Laser ablation synthesis of monodispersed magnetic alloy nanoparticles

Monodispersed CoPt alloy nanoparticles were synthesized by a pulsed laser ablation (PLA) technique coupled with a low-pressure operating differential mobility analyzer (LP-DMA). The CoPt alloy nanoparticles were generated by laser ablating a solid Co–Pt target. In CoPt alloy nanoparticles synthesized from a target with a Co composition of 75 at%, the nanoparticle surfaces were covered by an oxide layer and exhibited a core-shell structure. In contrast, no shell was observed in particles generated from a target with a Co:Pt ratio of 50:50 at%. According to an EDX analysis, the compositions of the individual nanoparticles were almost the same as that of the target material. Finally, the magnetic hysteresis loops of the CoPt alloy nanoparticles exhibited ferromagnetism.     

氢同位素化合物TiH2，TiD2和TiT2的电子

根据原子分子反应静力学和群论，确定TiH2，TiD2和TjT2的基电子状态为^3A2．应用基函数6-311G^＊＊和密度泛函理论B3P86方法，全电子计算了氢同位素分子及其钛化物的能量E、定容热容Cv和熵S应用电子振动近似理论，即用单个分子TiH2，TiD2和TjT2中的电子和振动能量和熵近似代表他们处于固态时的能量和熵,计算所得到的金属钛的氢化热力学函数△Hc^0，△S^0，△G^0以及平衡压力与温度的关系，与文献符合很好，这表明电子振动近似理论的可应用性，选用金属钛作为中子靶是很正确的。     

Uncertainties in measured and modelled asymmetry parameters of mineral dust aerosols

The error caused by the uncertainty in the refractive index in the determination of the asymmetry parameter g is studied for a variety of mineral dust aerosol samples at two different optical wavelengths. Lorenz–Mie computations for spherical model particles are compared with results based on laboratory-measured phase functions in conjunction with a commonly used extrapolation method. The difference between the g-value based on measurements and the g-value based on Lorenz–Mie simulations is generally on the same order of magnitude as the error caused by the uncertainty in the refractive index m. For larger effective radii the error in g related to the use of spherical model particles is even larger than that related to the uncertainty in m. This indicates that the use of spherical model particles can be among the major error sources in the determination of the asymmetry parameter of dust aerosols.     

Influence of Bipartite Qubit Coupling on Geometric Phase

The geometric phase of the bipartite Heisenberg spin-1/2 system with one spin driven by rotating magnetic field is investigated. It is found that in the one-site drive case, the intersubsystem coupling can be equivalent to a static quasi-magnetic field in the parameter space. This perspective has satisfactorily explained the irregular asymptote effect of geometric phase. We discuss the property of the two-site magnetic drive spin system and discover that a stationary state with no geometric phase shift is generated.     

宽绝对禁带的一维磁性光子晶体结构

提出了一种具有宽绝对禁带的一维磁性光子晶体结构,该结构由相同的折射率和物理厚度以及不同的波阻抗的两种磁性材料交替组合而成.通过传输矩阵法分析可得,相比于非磁性光子晶体,该光子晶体的禁带对入射角和偏振都不敏感,从而具有更宽的绝对禁带.合适地调节两种磁性材料的参数,增加两者波阻抗的差值,该光子晶体的绝对禁带宽度也相应地增加;调节两种磁性材料的物理厚度,其绝对禁带中心也会随之调整;最后,将两个满足上述条件的一维磁性光子晶体组成异质结构,其第一禁带宽度与禁带中心之间的比值可达到1.41以上.     

~(87)Rb玻色-爱因斯坦凝聚体的快速实验制备

采用二维磁光阱产生了-个快速~(87)Rb原子流,并在高真空的三维磁光阱中实现了~(87)Rb原子的快速俘获,进一步采用射频蒸发冷却技术实现了原子云的预冷却,然后将原子转移到远失谐的光学偶极阱中蒸发得到了玻色-爱因斯坦凝聚体.实验上可以在25 s内完成三维磁光阱的装载(约1.0×10~(10)个~(87)Rb原子),然后经过16 s的冷却过程最终在光学偶极阱中获得5.0×10~5个原子的玻色-爱因斯坦凝聚体.实验重点研究了二维磁光阱的优化设计和采用蓝失谐大功率光束对四极磁阱零点的堵塞,抑制四极磁阱中原子的马约拉纳损耗,更加有效地对原子云进行预冷却.     

