Trace lead measurement and on-line removal of matrix interference in seawater by isotope dilution coupled with flow injection and ICP-MS

Isotope dilution analysis method coupled with flow injection and inductively coupled plasma mass spectrometry (ID-FI-ICP-MS), enabled trace lead concentration in seawater to be determined and the high salt concentration in the matrix, such as Na⁺, Ca²⁺ and Mg²⁺, to be removed on-line. The operational parameters of the FI system including pH for the chelating reaction, concentration of 8-hydroxyquinoline-5-sulfonic acid (8-HQS), sample loading time and injection speed, washing time and speed, eluting acid concentration and eluting speed, and instrumental parameters for ICP-MS were optimized and selected. Accurate results could be achieved because the isotope ratios required can be precisely measured in the range of the eluting peak by means of ID-FI-ICP-MS. The 3σ detection limit was 0.204 ng ml⁻¹. The trace lead concentration of seawater in south Xiamen, China was 0.988 ± 0.039 ng ml⁻¹. The recoveries of spiked Pb standard in seawater and standard reference water (GBW 08607) were 97.9 and 101.0%, respectively, with a relative standard deviation of 0.98%. This method can be used to determine trace lead concentration in high salt matrix samples, and is especially useful when the eluting peaks do not have a Gaussian-distribution.     

Synthesis and Spectroscopic Characterization of New Lead(II) Thiosaccharinates. Molecular Structure of Bis(thiosaccharinato)tetrakis(pyridine)dilead(II) and Thiosaccharinato‐bis(1,10‐phenantroline)lead(II) Thiosaccharinate

Four new lead(II) thiosaccharinate complexes: [Pb(tsac)₂H₂O] (1) (tsac: thiosaccharinate anion), [Pb₂(tsac)₄(py)₄] (2) (py: pyridine), [Pb(tsac)(o‐phen)₂](tsac)·CH₃CN (3) (o‐phen: 1,10‐phenantroline), and [Pb(tsac)₂(bipy)] (4) (bipy: 2,2′‐bipyridine) were prepared. The infrared and electronic spectra as well as the thermal analysis of all the compounds were recorded and discussed. The thiosaccharinate anion acts in three different coordination forms, one of then reported for the first time. The crystal structures of complexes 2 and 3 have been determined by single crystal X‐ray diffractometry. In complex 2 , two monomeric moieties are joined together forming a symmetric bis‐μ‐sulphur bridged dimer by interaction of two lead(II) atoms through the exocyclic sulphur atoms of two thiosaccharinate ligands. The seven‐fold coordination sphere of each lead atom is completed by two pyridine nitrogen atoms and by another sulfur and two nitrogen atoms of the thiosaccharinate anions. In complex 3 , the lead(II) atom is coordinated by four nitrogen atoms of two 1,10‐phenantroline molecules and by the sulfur and nitrogen atoms of one thiosaccharinate ion. The second anion has an electrostatic interaction with the nucleus.     

Determination of lead in seawater by inductively coupled plasma optical emission spectrometry after separation and pre-concentration with cocrystallized naphthalene alizarin

An analytical method for separation and pre-concentration of lead in seawater for determination by inductively coupled plasma optical emission spectrometry has been investigated. Lead was retained in the solid phase (0.5 g) composed of co-precipitated naphthalene and alizarin red. The solid phase quantitatively sorbs Pb(II) at pH 8–9, and the metal was eluted using 5.0 ml of 2 mol l⁻¹ nitric acid. The effect of NaCl, KCl, BaCl₂, CaCl₂, Na₂SO₄, MgCl₂ and Na₃PO₄ on the sorption of Pb(II) in the solid phase was studied. A set of solutions containing varying amounts of electrolytes (0.5; 1.0; 3.0 and 5.0% m/v) with Pb (50 μg) was prepared and the recommended procedure applied. The Na₃PO₄ was found to interfere; the other electrolytes did not interfere up to 5% m/v. A pre-concentration factor of 40 was obtained in this analytical procedure. The limit of detection and limit of quantification for Pb(II) were 53 and 176 μg l⁻¹, respectively. Lead was determined in seawater samples collected in Salvador city, Bahia, Brazil. The precision, expressed as R.S.D., was 1.8–4.6%, and the recovery of lead added to seawater samples was 95–97%.     

Exploiting flow injection and sequential injection anodic stripping voltammetric systems for simultaneous determination of some metals

