Investigation of nu(N-H) and nu(C-N) stretching modes of propylamine (C3H7NH2) in a binary system C3H7NH2 + CH3OH via concentration dependent Raman study and ab initio calculations

Raman spectra of propylamine (C3H7NH2) and its binary mixtures, C3H7NH2 + CH3OH with varying mole fractions of the reference system, C3H7NH2, C were recorded in two widely apart wavenumber regions, 3100-3600 cm(-1) and 1225-1325 cm(-1). In the former region, the two Raman bands at approximately 3305 and approximately 3326 cm(-1), obtained after the line shape analysis, which were assigned to symmetric nu(N-H) and anti-symmetric nu(N-H) stretching modes, respectively, show a downshift upon dilution. However, whereas the nu(N-H) anti-symmetric mode shows a shift of 18.6 cm(-1), the nu(N-H) symmetric mode shows a much smaller shift (5.7 cm(-1)) between neat liquid and high dilution, C = 0.1. This aspect has been explained using the optimized geometries calculated employing ab initio theory (MP2 level) for the neat C3H7NH2 and its different hydrogen-bonded complexes. The linewidth versus concentration plot for the nu(N-H) anti-symmetric stretching mode, however exhibits a distinct maxima at C = 0.4, which has been explained as a slight departure from the concentration fluctuation model. In the latter region, a symmetric peak is observed, which corresponds to nu(C-N) stretching mode, which shows an upshift upon dilution and an almost linear concentration dependence. This has also been explained in terms of the parameters obtained from the optimized geometries of the different hydrogen-bonded complexes.     

基于光谱曲线形态的高光谱影像检索方法研究

随着传感器技术、数据通讯技术的飞速发展,利用各种机载和星载传感器,己经获取到各种不同的海量遥感影像数据。巨大的数据量带来了数据存储和管理的问题,如何实现从海量影像数据中检索出我们所需要的信息显得十分迫切。影像检索最早由Chang于1980年提出,是对传统信息检索的扩展。针对海量遥感影像高效检索的需求和高光谱遥感影像波段数目多的特点,分析了影像检索中的影像距离函数和相似性度量问题,基于经典的曲线简化Douglas-Peucke算法(简称DP算法)提取光谱曲线的形态特征,利用“提取特征”的思想,提出了基于DP算法的光谱曲线和影像检索(简称DPSR)方法,将光谱形态特征应用于影像检索当中。DPSR利用光谱曲线上的特征点,减小了计算量,实现了有效地匹配和检索,适合高光谱遥感影像的光谱检索。文章选择了OMISI高光谱数据的四种易混分地类进行了相似性度量的对比实验。通过与常规的分析方法光谱角匹配(SAM)、光谱信息散度(SID)的对比可以看到,DPSR在较少计算量的情况下能保持较高的计算精度,提供了一种新的影像光谱高效检索方法。此外,文章还提出了尚待进一步研究的问题。     

形状记忆聚合物表面弹性薄膜的屈曲研究1)

形状记忆聚合物具有形状变化后在特定条件下可恢复的特点,因此作为一种柔性基底材料在柔性电子中得到广泛应用。对于形状记忆聚合物基底和弹性薄膜组成的双层结构,当 基底收缩时,其表面的弹性薄膜可以形成屈曲波形。针对基底收缩过程中波形的变化, 本文实验测得形状记忆聚合物材料在不同温度下的 属性,结合一维应变恢复函数,利用柔性基底表面薄膜屈曲波形参数(波幅、波长等)表达式,求解得到了在基底收缩的过程中,弹性薄膜屈曲波形的变化规律,和实验结果吻合很好。     

考虑收缩徐变影响的新旧混凝土叠合梁单元刚度矩阵改进

混凝土自身的收缩徐变会在新旧混凝土叠合梁中使应力重分布.为了计算重分布应力,首先推导以挠度表达的叠合梁非线性微分方程,然后通过求解该微分方程,引入位移形函数、刚度形函数和等效节点载荷形函数,最后得出新混凝土梁、旧混凝土梁和Goodman弹性夹层三合一的叠合梁改进型单元刚度矩阵和等效节点载荷,从而为收缩徐变影响下的混凝土的内力计算提供了一种有效的新方法.文中还进行了实例验证分析,并从中得出了一些有益的结论.     

