锂金属电池用高浓度电解液体系研究进展

锂金属二次电池具有极高的能量密度,是下一代储能电池的研究热点。然而,金属锂负极在传统碳酸酯电解液1 mol·L^?1 LiPF6-EC/DEC(ethylene carbonate/diethyl carbonate)中充放电时,存在严重的枝晶生长和循环效率低下等问题,阻碍了其商业化应用。因此,开发与锂负极兼容的新型电解液体系是目前重要的研究任务。与传统稀溶液相比,高浓度电解液体系具有独有的物化性质和优异的界面相容性,并且能有效抑制锂枝晶生长、显著提升锂负极的循环可逆性,因而格外受到关注。本文综述了高浓度电解液及局部高浓电解液体系的最新研究进展,分析了其溶液化学结构和物化性质,对其与锂负极的界面相容性、枝晶抑制效果、效率提升能力及界面稳定性机制进行了探讨;文章着重介绍了高浓与局部高浓电解液体系在锂金属二次电池中的应用,同时从基础科学研究和应用研究两个层面对高浓电解液和局部高浓电解液存在的主要问题进行了简要分析,并对其未来发展方向进行了展望。     

水溶液法原位构建ZnO亲锂层稳定锂-石榴石电解质界面

固态电池以其高安全性和高能量密度而备受关注。石榴石型固体电解质(LLZO)由于具有较高的离子导电性和对锂金属的稳定性,在固态电池中具有应用前景,但陶瓷与锂金属较差的界面接触会导致高的界面阻抗和可能形成的枝晶穿透。我们利用LLZO表层独特的H⁺/Li⁺交换反应,提出了一种简便有效的金属盐类水溶液诱发策略,在电解质表面原位构建ZnO亲锂层,界面处LiZn合金化实现紧密连续的接触。引入改性层后,界面阻抗可显著降低至约10Ω·cm²,对称电池能够在0.1mA·cm^-2的电流密度下实现长达1000h的长循环稳定性。匹配正极LiFePO₄(LFP)或LiNi_0.5Co_0.2Mn_0.3O₂(NCM523)的准固态电池在室温下能够稳定循环100次以上。     

石榴石固体电解质Li3BO3界面改性研究

石榴石固体电解质由于其高的离子电导率,对锂金属稳定等优点成为了下一代高性能锂电池的重要研究方向之一.但锂金属负极界面浸润性与锂枝晶问题限制了其应用.本文通过简单的液相沉积结合高温烧结的方法,在石榴石固体电解质片表面构建了一层稳定的硼酸三锂(Li3BO3)修饰层.研究表明,Li3BO3 修饰层可以有效改善石榴石固体电解质...     

锂金属负极亲锂骨架的研究进展

随着电动汽车和便携式电子产品的快速发展, 人们对于高比能二次电池的需求越来越迫切. 锂金属以其极高的理论比容量和极低的电极电势被视为下一代高比能电池理想负极材料之一. 但是, 锂枝晶的生长及体积膨胀等问题限制了金属锂负极的实际应用. 在金属锂负极中引入三维骨架可以有效抑制锂枝晶生长, 缓解体积膨胀. 其中亲锂骨架可以降低锂的形核能垒, 诱导锂的均匀成核, 更加有效地调控锂沉积行为. 本文结合国内外的研究进展总结了锂金属负极中亲锂骨架的研究成果. 根据亲锂材料的不同对亲锂骨架进行了分类, 总结了各类亲锂骨架在调控锂沉积行为和提高电池性能方面取得的成果, 并对其今后的研究和发展进行了展望.     

ANiN(A=Li,Na,Mg,Ca)的结构、热力学、弹性和电子性质的第一性原理研究

三元过渡金属氮化物ANiN(A=Li,Na,Mg,Ca)是潜在的可充放电池的电极材料.物理性质,比如热稳定性、电子能隙以及弹性稳定性等,对于这些材料的电池应用都是非常重要的.本文使用第一原理方法,对比研究了 ANiN这些材料的结构、动力学、弹性和电子结构性质.对状态方程和声子谱的计算被用来确定体系的稳定结构.对最稳定结...     

