A multicommuted stop-flow system employing LEDs-based photometer for the sequential determination of anionic and cationic surfactants in water

It has been developed an automatic stop-flow procedure for sequential photometric determination of anionic and cationic surfactants in a same sample of water. The flow system was based on multicommutation process that was designed employing two solenoid micro-pumps and six solenoid pinch valves, which under microcomputer control carry out fluid propelling and reagent solutions handling. A homemade photometer using a photodiode as detector and two light emitting diodes (LEDs) with emission at 470 nm (blue) and 650 nm (red) as radiation sources, which was tailored to allow the determination of anionic and cationic surfactants in waters. The procedure for anionic surfactant determination was based on the substitution reaction of methyl orange (MO) by the anionic surfactant sodium dodecylbenzene sulfonate (DBS) to form an ion-pair with the cetyl pyridine chloride (CPC). Features such as a linear response ranging from 0.35 to 10.5 mg L⁻¹ DBS (R = 0.999), a detection limit of 0.06 mg L⁻¹ DBS and a relative standard deviation of 0.6% (n = 11) were achieved. For cationic surfactant determination, the procedure was based on the ternary complex formation between cationic surfactant, Fe(III) and chromazurol S (CAS) using CPC as reference standard solution. A linear response range between 0.34 and 10.2 mg L⁻¹ CPC (R = 0.999), a detection limit of 0.05 mg L⁻¹ CPC and a relative standard deviation of 0.5% (n = 11) were obtained. In both cases, the sampling throughput was 60 determinations per hour. Reagents consumption of 7.8 μg MO, 8.2 μg CPC, 37.2 μg CAS and 21.6 μg Fe(III) per determination were achieved. Analyzing river water samples and applying t-test between the results found and those obtained using reference procedures for both surfactant types provide no significant differences at 95% confidence level.     

适用小分子化合物MALDI分析的基质研究

基质辅助激光解吸电离技术（matrix assisted laser desorption/ionization,MALDI）是20世纪80年代发展起来的一种应用于质谱分析的电离化技术。MALDI技术在生物大分子的分析和检测方面获得了良好的应用。由于受有机基质分子的干扰,MALDI在小分子化合物分析方面的应用受到很大的限制。近年来为解决这一问题,一些用于MALDI分析的新型材料被设计和开发出来。这些新型材料主要包括：碳、硅、纳米金属等无机材料和新型有机分子等。除此之外,在传统基质中添加表面活性剂和对分析物衍生化等方法也被成功应用于小分子化合物的MALDI质谱分析中。本文对这些可应用于小分子化合物分析的新型MALDI基质进行了综述和展望。     

电感耦合等离子体原子发射光谱(ICP-AES)法测定锡精矿中8种杂质元素

应用电感耦合等离子体原子发射光谱(ICP-AES)法同时测定锡精矿中钙、镁、铜、铅、锌、砷、锑、铋8种杂质元素。对锡精矿样品的分解方法进行了合理选择,并对测定时的元素分析谱线、基体及各测定元素间干扰情况等进行了讨论。采用硝酸、盐酸、氢氟酸、高氯酸溶样,盐酸浸取。基体效应较小,各待测元素之间基本无干扰。测定结果与国家标准方法比对结果基本一致,相对标准偏差为1.3%~3.3%(n=11),方法加标回收率为96.0%~105%,能满足实际工作中准确、高效地分析锡精矿中杂质元素的需要。     

Improved Calcium Ion-Selective Electrode Based on a Neutral Carrier

Abstract

The performance of a liquid-membrane electrode using a synthetic, neutral carrier in o-nitro-phenyl-n-octyl-ether as membrane component in a PVC matrix, in the presence of sodium tetra-phenyl-borate, is described. Selectivities, working range, lifetime and anion interference are discussed. The electrode makes possible the measurement of calcium ion activities in the range 10^?1M to 10^?6M in unbuffered and in the range 10^?1M to 10^?8M in calcium buffered systems respectively. The selectivities of calcium over protons, magnesium, sodium and zinc are 25,000, 26,000, 2,800 and 7,100, respectively, and are far superior than those reported for other calcium sensors.     

锥光干涉法表征偶氮苯侧链液晶聚合物的光致取向

采用偏光显微镜在平行光和锥光条件下对液晶聚合物膜内分子的取向排列状态进行了研究,不同取向状态的膜由线偏振光或圆偏振光照射偶氮苯侧链液晶聚合物得到。结果表明,液晶聚合物膜采用线偏振光照射时,偶氮苯介晶基元沿面排列,形成单相畴面内取向态。该取向态的锥光干涉图为位于视场中心的粗黑十字,旋转载物台小于10°,该干涉图即完全退出...     

磁致伸缩系数的测量

为了避免非平衡电桥法测量磁致伸缩系数出现的漂移现象，本文提出了一种用光学干涉法间接测量磁致伸缩系数的实验方法。     

钠光源的特性在牛顿环实验中的反映

本文详细分析了牛顿环实验中巧妙地利用了钠光源相于长度短，且为双线，面光源，这一特殊机制。     

ICP—AES法中稀土元素间的相互干扰研究

稀土元素的谱线较复杂,相互间存在着不同程度的干扰。本文着重研究了ＩＣＰ－ＡＥＳ法中,它们间的干扰情况,并用几种校正方法进行了比较。     

Computer Simulation of a 3-D Sensing System with Structured Illumination

A computer simulation system of three-dimensional sensing with structured illumination is presented. It includes the generation of deformed fringe patterns from 3-D shapes and the reconstruction of 3-D shapes, conversely. Some experimental results of the deformed fringe pattern and the reconstructed object shapes are presented. We have also discussed the effect of some major system parameters on the measurement results and considered how to correct these parameters according to the measurement result of the standard plane. Using this simulation system, the major system parameters: environmental conditions, measurement accuracy and algorithm evaluation of the 3-D shape measurement system based on PMP, FTP, SPM, etc., can be researched. © 1997 Elsevier Science Ltd. All rights reserved.     

激光干涉法测量弹性模量

从光的干涉原理出发，讨论了金属丝弹性模量的光电测量方法．设计了激光干涉法测量长度微变量的测量装置，并介绍了测量原理，给出了动镜移动方向判别电路．