Simultaneous derivatization and air-assisted liquid–liquid microextraction of some aliphatic amines in different aqueous samples followed by gas chromatography-flame ionization detection

The paper presents a new method based on simultaneous derivatization and air-assisted liquid–liquid microextraction (AALLME) for the extraction and preconcentration of some aliphatic amines prior to gas chromatography-flame ionization detection (GC-FID). Primary aliphatic amines are derivatized and extracted simultaneously by a fast reaction with butylchloroformate (derivatization agent/extraction solvent) under mild conditions. The mixture of butylchloroformate and aqueous sample solution is rapidly sucked into a 10-mL glass syringe and then is injected into a test tube with conical bottom and the procedure is repeated seven times. After centrifuging the resulted cloudy solution, the derivatized analytes in the sedimented phase are determined by GC-FID. The influence of main factors on the efficiency of derivatization/extraction procedure is studied. Under the optimal conditions, the enrichment factors (EFs) for aliphatic amines are obtained in the range of 248–360 and limits of detection (LODs) are between 0.30 and 2.6 μg L⁻¹. The obtained extraction recoveries ranged from 50 to 72% and the relative standard deviation (RSD) was less than 4.8% for intra-day (n = 6) and inter-days (n = 4) precision. The method is successfully applied to determine some aliphatic amines in environmental water samples.     

Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach

The aim of this study was to find a satisfactory method to characterize the fatigue crack growth behavior of non-reinforced, semi-crystalline thermoplastic polymers using linear elastic fracture mechanics (LEFM). For this, crack growth curves (crack length versus cycle number) as well as crack growth kinetics curves (crack growth rate da/dN versus amplitude stress intensity factor ΔK) had to be generated. As methods suggested by ISO 15850 and ASTM E 647-11 failed to provide satisfactory results for the crack growth curves, a more advanced method was searched for and finally found in the literature. Regarding the crack growth kinetics curve, the idea of the calculation was based on methods recommended in ISO 15850 and ASTM E 647-11. However, these methods had to be considerably modified and improved in order to get accurate results with little scatter. The whole methodology was developed and verified with fatigue crack growth tests on two semi-crystalline thermoplastics (polyoxymethylene POM and polyetheretherketone PEEK).     

Morphological,thermal, and biodegradation properties of LLDPE/treated date palm waste composite buried in a soil environment

In this study, date palm waste that was naturally treated as a filler in a linear-low density polyethylene (LLDPE) matrix was recycled to prepare green composites. Two types of LLDPE, based on basic additives, were used. UV stabilizer and the slip and anti-block were added as basic additives. The objective of this study was to examine the effect of these basic additives and the treated filler on the biodegradation, morphological, and thermal properties of the prepared samples by a soil burial test. The samples were characterized by Fourier-transform infrared (FT-IR) spectroscopy and X-ray diffraction (XRD). Weight loss was calculated to investigate the biodegradation of the sample, and SEM and thermogravimetric analyses were performed to reveal the morphology and thermal properties before and after burial, respectively. Results showed that the presence of the bio-filler accelerated the biodegradation of the composites. The UV stabilizer had a positive impact on biodegradation factors whereas anti-block additives appeared resistant to biodegradable factors. The morphology and thermal stability of all the prepared samples changed after burial due to the effects of biodegradation during the burial.     

线性扫描极谱法测定微量肉桂酸

在 1mol·L-1HOAc NaOAc介质中 (pH =3.6 ) ,肉桂酸有一还原峰 ,其峰电位为 - 1.4 7V(vs.SCE)。峰电流与肉桂酸浓度在 2 .0× 10 -5～ 8.0× 10 -4 mol·L-1之间呈线性关系 (r =0 .9989) ,检出限为 1.0× 10 -5mol·L-1。该法应用于肉桂酸含量的测定 ,结果满意 ,并对肉桂酸的电化学性质进行了研究     

How anomalous are the anomalous properties of fluorine? Ionization energy and electron affinity revisited

It is well established that atomic fluorine has a miserly high ionization energy and avariciously high electron affinity. Yet, as was shown some 30 years ago, the latter value is anomalously low-linear extrapolation shows the value to be some 110 kJ/mol less than expected by comparison to the heavier halogens. Related literature investigation extended this anomaly to nitrogen and oxygen and their (valence) isoelectronic congeners. We extend it to related cationic species and thereby the noble gases and alkali metals, and the aforementioned species are better understood. We thus ask if the ionization energy/electron affinity anomaly of fluorine remains an anomaly.     

