ＤＴＰ寿命、猝灭常数、三元包合物的包接常数。实验结果证明,α－ＢｒＮ／ＥＣＨ／β－ＣＤ三分子包接配合物比β－ＢｒＨ／ＥＣＨ／β－ＣＤ三分子包接络合物包接更加有效,而且稳定性更强。     

基于氦离子化气相色谱法测定微量氧、氮的影响因素

探讨氦离子化气相色谱法测定样品中微量氧、氮含量的影响因素。采用控制变量法,对色谱柱温度、进样流量、进样管道环境及极化电压等因素对微量氧、氮测定结果的影响进行讨论和分析。结果表明,当色谱柱温度为25~45℃时,色谱柱对氧、氮吸附量最小;当进样流量不小于70 mL/min时,微量氧、氮测定结果受外界干扰最小;当极化电压为80~160 V时,氧、氮具有最佳的响应值;初次测定样品中微量氧、氮含量时,需使进样管道表面吸附的氧、氮处于饱和状态,以便获得理想的测定结果。讨论的结果可为氦离子化气相色谱法测定相关样品中微量氧、氮含量时提供技术参考。     

硫鸟嘌呤修饰的Mn:ZnS QDs磷光探针检测铂(Ⅲ)

通过水相合成法制备了硫鸟嘌呤(TG)修饰的锰掺杂硫化锌量子点(TG-Mn:ZnS QDs)。加入Pt⁴⁺后,Pt⁴⁺会与硫鸟嘌呤上的氮原子结合形成N-Pt⁴⁺配位结构附着在TG-Mn:ZnS QDs的表面,随着Pt⁴⁺浓度的增加,TG-Mn:ZnS QDs-Pt⁴⁺体系发生电子转移而导致磷光逐渐被猝灭,基于此构建了检测Pt⁴⁺的磷光探针。实验中考察了p H、时间对Pt⁴⁺猝灭TG-Mn:ZnS QDs磷光强度的影响。在最佳实验条件下,Pt⁴⁺浓度在0.06~2.4μg/mL范围内与TG-Mn:ZnS QDs的磷光强度呈良好的线性关系y=0.0884x+0.2319,R²=0.991,方法检出限(3σ/n)为1.3μg/mL。该磷光探针适用于实际样品中Pt⁴⁺含量的测定。     

Teflon Magnetic Stirring Capsules (TMSC) as a Practical and Reusable Delivery System for Sensitive Reagents and Catalysts

The development of a user-friendly reusable laboratory equipment for the delivery of sensitive reagents and catalysts is described. The tightness of these Teflon Magnetic Stirring Capsules (TMSC) is ensured by the magnetic force and release of the reagent inside the solution is triggered by adjusting the stirring rate so that the centrifuge force exceeds the magnetic force. They can be loaded with several chemicals at the same time and do operate across a broad range of temperatures. The inertness of Teflon facilitates reaction purification.     

Bi4B2O9晶体及其熔体结构的高温原位拉曼光谱研究

利用密度泛函理论计算了Bi₄B₂O₉晶体的常温拉曼光谱, 并通过与实验拉曼光谱对比, 对其振动模式进行了归属. 利用高温原位拉曼光谱研究了Bi₄B₂O₉从常温到750 ℃升温过程中微结构的变化. 随着温度的升高, 晶体的平均键长变长, 键角分布变宽, 熔化后晶体中的BiO₄和BiO₅多面体解体, BO₃构型则保持三配位不变. 运用量子化学从头算法模拟了Bi₄B₂O₉的熔体结构并与实验拉曼光谱进行了对比分析, 发现在Bi₄B₂O₉熔体中B原子团簇为孤立的BO₃构型, Bi ³⁺游离于BO₃之间, 并结合未参与形成BO₃的O原子起到平衡电荷的作用.     

