Spectroscopic and quantum chemical studies on the structure of 2-arylquinoline-4(1H)-thione derivatives

The geometries of the title compounds were probed in solution, solid and gas states using spectroscopic methods, X-ray crystallography and quantum chemical techniques. The exclusive existence of the NH-4-thiones in solution (NMR and PCM-B3LYP(MP2)/6-31+G(d) calculations) and solid state (FT-IR and X-ray) is also corroborated by comparison of their spectroscopic data with those of the corresponding 2-aryl-1-methylquinoline-4(1H)-thione derivatives. The co-existence of the quinoline-4-thione and quinoline-4-thiol (4-mercaptoquinoline) isomers in the gas phase is confirmed by mass spectrometry and the preponderance of the 4-thiol is supported by quantum chemical techniques (PM3, MP2 and B3LYP).     

Ion chromatographic separation of hydrogen ion and other common mono- and divalent cations

We introduced an approach to the ion chromatographic determination of common mono- and divalent cations including hydrogen ion and demonstrated the ability of a C30 column dynamically coated first with dodecylsulfate and then with 18-crown-6 ether to separate the cations by ion-exchange mechanism. Using an ethylenediamine solution containing a small concentration of 18-crown-6 ether and lithium dodecylsulfate at pH 6.2 as eluent, the cations were eluted in the order Li < Na+ < NH4+ < H+ < K+ < Mg2+ < Ca2+ with symmetrical peaks. The conductivity vs. concentration plots were linear about three orders of magnitude, from millimolar to micromolar; and the detection limits were all < 0.6 microM. Rainwater was analyzed directly using this ion chromatographic system with satisfactory results.     

A study of the mechanisms involved in the separation of metal ions with a mixed-bed stationary phase

Summary The optimization of chromatographic methods for the determination of metal species require an understanding of the mechanisms involved. In this work, the separation of Cd, Co, Cu, Fe(II/III), Mn, Pb and Zn using a mixed bed column (IonPac CS5A) and a cation-exchange column (IonPac CS2) is studied as a function of mobile phase composition. The type and concentration of complexing agent and of ionic strength modificators were evaluated. The charge of analytes were calculated using the classical ion exchange approach to highlight the effect of eluent composition on retention. The comparative study enabled us to identify an optimal eluent composition for the separation of the nine metal species.     

LC and LC-MS Separation of Peptides on Macrocyclic Glycopeptide Stationary Phases: Diastereomeric Series and Large Peptides

Previous work on the LC separation of peptides had shown that macrocyclic glycopeptide stationary phases to be selective for peptides of five to thirteen amino acids in length. In this work, the selectivity of the teicoplanin stationary phase is compared to that of a C18 stationary phase for seven diastereomeric enkephalin peptides. The teicoplanin stationary phase separated all seven diastereomeric enkephalin peptides in a single chromatographic run. The insertion of d-amino acids into the primary enkephalin sequence produced areas of hydrophobicity that influenced retention order on the C18 stationary phase. However, analogous trends are not observed on the teicoplanin stationary phase, which is more polar and structurally diverse. Optimization of the mobile phase and the use of a step-gradient for the enkephalin separation on the teicoplanin stationary phase is discussed. Also, the selectivity of macrocyclic glycopeptide stationary phases for peptides of 14, 28, 30, and 36 amino acids also is investigated and compared to separation on a C18 stationary phase. A method for eluting peptides with multiple basic amino acids, which tend to be strongly retained on the macrocyclic glycopeptide stationary phases, is presented.     

On the mechanism of solute retention in RP-HPLC systems with B+AB1+AB2 type eluents

Summary Intermolecular interactions between the solute and the moieties constituting the mobile phase significantly contribute to the overall retention pattern of a given solute in a given chromatographic system. In this paper retention of solute is discussed in the case of the B+AB₁+AB₂ type mobile phase, which, in a quasithermodynamic way, can be divided into seven individual moieties. One evaluates the influence of each moiety on solute retention, and refers these regularities to the polarity of the solutes.     

Effect of pressure on retention factors in HPLC using a non-porous stationary phase

Summary Pressure and temperature have significant influence on retention in HPLC. This study investigates the effect of pressure and temperature on the retention behavior of aromatic hydrocarbons (toluene, ethyl benzene, butyl benzene, pentyl benzene) and polar, acidic and basic samples (phenol, acetophenone, N,N-dimethyl aniline, benzophenone) on a reversed phase column. The effect has been studied on non-porous, tetradecyl (C₁₄) coated silica particles. We found that the adsorption-induced decrease of the partial molar volume of the solutes investigated was between ΔV _m =5–15 cm³ mol⁻¹. The increment of the decrease of the partial molar volume due to the addition of one CH₂ group, for the homologous series of the aromatic hydrocarbons is approximately ΔV _CH2 =2.3 cm³mol⁻¹. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001.     