Selective cleavage of the linear ether bond in benzyl glycidyl ether and triphenylmethyl glycidyl ether by potassium alkalide as two-electron-transfer reagent

The linear ether bond was exclusively cleaved in benzyl glycidyl ether and triphenylmethyl glycidyl ether under the influence of K⁻, K⁺(15-crown-5)₂ (1), whereas the strongly strained three-membered oxacyclic ring remained undisturbed. Potassium glycidoxide and benzylpotassium were found as the primary reaction products of benzyl glycidyl ether with 1. Subsequently, benzylpotassium reacted with benzyl glycidyl ether giving the next potassium glycidoxide molecule and bibenzyl. Benzyl phenyl ether was used as a model compound to explain the mechanism of bibenzyl formation. The reaction of triphenylmethyl glycidyl ether with 1 resulted in potassium glycidoxide and stable triphenylmethylpotassium. After treating with a quenching agent a new glycidyl ether or glycidyl ester was obtained from potassium glycidoxide. These results were found when the reaction occurred at the excess of glycidyl ether. In another case, i.e. at the excess of 1 further reactions took place with the participation of potassium anions and various new compounds were observed in the reaction mixture after benzylation or methylation. Thus, the method of substrates delivery influences the course of studied processes in a decisive way.     

Comparison of octadecyl-bonded silica and styrene-divinylbenzene copolymer sorbents for trace enrichment purposes fundamental aspects II. Linear chromatographic behaviour of the extracting supports

Summary Two reversed-phase LC systems were investigated by frontal analysis for the determination of linear chromatographic conditions, as defined according to the isotherm concept. The Partisil ODS-3 bonded silica and the PRP-1 polystyrene-divinylbenzene resin were used as stationary phases together withtrans-2-hexen-al as test solute and methanol-water mixtures as mobile phases. Particular attention was paid to the respective influence of the two main parameters which may cause sorbent overloading, that is, the capacity factor (k′) and the solute concentration in the mobile phase (C_m). Provided that k′C_m≤10⁻² M, linear chromatographic behaviour was observed for both sorbents, the maximum capacities of which were found greater than 1mmolg⁻¹.     

Multivariate analysis of non-homogeneous peaks in liquid chromatography

Summary The effects of concentration, separation and spectral similarity as factors influencing the accuracy of iterative target testing factor analysis (ITT-FA) are investigated for three component systems by the application of analysis of variance (ANOVAR). ANOVAR is applied over a range of peak separations to map the changing effects of the three factors with increasing overlap. Two error responses were measured and analysed, (a) Relative cluster error (RCE) a measure of the error over all peaks in a cluster and (b) Relative peak error (RPE) the error of an individual peak. Multicomponent analysis (MCA) a method requiringa priori spectral information, is used as a referee method for ITT-FA.     

Kristallstruktur und Konformation eines linearen Pentapyrrols

The crystal structure of the pentapyrrin1 was determined by X-ray diffraction methodes at two temperatures (298K and 97K). It is the first structure determination of a linear polypyrrole with more than four pyrrole rings. In the crystal, the molecule is located on a crystallographic two-fold axis, which passes through the central pyrrole ring. It assumes a helical overall-conformation, which is stabilized by intramolecular hydrogen bonding. The acidic proton at the nitrogen atom of the central pyrrolic ring is disordered, being observed with half occupancy at two symmetry-equivalent positions off the crystallographic diad. Attempts to remove the disorder by cooling to 97K were unsuccessful, since no indication for a phase transition was detected.