三角形石墨烯量子点阵列的磁电子学特性和磁输运性质

基于密度泛函理论的第一性原理计算方法,研究了三角形石墨烯纳米片用不同连接方式拼接而成的四种一维量子点阵列(1D QDAs)的磁电子学性质和磁输运性质.结合能计算表明所有1D QDAs是非常稳定的.特别是研究发现1D QDAs的电子和磁性质不仅依赖于磁性态,也明显依赖于连接方式,如在无磁态时,不同量子点阵列(QDAs)可为金属或窄带隙半导体.在铁磁态时,不同QDAs能为半金属(half-metal)或带隙不同的双极化磁性半导体.而在反铁磁态时,不同QDAs为带隙不等的半导体.这些结果意味着连接方式对有效调控纳米结构电子和磁性质扮演重要的角色.1D QDAs呈现的半金属或双极化磁性半导体性质对于发展磁器件是非常重要的,而这些性质未曾在本征石墨烯纳米带中出现.同时,我们也研究了一种阵列的磁器件特性,发现其拥有完美的(100%)单或双自旋过滤效应,尤其是呈现超过109%的巨磁阻效应.     

Fe_3O_4单晶薄膜磁性电场调控的微磁学仿真研究

磁性薄膜磁学特性电场调控的相关研究对开发新型低功耗磁信息器件具有突出意义.本文基于电场调控磁性的基本理论,以OOMMF(Object Oriented Micro-Magnetic Frame)微磁学仿真软件为工具,研究了电场对生长于PZN-PT单晶衬底上Fe_3O_4单晶薄膜磁学特性的调控.研究结果显示:无外加电场时,薄膜表现出典型的软磁特性;沿衬底[001]方向施加的外加电场可以使得薄膜矫顽力、矩形比等磁学特性发生显著改变:当外加磁场沿[100]([010])时,施加正值(负值)电场强度可以显著增大薄膜的矫顽力与矩形比,当电场强度不小于0.6 MV/m时薄膜矩形比达到1.这是因为外加电场导致薄膜产生单轴应力各向异性,使得薄膜的等效磁各向异性发生了从无外电场下的面内四重磁晶各向异性向高电场下的近似单轴磁各向异性的过渡.外加1 MV/m与-1 MV/m的电场时等效易磁化轴分别沿[100]与[010]方向.另外,外加1 MV/m(-1 MV/m)的电场强度可以使得铁磁共振的频率增大(减小)接近1 GHz.     

多量子比特核磁共振体系的实验操控技术

随着量子信息与量子计算科学的发展,量子信息处理器被广泛地用于量子计算、量子模拟、量子度量等方面的研究.为了能在实验上实现这些日益复杂的方案,将量子计算机的潜能转化成现实,需要不断提高可操控的量子体系比特位数,实现更复杂的量子操控.核磁共振自旋体系作为一个优秀的量子实验测试平台,提供了丰富而又精密的量子操控手段.近几年来在此平台上进行了不少的多量子比特实验,发展并积累了一系列的多量子比特实验技术.本文首先阐述了核磁共振体系多量子比特实验中的实验困难,然后结合7量子比特标记赝纯态制备以及其他有关实验,对多比特实验过程中应用到的实验技术进行介绍.最后对核磁共振体系多量子比特实验技术方向的进一步研究进行了总结和展望.     

Preparation,characterization, and performance study of beeswax/expanded graphite composite as thermal storage material

In this study, beeswax as a new energy storage material and its composite with expanded graphite were prepared and characterized for their surface and thermal properties. Surface characterization showed no chemical interaction between beeswax and expanded graphite. The thermal conductivity of the composite was improved with 117% enhancement. The thermal performance of beeswax and its composite as a heat storage material was studied in a rectangular shell-and-tube thermal storage unit. The melting point of the composite remained almost same as that of beeswax; however, the melting time was reduced considerably, from 540 to 360 min with inlet water at 80°C and a 2-lpm flow rate.