利用ICP-AES中钙的主次灵敏线同时测定各种盐湖卤水中的钙

等离子发射光谱（ICP-AES）已广泛应用于医学,地质,水质,环境等领域的检测。本文利用钙的主、次灵敏线同时测定盐湖卤水及盐水中各种不同含量的钙,其加标回收率在94.0%—100.8%范围内,与经典的容量法对比,数据能满足要求,样品浓度小于100mg/L时用灵敏线Ca317.9nm测定,样品浓度大于100mg/L时用次灵敏线Ca210.3nm测定。此法快速、准确,结果令人满意。     

Crosslinking network structure governing particle shape and size distribution by one-step emulsion polymerization in the presence of particle coagulation

In this study, sub-200?nm, crosslinked latex particles with a narrow particle size distribution were prepared by one-step emulsion polymerization in the presence of particle coagulation. The relationship between the particle shape and particle coagulation was investigated by varying the time of crosslinking network structure formation and particle coagulation. Particles with irregular shapes such as doublet, triplet, and ellipsoid were obtained using divinylbenzene (DVB) and ethylene glycol dimethacrylate (EGDMA) as the crosslinking agents, because the crosslinking network structure of particles was formed before the particle coagulation. In contrast, latex particles with a uniform spherical shape were also prepared using triallyl isocyanurate (TAIC) or dihydrodicyclopentadienyl acrylate (DCPA) as the crosslinking agents by delaying the time of crosslinking network structure formation. Alternatively, uniform spherical latex particles were prepared by bringing forward the particle coagulation time using cationic initiator, 2, 2′-azobis (2-methylpropionamidine) dihydrochloride (AAPH). This study presents a new idea that would further broaden the application of particle coagulation in emulsion polymerization.     

Understanding the effect of filler shape induced immobilized rubber on the interfacial and mechanical strength of rubber composites

Styrene butadiene rubber (SBR) composites with silica, halloysite nanotubes (HNTs) and montmorillonite (MMT) were prepared and the interfacial and mechanical properties were compared to understand the reinforcing behaviours of these fillers based on the results of SEM, DSC, DMA, etc. Due to the formation of interparticle domain, HNTs immobilized more rubber approaching their surface than silica and MMT. Interestingly, only tightly immobilized rubber chains made contribution to the enhancement of interfacial and mechanical strength of SBR composites. This was because the tightly immobilized rubber acted as a bridge in the filler-rubber interface and induced the formation of stretched rubber chains linked filler network when the composites were loaded in tension, while loosely immobilized rubber were easy to slip off from filler surface, causing the separation between filler and bulk rubber. Therefore, silica with more tightly immobilized rubber approaching its surface showed better reinforcing effect on rubber than HNTs and MMT.     

CO oxidation over ceria supported Au22 nanoclusters: Shape effect of the support

CO oxidation over ceria-supported Au₂₂ nanoclusters shows strong dependence on the support shape: the lattice oxygen in CeO₂ rods is more reactive than in the cubes and thus make rods a superior support for Au nanoclusters in catalyzing low temperature CO oxidation.     

An evaluation method for measuring SPL and mode shape of tire cavity resonance by using multi-microphone system

This paper presents an evaluation method for measuring the sound pressure level and mode shapes of tire cavity resonance by using a multi-microphone system. Two commercial tires were evaluated to compare abilities of noise suppression by means of this method in the range of the first resonance from 200 to 260 Hz. One tire was a special tire that suppresses tire cavity resonance with polyurethane foam mounted on the tire’s inner liner. The other tire was a normal tire with no polyurethane foam. The mode shape change from vertical to horizontal direction in both tires. However, the sound pressure level of the special tire was lower than the normal tire at all frequencies.