Flow injection (FI) and sequential injection (SI) systems with anodic stripping voltammetric detection have been exploited for simultaneous determination of some metals. A pre-plated mercury film on a glassy carbon disc electrode was used as a working electrode in both systems. The same film can be repeatedly applied for at least 50 analysis cycles, thus reducing the mercury consumption and waste. A single line FI voltammetric system using an acetate buffer as a carrier and an electrolyte solution was employed. An injected standard/sample zone was mixed with the buffer in a mixing coil before entering a flow cell. Metal ions were deposited on the working electrode by applying a potential of −1.1 V vs Ag/AgCl reference electrode. The stripping was performed by anodically scanning potential of working electrode to +0.25 V, resulting a voltammogram. Effects of acetate buffer concentration, flow rate and sample volume were investigated. Under the selected condition, detection limits of 1 μg l⁻¹ for Cd(II), 18 μg l⁻¹ for Cu(II), 2 μg l⁻¹ for Pb(II) and 17 μg l⁻¹ for Zn(II) with precisions of 2–5% (n=11) were obtained. The SI voltammetric system was similar to the FI system and using an acetate buffer as a carrier solution. The SI system was operated by a PC via in-house written software and employing an autotitrator as a syringe pump. Standard/sample was aspirated and the zone was then sent to a flow cell for measurement. Detection limits for Cd(II), Cu(II), Pb(II) and Zn(II) were 6, 3, 10 and 470 μg l⁻¹, respectively. Applications to water samples were demonstrated. A homemade UV-digester was used for removing organic matters in the wastewater samples prior to analysis by the proposed voltammetric systems.     

Lead-selective membrane electrodes based on dithiophenediazacrown ether derivatives

Three double-armed diazacrown ethers with two thiophene side groups, 7,16-dithenyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTDC), 7,16-dithenoyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTODC), and 7,16-di-(2-thiopheneacetyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTAODC), have been synthesized and used as novel neutral lead(II) ionophores in ion selective electrode applications. The relationship between the molecular structure of these ionophores and electrochemical properties (linear range, response time, selectivity) of the membrane electrode is discussed. The optimum conditions for the preparation of the electrodes are described. The optimized dithenoyldiazacrown had a detection limit of pPb = 5.7, and Nernstian range with slope 29.2 mV decade⁻¹ from pPb = 5.0 to 2.7. Mercury and silver ions are the major interferences. These electrodes are applied to potentiometric titrations of lead(II) ions and show promise for the determination of lead ions in water samples.     

生物,环境样品和食品中铅的痕量分析

主要根据近七年来发表的有关论文，综述了我国生物、环境样品和食品中铅和痕量分析技术进展，内容包括分子光谱、原子光谱、电化学和其他分析方法，以及联用技术和前处理等方面，收集文献３９３篇。     

Interactions of Pb(II) with particles of a polluted river

Pb(II) interactions with the surface of suspended matter from a polluted river was studied using differential pulse anodic stripping voltammetry (DPASV) technique. Three sampling sites were selected and studies have been done with samples collected in different times of the year (winter, autumn and summer). The values have been compared with those obtained in spring in the same conditions [Sci. Total Environ. 151 (1994) 101].Particles were separated by centrifugation and suspensions of the freeze-dried particles were titrated with Pb(II), being measured the labile metal fraction by DPASV. For comparison, suspensions of river water without any separation have also been titrated.Results show that surface metal complexes are inert, within the time scale of the analytical technique and desorbed organics from surfaces, form labile Pb(II) complexes in solution. For each sample it was determined the capacity for Pb complexation of particles and desorbed organics and the differential function has been estimated. Despite the heterogeneity of ligands, the systems interpreted in a discontinuous way, present one or two kinds of dominant ligands with Pb affinity.     

Tunable UV generation at 283 nm by frequency doubling and sum frequency mixing of two semiconductor lasers for the detection of Pb

High resolution atomic absorption measurements of lead at 283 nm in a vapor cell were performed by frequency doubling an 850 nm laser diode to obtain 425 nm light, followed by sum frequency generation of the harmonic radiation with a second 850 nm laser diode.     

Novel coated-graphite membrane sensor based on N,N′-dimethylcyanodiaza-18-crown-6 for the determination of ultra-trace amounts of lead

A novel selective membrane electrode for determination of ultra-trace amount of lead was prepared. The PVC membrane containing N,N′-dimethylcyanodiaza-18-cown-6 (DMCDA18C6) directly coated on a graphite electrode, exhibits a Nernstian response for Pb²⁺ ions over a very wide concentration range (from 1.0×10⁻² to 1.0×10⁻⁷ M) with a limit of detection of 7.0×10⁻⁸ M (∼14.5 ppb). It has a fast response time of ∼10 s and can be used for at least 2 months without any major deviation in potential. The electrode revealed very good selectivity with respect to all common alkali, alkaline earth, transition and heavy metal ions. The proposed sensor was used as an indicator electrode in potentiometric titration of lead ions and in determination of lead in edible oil, human hair and water samples. The proposed sensor was found to be superior to the best Pb²⁺-selective electrodes reported in terms of detection limit and selectivity coefficient.     

Synthesis and Crystal Structure of a Novel Polymeric Lead(II) Compound: [Pb2(phen)2(N3)3(ClO4)]n

A 2D lead(II) coordination polymer [Pb₂(phen)₂(N₃)₃(ClO₄)]_n,( 1 ) containing 1,10‐phenanthroline (phen) and two different anions, has been synthesized and characterized by elemental analysis, IR and ¹H NMR spectroscopy and X‐ray crystallography. The single‐crystal X‐ray data show two different kinds of Pb²⁺ ions with coordination numbers of eight, Pb1 = PbN₆O₂ and Pb2 = PbN₈, with hemidirected and holodirected structures, respectively. The supramolecular features in 1 is negiotated through the weak but directional C‐H···O and C‐H···N interactions and aromatic π–π stacking interactions.