铂族金属催化剂低温 CO氧化研究近期进展

CO氧化可能是多相催化领域最常见的反应,它不仅能作为探针反应研究催化剂结构、反应活性位等,而且在诸多实际过程如空气净化、汽车尾气污染物控制、燃料电池所用氢源净化等扮演重要角色.最早的 CO氧化催化剂为霍加拉特剂,其组分主要为 CuO与 MnO2混合氧化物,然而在实际应用过程中存在低温活性低、吸湿易失活等缺点.1987年, Haruta等发现湿化学法制备的氧化物负载 Au催化剂表现出非常高的低温 CO氧化活性及耐水稳定性,其 Au粒子以纳米尺度分散,进而引发了催化研究领域的“淘金热”及纳米催化研究热潮.而 CO氧化通常作为考察 Au催化剂结构性质的探针反应,也成为考核其它金属催化剂是否具有高活性的判据之一. Pt族金属上 CO氧化反应从 Langmuir等研究开始至今已有100多年,然而低温下该金属催化剂活性与 Au催化剂相比要低一个数量级.本质原因为 Pt族金属上 CO吸附较强, O2吸附与活化受到抑制,而该步骤被认为是 CO氧化的速控步,因而表现出较低的催化活性.通常 Pt族金属催化剂需要100oC以上 CO才能脱附, O2进而得以吸附.目前研究人员采取多种策略,其基本原则为削弱 Pt族金属上 CO吸附强度或者提供其它活性位供 O2吸附与活化.本综述将概括近十年来Pt族金属催化剂 CO氧化研究进展,主要总结室温甚至超低温条件下的研究成果.高活性 CO氧化催化剂主要是通过采用可还原氧化物为载体或助剂,或者改变催化剂表面性质如使表面富 OH基物种来形成. Au催化剂的研究发现,改变金属粒子尺寸极有可能获得不同寻常的催化性能,而常规的 Pt族金属催化剂研究主要是在纳米尺度.近期人们发现逐渐减小 Pt族金属粒子尺寸,从纳米到亚纳米甚至单原子时,其电荷状态逐渐呈正价形式,这有利于削弱其 CO吸附强度.此外,可通过增强金属载体间的相互作用,改变金属载体接触方式,如从核壳到交叉结联结构,构筑出更多的金属载体界面,使得 O2更容易吸附与活化或稳定更多的 OH基物种进而在此界面与吸附的 CO反应.伴随着表征技术的发展, CO氧化机理的认识也更加深入,这给催化剂的设计带来更多新的思路.(1)改变 CO吸附活化位,将 CO吸附活化位从金属转移到载体上,从而大大降低 CO吸附强度,活化的 CO物种在反应过程中容易溢流到金属载体界面处,这甚至有利于超低温度下(–100oC左右) CO氧化.(2)改变 O2活化形式. O2通常在 Pt族金属上容易以解离氧原子形式存在,通过改变载体、金属载体界面性质使得 O2以分子氧形式活化,如形成超氧或过氧物种,这有利于降低 CO氧化的活化能垒,进而提高其低温甚至超低温下 CO氧化活性.今后,设计并合成出在超低温度下能够氧化 CO的 Pt族金属催化剂将成为 CO氧化催化剂研究的重要方向之一.     

Rapid determination of trace polycyclic aromatic hydrocarbons in particulate matter using accelerated solvent extraction followed by ultra high performance liquid chromatography with fluorescence detection

A method has been developed for the trace analysis of polycyclic aromatic hydrocarbons, which are known as persistent organic pollutants and ubiquitous constituents of fine particulate matter that causes growing airborne pollution. The method, which was especially for samples of airborne particulate matter less than 2.5 μm in diameter, utilized accelerated solvent extraction and ultra high performance liquid chromatography with fluorescence detector. Four principal parameters of accelerated solvent extraction were optimized to obtain maximum extraction efficiency. Using the established synergetic programs of gradient elution and fluorescence wavelength switching, a rapid separation was achieved in 6.56 min with good linearity for 15 polycyclic aromatic hydrocarbons (coefficient of determination above 0.999). The limits of detection ranged from 0.833 to 10.0 pg/m³. The precision of the method expressed as inter‐day relative standard deviation ranged from 0.2 to 1%, which was calculated from nine repetitive measurements of 8.00 μg/L analytes. Average spiked recoveries ranged from 71.6 to 97.7%, with the exception of naphthalene. The rapid, sensitive, and accurate method can meet the pressing needs of health risk assessment and increasingly heavy daily tasks of air quality monitoring.