Facile fabrication and characterization of polyimide nanofiber reinforced photocured hybrid electrolyte for Li‐ion batteries

In this study, a novel ion conductive polyimide (PI) nanofiber reinforced photocured hybrid electrolyte has been fabricated. Polyimide fibers were fabricated with the reaction between 4,4′‐oxydianiline (ODA) and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA) followed by electrospinning and thermal imidization methods. Then, PI electrospun fibers were dipped into hybrid resin formulation containing bisphenol A ethoxylate dimethacrylate (BEMA), poly (ethylene glycol) methyl ether methacrylate (PEGMA) and 3‐(methacryloyloxy) propyltrimethoxysilane (MEMO) and then photocured to prepare PI nanofiber reinforced electrolyte membrane. Photocured membranes were soaked into lithium hexafluorophosphate (LiPF₆) before measuring electrochemical stability and ionic conductivity of hybrid polyelectrolyte. The chemical structure and electrochemical performance of the electrolytes were examined by Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), electrochemical impedance spectroscopy (EIS), linear sweep voltammetry (LSV) and scanning electron microscopy (SEM) analysis. The incorporation of MEMO into organic matrix effectively increased the modulus from 2.83 to 5.91 MPa. The obtained results showed that a suitable electrolyte for Li‐ion batteries with high lithium uptake ratio, high conductivity (7.2 × 10^?3 S cm^?1) at ambient temperature and wide stability window above 5.5 V had been prepared. Copyright © 2017 John Wiley & Sons, Ltd.     

Li2B4O7坩埚内预氧化熔融铸片XRF法测定含还原物耐火材料中主量和次量组分

在四硼酸锂坩埚中,以碳酸锂和硝酸铵为氧化剂,在铂金坩埚外对含还原物耐火材料进行预氧化和烧结。在高温氧化过程中,由于样品表面包裹有含氧化剂为主的烧结物,在继续熔融氧化产生的气体浮力作用下,样品在未被氧化前,不与铂金坩埚接触。因此,避免了熔融过程中铂金坩埚腐蚀问题。实验结果表明,氧化温度控制在730℃以下,时间15min内,含还原物耐火材料样品与氧化剂发生氧化烧结反应,四硼酸锂坩埚不会熔穿。确定的预氧化温度为720℃,时间为5~15min。结合现有的报道,确定了熔融铸片所需氧化剂和脱模剂的用量、熔融温度和时间。按拟定的方法,用国家和行业标准样品绘制工作曲线,对含还原物耐火材料样品进行了测定。与湿法分析结果进行比较表明,准确度与湿法分析相当。     

The Formation of Surface Lithium–Iron Ternary Hydride and its Function on Catalytic Ammonia Synthesis at Low Temperatures

Lithium hydride (LiH) has a strong effect on iron leading to an approximately 3 orders of magnitude increase in catalytic ammonia synthesis. The existence of lithium–iron ternary hydride species at the surface/interface of the catalyst were identified and characterized for the first time by gas‐phase optical spectroscopy coupled with mass spectrometry and quantum chemical calculations. The ternary hydride species may serve as centers that readily activate and hydrogenate dinitrogen, forming Fe‐(NH₂)‐Li and LiNH₂ moieties—possibly through a redox reaction of dinitrogen and hydridic hydrogen (LiH) that is mediated by iron—showing distinct differences from ammonia formation mediated by conventional iron or ruthenium‐based catalysts. Hydrogen‐associated activation and conversion of dinitrogen are discussed.     

Protection of Li metal anode by surface-coating of PVDF thin film to enhance the cycling performance of Li batteries

The PVDF thin film on the surface of the lithium metal can highly suppress the lithium dendrites.     

Li_(3.22)Na_(0.569)Mn_(5.78)O_(12.0)的电化学性能

以L iOH.H2O和Mn(CH3COO)2.2H2O作原料,应用微波-固相两段烧结法合成具有L i4Mn5O12结构特征,组成为L i3.22Na0.569Mn5.78O12.0的锂离子电池正极材料.XRD分析表明,在380℃的后处理温度下,微波烧结前处理有利于生成纯L i4Mn5O12尖晶石相.充放电实验表明,在4.5~2.5V电压区间,新制样品的初始放电容量为132 mAh.g-1,100循环的容量衰减率为6.8%;4个月存放样的初始放电容量为122 mAh.g-1,100循环的容量衰减率为17.4%.表现出较好的充放电性能和循环寿命.微波烧结使样品的Mn-O键被加强.