Methodology for the calculation of the potential of mean force for a cation-pi complex in water.

We report potential of mean force (PMF) calculations on the interaction between the p-sulfonatocalix[4]arene and a monovalent cation (Cs(+)). It has been recently shown from microcalorimetry and (133)Cs NMR experiments that the association with Cs(+) is governed by favourable cation-pi interactions and is characterized by the insertion of the cation into the cavity of the macrocycle. We show that the PMF calculation based upon a classical model is not able to reproduce both the thermodynamic properties of association and the insertion of the cation. In order to take into account the different contributions of the cation-pi interactions, we develop a new methodology consisting of changing the standard PMF by an additional contribution resulting from quantum calculations. The calculated thermodynamic properties of association are thus in line with the microcalorimetry and (133)Cs NMR experiments and the structure of the complex at the Gibbs free-energy minimum shows the insertion of the cation into the cavity of the calixarene.     

NO2气相硝化金刚烷的计算研究

运用密度泛函理论(DFT)和半经验MO-PM3方法研究了NO₂气相硝化金刚烷反应机理. 计算结果表明, NO₂不能直接取代金刚烷H; 在B3LYP/6-311＋＋G(3df,2pd)//B3LYP/6-31G* 较高水平下, 对三个可能机理的反应势垒(E_a)的精确计算表明, 该反应的决速步骤为NO₂中O和N进攻1-H的竞争过程, 且1-硝基金刚烷为主要产物. NO₂中O进攻1-H决速反应过程中, 分子几何、原子自然电荷及IR光谱变化表明, C—H键的断裂和N—H键的形成是一个协同过程; 参与新键形成和旧键断裂原子C(1), H(11), O(28), O(29)和N(27)的原子自然电荷及与其相关的键长、键角有明显的变化. 反应过程中体系偶极矩的变化表明, 极性溶剂能降低反应势垒, 有利于反应的进行.     

OUH体系的结构和分析势能函数

采用密度泛涵B3LYP方法优化出了OUH分子的各种结构，确定了最稳定构型和离解能，以及它们的谐性力常数，并导出双原子分子UH,UO的Murrell-Sorbie势能函数及其光谱数据。采用多体项展式方法，导出OUH(X^4A')基态分子的分析势能函数，获得OUH(X^4A')体系的势能面，考察了这个势能函数的基本性质，正确地复现出OUH分子的平衡结构特征，结果表明：U+OH,O+UH,H+UO的反应均为无阈能的放热能反应。为进一步探讨OUH体系的反应动力学过程打下了基础。     

分子力场进展

分子力学（简称ＭＭ）是近年来化学家常用的一种计算方法。与量子力学从头计算和半经验方法相比，用分子力学处理大分子可以大大节省计算时间，而且，在大多数情况下，用分子力学方法计算得到的分子几何构型参数与实验值之间的差值可在实验误差范围之内。所以，分子力学是研究生物化学体系的有效和可行的手段。分子力学的核心是分子力场。本文介绍了分子力场的量子力学背景、分子力场和光谱力场之间的关系。分子力场的一般形式、分力     

Investigation of the Electrochemical Reduction of Benzophenone in Aprotic Solvents Using the Method of Cyclic Voltammetry

The reduction of benzophenone (Bzph) in 3-pentanone (PEN), acetone (ACE), N,N-dimethylacetamide (DMA), N,N-dimethylformamide (DMF), tetrahydrofuran (THF), acetonitrile (ACN) and dimethyl sulfoxide (DMSO) with n-tetrabutylammonium hexafluorophosphate (TBAPF₆) as background electrolyte was studied using the technique of cyclic voltammetry at the temperature of 263.15 K. The half-wave potentials (E _1/2) were extracted. The reduction of Bzph occurs in two successive one-electron steps to produce first the free radical anion Bzph⁻ and then the dianion Bzph²⁻. The results indicated that the radical anion Bzph⁻ is reoxidized to Bzph in all investigated solvent media whereas the dianion Bzph²⁻ is reoxidized to Bzph⁻ only in THF. The heterogeneous electron-transfer rate constants (k _s ) were evaluated by employing the electrochemical rate equation proposed by Nicholson. The rate of electron transfer for the Bzph/Bzph⁻ couple was found to be relatively slow in all investigated solvent media. Consequently, the electron-transfer processes can be recognized as quasi-reversible. The diffusion coefficients (D) of Bzph in the investigated solvent media have been calculated using the modified Randles-Sevcik equation. The effect of the physical and chemical properties of the solvent medium on the electrochemical behavior of Bzph has been examined.     