New (1R,4R)-2-arylidene-p-menthan-3-ones with a bridging ester group in the arylidene fragment. Synthesis and behavior in liquid-crystalline systems

(1R,4R)-2-(4-Hydroxybenzylidene)- and (1R,4R)-2-(4"-hydroxybiphenyl-4-yl)methylene-p-menthan-3-ones were synthesized by condensation of (–)-menthone with O-tetrahydropyran-2-yl derivatives of 4-hydroxybenzaldehyde and 4"-hydroxy-4-formylbiphenyl, respectively, in a DMSO—base medium followed by the removal of the protective group. The reactions of these hydroxy derivatives with 4-alkylbenzoic, 4-alkyloxybenzoic, trans-4-alkylcyclohexane-4-carboxylic, and 4"-alkylbiphenyl-4-carboxylic acids afforded three series of new chiral esters. Compounds containing the arylidene moiety with three benzene rings were found to exhibit liquid-crystalline properties. The characteristic features of these compounds are discussed based on the results of studies by polarizing microscopy, differential scanning calorimetry, and small-angle X-ray scattering. It was found that the mesomorphic compounds under study can form a smectic A mesophase, twist grain boundary mesophases (TGBA), and blue phases in a wide temperature range. Upon dissolution of certain of chiral compounds in 4"-cyano-4-pentylbiphenyl, a rather high twisting power and the thermal stabilizing effect on mesophases were observed.     

Arsenidostannate mit Arsen-analogen [SnAs]-Schichten: Darstellung und Struktur von Na[Sn2As2], Na0,3Ca0,7[Sn2As2], Na0,6Sr0,6[Sn2As2], Na0,6Ba0,4[Sn2As2] und K0,3Sr0,7[Sn2As2]

Arsenidostannates with [SnAs] Nets Isostructural to Grey Arsenic: Synthesis and Crystal Structure of Na[Sn₂As₂], Na_0.3Ca_0.7[Sn₂As₂], Na_0.4Sr_0.6[Sn₂As₂], Na_0.6Ba_0.4[Sn₂As₂], and K_0.3Sr_0.7[Sn₂As₂] The metallic lustrous compounds Na[Sn₂As₂], Na_0.3Ca_0.7[Sn₂As₂], Na_0.4Sr_0.6[Sn₂As₂], Na_0.6Ba_0.4[Sn₂As₂] and K_0.3Sr_0.7[Sn₂As₂] were prepared from melts of mixtures of the elements. The compounds crystallize in the trigonal system (space group R3 m, No. 166, Z = 3) with lattice constants see in “Inhaltsübersicht”. The structures are isotypic to Sr[Sn₂As₂] containing puckered [SnAs] nets which are stacked with a sequence of six layers. The E(I)/E(II) atoms are located between each second [SnAs] layer in trigonal antiprismatic interstices formed by As atoms. In the resulting [Sn₂As₂] double layers the _∞²[SnAs] nets are stacked in such a way that additional Sn—Sn contacts arise.     

Effect of temperature on the mechanism of retention of fullerenes in liquid chromatography using various alkyl bonded stationary phases

Summary The temperature-dependency of the separation of fullerenes in liquid chromatography (LC) has been examined using various alkyl bonded stationary phases. It has been found that a maximum retention temperature exists with long alkyl bonded stationary phases, whereas there is no similar effect with the newly synthesized alkyl bonded phases which have two phenyl groups at the base of the bonded phase. The interpretation of the retention behavior of fullerenes in the low temperature region on alkyl bonded stationary phases is discussed using information obtained by CP-MAS solid-state NMR spectroscopy and LC.     

High temperature gas chromatography: The development of new aluminum clad flexible fused silica glass capillary columns coated with thermostable nonpolar phases: Part 1

With the simultaneous development of blank aluminum clad flexible fused silica glass capillary tubing capable of withstanding temperatures up to 500°C, coincident with a series of special high temperature methyl polysiloxane polymers, it was possible to produce for the first time, long lived fused silica capillary columns containing thin films of thermostable stationary phases which could be maintained isothermally at 400425°C and temperature programmed to 425–440°C. The “bleed rate” here for a well conditioned column was 5 picoamperes or less. Under these circumstances, alkanes with carbon numbers in the C-90 to C-100 area were rapidly and efficiently eluted from these columns. By extrapolation here, one can easily detect certain compounds with boiling points in the 750°C range. Since this type of capillary column was found to possess certain favorable properties, it was thought that it will soon replace the packed column and will probably be more popular than the borosilicate capillary column for many high temperature applications. Moreover, evidence has now accumulated which leads us to further believe that the majority of analyses of “high molecular weight” compounds performed by Supercritical Fluid Chromatography (SFC), utilizing very narrow bore fused silica capillary columns at several hundred atmospheres, can be much more simply, much more rapidly, much more economically, and much more efficiently accomplished by gas chromatography utilizing this new generation of high temperature capillary columns.