不同温度均匀二半空间接触后产生的辐射场

 应用电磁线路中涨落耗散理论，推导了不同温度均匀二半空间接触后产生辐射场密度的公式。将此公式近似展开后，即得Grover和Urtiew所获得的表示式，不过多了一松弛项，该项如用非富里叶热传导理论推导，也是存在的。该结果和实验结果一致，不过这里的松驰时间可以应用介质性质进行计算。     

腔靶等离子体辐射温度空间分布测量

本文描述了用膜吸收法测量激光等离子体辐射温度空间分布的原理和方法给出了柱形缝靶轴向辐射温度随空间位置变化的特征,对测量结果进行了分析讨论。     

Cr^4＋：YAG,Cr^4＋：Mg2SiO4近红外荧光辐射温度特性研究

测量了Ｃｒ＾４＋，ＹＡＧ、Ｃｒ＾４＋，Ｍｇ２ＳｉＯ４晶体在室温和液氮温度下的荧光光谱，吸收光谱和激发态寿命，讨论了温度变化时，两种晶体中Ｃｒ＾４＋近红外辐射积分强度变化与激光发态寿命变化的关系，得出结论：在７７Ｋ￣３００Ｋ范围内，Ｃｒ＾４＋的＾３Ｔ２能级荧光辐射截面本身受温度影响不大，Ｃｒ＾４＋辐射荧光的变化，主要是由无辐射弛豫速率随温度变化而引起的。     

Study of hot bands in the B2Σ+u-X2Σ+g system of C-2 anion

Optical heterodyne magnetic rotation enhanced velocity modulation spectroscopy was employed to observe the visible absorption spectra of the B^2Σ^+_u-X^2Σ^+_g electronic transition of C^-_2. Four hot bands (0,1), (1,2), (2,3) and (3,4) have been observed and the band (3,4) is measured directly for the first time, so far as we know, by absorption. A rotational analysis was carried out to obtain molecular constants. With the Franck－Condon principle and the vibrational Boltzmann distribution, we have estimated the vibrational temperature of C^-_2 to be about 3000K.     

应变Si1-xGex层中p型杂质电离常温和低温特性

本文采用解析的方法计算了应变Si1-xGex层中p型杂质电离度与Ge组分x、温度T以及掺杂浓度N的关系.发现常温时,在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度的先变小,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加先变大,而后几乎不变;重掺杂时,杂质电离能变为0后,杂质电离度为1.低温下,轻掺杂时,载流子低温冻析效应较为明显,杂质的电离度普遍较小,当掺杂浓度大于Mott转换点时,载流子冻析效应不再明显,电离率迅速上升到1.在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度先变小,后变大,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加变大;重掺杂时,杂质电离能变为0后,杂质电离度为1.     

Thermal Effects of Microwave Energy in Agricultural Soil Radiation

The thermal treatment by millimeter waves for the soil disinfection can be one possible alternative to chemical treatments. This physical method is based on incrementing the soil temperature and its pathogens irradiating with high frequency electromagnetic waves. So the previous knowledge of the temperature distribution in the irradiated soil is essential for achieving an effective bad microorganism and weed seeds elimination. This report analyse the heating kinetic and spatial distribution of the maximum temperatures reached by the soil. It is presented a mathematic model about how are distributed the reached temperatures in the depth of the irradiated soil. This model concludes that when an orchard soil is irradiated superficially by microwaves, the microwaves have a big attenuation due to the soil dielectric properties and the water located in the pores of the most superficial layer. This fact causes a shield effect blocking the waves penetration in few centimetres. The heating by radiation is reduced to the superficial layer. The heating propagation in the depth is occurred by conduction following the Fourier equations.     

中高温工质在蒸发器中的换热模拟分析

本文采用分布参数的方法,建立了水源热泵中普遍采用的壳管式蒸发器稳态数学模型.通过中高温水源热泵试验台的实验数据同模拟计算结果的对比,验证了数学模型的准确性。应用此数学模型对中高温工质HTR01、HTR02及R134a在蒸发器典型制热运行工况,进行了模拟计算。得出了三种工质制冷剂侧换热系数沿管长的变化关系并对三种工质的换热性能进行了对比分析,为采用中高温工质的水源热泵换热器设计提供了参考依据.     

Phosphonate electrochemical recognition by molecularly imprinted deposited film

In this paper, thin films of titanium oxide imprinted with O,O-dimethyl-(2,4-dichlorophenoxyacetoxyl)(3′-nitrobenyl) methinephosphonate (Phi-NO₂) were prepared via liquid phase deposition (LPD) method on a glassy carbon electrode. The imprinted molecular in the films was removed by treatment with immersion in CH₂Cl₂. X-ray diffraction (XRD) and electrochemical methods were introduced to show the evidence of the molecular imprinting phenomenon. It was also found that the recognition ability of the sensor depended on the substituents associated with tridimensional structures of the nitro-compounds. Under the optimized condition, the sensor showed better sensitivity, selectivity and reproducibility to the imprinted molecule and the linear relationship between the current and the concentration of analyte in the range of 0.1-50 μM was obtained. LPD proved to be a powerful method for imprinting titanium oxide thin sense films.     

Excitation of plant growth in dormant temperature by steady magnetic field

Experimental results of applying a steady magnetic field (20 and 30 mT) on agricultural plants reveal that their growth is more than that of control plants. Considering that these plants have ferritin cells, and each ferritin cell has 4500 Fe atoms, it is obvious that they have an outstanding role in the plants’ growth. As the last spin magnetic moment (SMM) of the Fe atom posed to an external magnetic field (EMF), the composition of SMM and EMF create an oscillator in the system. Then we have a moment of force on ferritin cells. This oscillator exerts its energy, then damps and finally locates in the field direction. The relaxed energy increased the internal temperature (i.e., the effective temperature of the magnetic spin system of plant) so that it is situated in a proper temperature for growing. This phenomenon (temperature increasing) occurs in the initial minutes of applying the magnetic field. So it depends on the number of times of locating the plant in magnetic field in a day (n). If this number (n) passes the critical value, the plant reaches a burning temperature and growth is perturbed. In this paper, the plant growth rate and critical temperature in a steady magnetic field were investigated and formulated theoretically. An innovative result in this research is as follows: if a plant's environment was in the dormant temperature, we could increase the internal temperature of the plant by applying a magnetic field n times in a day (for growth).     

Low sintering temperature MnZn-ferrites for power applications in the frequency region of 400 kHz

In this paper, the effect of cubic zinc metaborate Zn₄O(BO₂)₆ on the sintering of MnZn-ferrites for medium frequency power applications is investigated. Zinc metaborate is synthesized in the laboratory using zinc oxide and boric acid as metal precursors. As observed, when zinc metaborate is added to the MnZn-ferrites at an optimum amount of 0.02 wt%, it significantly enhances densification and therefore allows, for a given density, reduction of the firing temperature by almost 200 °C. MnZn-ferrites exhibiting power losses of 70 mW/cm³ (measured at a frequency of 400 kHz, magnetic field 50 mT and temperature of 90 °C) are synthesized from conventionally milled powders with average particle diameter 0.6 μm, compacted and fired at 1100 °C. Identical experiments conducted under the same conditions on specimens without zinc metaborate additions revealed power losses greater than 300 mW/cm³, because of insufficient densification.