Flow through Porous Media XVI: Electrokinetic Transport Coefficients of Aqueous Solutions of Mercuric Chloride and Glycine through a Sintered Disc Impregnated with a Cellulose Acetate Membrane under a Magnetic Field

The effect of the magnetic field on the electrokinetic transport coefficients (permeability coefficient and electro-osmotic permeability coefficient) of water and aqueous solutions of mercuric chloride and glycine through a sintered disc impregnated with cellulose acetate at different potentials, concentrations, and magnetic fields varying up to 21 kg/cm² are reported at 308.15 K. The phenomenological coefficients characterizing the electro-osmotic flow and the membrane characteristics are also estimated for the various solutions with the object of determining the efficiencies of electrokinetic energy conversion and ζ potential. The effect of magnetic field has been attributed to the molecular orientation of dipoles in solutions and to the change in the structure of the membrane.     

Electron beam pretreatment of sewage sludge before anaerobic digestion

The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately 30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation. A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation. Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k ₁ and k ₂). Most initial decay reaction accelerated within 10 d, with an average k ₁ of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient (k ₂) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron beam pretreatment could reduce the reactor solid retention time by half.     

Reverse permeation of sodium ions driven by pH difference across a liquid membrane: time dependencies of membrane resistance and membrane potential in a reverse permeation system

The diffusional flux of sodium ions across a liquid membrane was observed as a reverse permeation phenomenon: sodium ions were transported across the membrane against their own concentration difference. A supported liquid membrane having stearic acid as an ionic carrier was used. The internal aqueous phase contained NaCl and HCl and the external aqueous phase contained NaOH of the same initial concentration as NaCl in the internal aqueous phase. The reverse permeation occurred with a long time delay. During the delay, sodium ions flowed from the acidic to alkaline solution. The diffusion coefficient of sodium ion estimated from the flux equation taking into account the Donnan equilibrium at the interface was found to be much greater than that in the membrane solvent, 1-octanol. In the same membrane system as for the flux measurement, the membrane conductance and the membrane potential were measured as a function of time. The time dependence of the membrane potential in the presteady state showed a biphasic behavior. The initial rapid phase could be attributed to the change in the phase boundary potential and the subsequent slow step to the change in the diffusion potential within the membrane. Before the steady membrane potential had been reached, the reverse permeation of sodium ions against their own concentration difference was not observed. During the slow relaxation process of the membrane potential, the membrane resistance decreased to approach the steady state. Moreover, the oscillation of membrane potential abruptly started at a time in the slow step of the potential change and continued during the steady state. It was suggested that, at the presteady state, the increase in the amount of water in the membrane would drive a drastic change in the state of the liquid membrane in the filter pore, e.g. an inverted micellar structure making.     

STABILITY OF POLY（N,N＇-METHYLENEBISACRYLAMIDE-co-4-VINYLPYRIDINE） MICROGEL DISPERSION AND ADJUSTMENT OF THE HYDROPHOBICITY IN THE MICROGELS

In the UV-Vis spectra of pure light-scattering systems, there is an exponential relationship between absorbance and wavelength （A = Kλ^-n）. Here, the exponent n is named as flocculation-coagulation parameter. In the present paper, the effects of different additives on the stability of poly（N,N＇-methylenebisacrylamide-co-4-vinylpyridine） （poly（Bis-co-4-VP）） microgel dispersion were studied in detail via this parameter. The results showed that the stability of the dispersion mainly comes from the ionization of pyridine groups, making the microgel positively charged on its surface. This was confirmed by the measurement of Zeta potential and the result of conductometric titration. The result of fluorescence analysis indicated that the hydrophobicity in the microgels is enhanced with the increase in total 4-VP unit content.     

Coupling matrix element of electron self-exchange reactions in solution

On the basis of the common feature among the electron transfer process and the ion hydration process as well as the relevant experimental kinetic data of electron transfer reaction,a new accurate hydration potential function scheme for the determination of electron transfer coupling matrix element is presented.The coupling matrix element between two hydrated ions of the reacting system in solution is calculated.The results and the applicability of this scheme are discussed.