A triphenylamine based multi-analyte chemosensor for Hg and Cu ions in MeCN/H2O

A novel triphenylamine based oxidative chemosensor TOC was synthesized. The chromogenic and fluorogenic behaviors of TOC towards Hg²⁺ and Cu²⁺ ions in a binary mixture of MeCN/H₂O (9/1) were dramatically different. TOC displays colorimetric ‘naked eye’ recognition of Hg²⁺ and fluorogenic ‘turn on’ response towards Cu²⁺ via a unique cyclization reaction using two different detection modes. Moreover, TOCAZOL obtained from the oxidative cyclization reaction of TOC with Cu(ClO₄)₂ can be used as a selective fluorescent sensor toward Hg²⁺ ion.     

A turn on ESIPT probe for rapid and ratiometric fluorogenic detection of homocysteine and cysteine in water with live cell-imaging

5(Benzothiazol-2-yl)-4-hydroxyisophthalaldehyde (BHI), an intense ESIPT containing molecule in mixed media loses its properties due to resonance-assisted H-bond (RAHB) in absolute water. Due to resonance-assisted H-bond the o-aldehyde is more reactive than the other one. With addition of cysteine/homocysteine into this solution the o-aldehyde group gets transformed into thiazolidine/thiazine ring, respectively, and the phenolic proton becomes free enough for transfer to nitrogen of the benzothiazole ring in excited state, that is, the ESIPT of BHI is turned on. Thus we can detect cysteine/homocysteine in water as well as in live cells.     

Vitamin B6 cofactor derived chemosensor for the selective colorimetric detection of acetate anions

A novel vitamin B₆ cofactor derived anion sensor L for the selective colorimetric detection of acetate has been developed by the condensation of pyridoxal and 2-aminothiophenol. The sensor L showed a noteworthy change in the visible region of the spectrum and was detected by the ‘naked-eye’ for both acetate and fluoride anions in DMSO but selectively for acetate in DMSO/H₂O (88:12, v/v). The anion recognition ability of L was investigated by spectroscopic (UV–vis and ¹H NMR) and DFT methods.     

A novel voltammetric sensor for ascorbic acid based on molecularly imprinted poly(o-phenylenediamine-co-o-aminophenol)

A molecularly imprinted copolymer, poly(o-phenylenediamine-co-o-aminophenol) (PoPDoAP), was prepared as a new ascorbic acid (AA) sensor. The copolymer was synthesized by incorporation of AA as template molecules during the electrochemical copolymerization of o-phenylenediamine and o-aminophenol, and complementary sites were formed after the copolymer was electrochemically reduced in ammonium aqueous solution. The molecularly imprinted copolymer sensor exhibited a high sensitivity and selectivity toward AA. Differential pulse voltammograms (DPVs) showed a linear concentration range of AA from 0.1 to 10 mM, and the detection limit was calculated to be 36.4 μM. Compared to conventional polyaniline-based AA sensors, the analytical performance of the imprinted copolymer sensor was improved due to the broadened usable pH range of PoPDoAP (from pH 1.0 to pH 8.0). The sensor also exhibited a good reproducibility and stability. And it has been successfully applied in the determination of AA in real samples, including vitamin C tablet and orange juices, with satisfactory results.     

The physical properties of pressure sensitive rubber composites

Nitrile butadiene rubber, NBR, structural foam of different apparent densities was obtained by using different concentrations of foaming agent, azodicarbonamide, ADC/K. The true stress-strain characteristics, in case of compression, of foamed samples after the application of cyclic stress-strain were measured. The effect of the cyclic stress-strain on strain energy density of ADC/K foaming agent-filled NBR rubber composites was studied. The mechanical parameters were found to depend on the foaming agent concentration and on the pre-cyclic fatigue number. Results also indicated that the strain energy decreased with filler concentration.The effects of the cyclic stress-strain on the conductivity of ADC/K foaming agent-filled NBR rubber composites were studied. The electrical properties were found to depend on the foaming agent concentration, the strain amplitude and the number of stress-strain cycles of pre-strain. This study was assisted by the current-voltage characteristics which were measured under the effect of different compression ratios: 0%, 5%, 10%, 15%, 20%, 25% and 30%. The free current carrier mobility and the equilibrium concentration of charge carriers in the conduction band were produced as functions of compressive strain. Results also indicate that there is a linear variation between pressure and conductivity for all samples, which means that these samples can be used as a pressure sensor.     

基于苯并噻唑Zn2+荧光探针及其细胞造影应用

设计合成基于苯并噻唑Zn²⁺荧光增强型探针BHP,在HEPES缓冲液中测其对Zn²⁺识别性能。实验结果表明,BHP对Zn²⁺有较高的选择性,对其他金属离子如Cd²⁺,Fe²⁺,Ni²⁺,Pb²⁺,Hg²⁺,Al³⁺,Mn²⁺,Ag⁺,Cu²⁺,Co²⁺,Na⁺,K⁺,Mg²⁺和Ca²⁺无明显荧光增强响应。BHP与Zn²⁺按1：1计量比配位,在生理条件下荧光强度不受pH值影响。在HeLa细胞中对Zn²⁺的造影表明BHP可用于生物体Zn²⁺检测。     

“门控制”效应分子印迹传感器测定绿麦隆

在氧化铂电极表面采用化学聚合法制得绿麦隆分子印迹膜传感器。利用"门控制"中"门"的数量变化控制催化性能的强弱,结合氧化铂对过氧化氢的催化放大效应,有效的提高了传感器的灵敏度并建立了对环境中绿麦隆残留的检测方法。研究了氧化铂电极对过氧化氢的催化效果,并对分子印迹膜聚合配比、过氧化氢浓度、洗脱时间、重吸附时间进行优化。在优化条件下,绿麦隆浓度在1.0×10^-88.0×10^-6mol/L范围内与氧化铂电极对过氧化氢的催化电流呈负相关性,检出限为5.4×10^-9moL/L。该传感器成功应用于农田水样的检测,其回收率为98.5%¹02.0%。     

基于聚谷氨酸修饰玻碳电极的甲基对硫磷电化学传感器

制备了一种简单的聚谷氨酸修饰玻碳电极的用于检测甲基对硫磷的电化学传感器。 并应用循环伏安法研究了甲基对硫磷在该修饰电极上的氧化还原行为;甲基对硫磷的浓度检测采用差分脉冲伏安法,结果表明,甲基对硫磷在5.0×10-7～7.5×10-4 mol/L浓度范围与响应电流有良好的线性关系。 甲基对硫磷检测限（S/N=3）可达1.0×10-9 mol/L。 该法制备的传感器有望应用于实际样品中的甲基对硫磷的检测。     

基于荧光共轭聚合物的金属离子传感研究

设计合成了一系列结构相似的共轭主链含5%苯并噻二唑结构单元及侧链带胺类金属离子螯合基团的阴离子型水溶性共轭聚合物PFA, PFBTA和PFBTNA, 并对它们在不同极性溶剂中的光物理性质进行了研究. 利用分子主链含适量苯并噻二唑共聚单元的聚芴衍生物聚集态不同荧光光谱及颜色发生显著变化这一特性, 研究了这一系列水溶性聚芴衍生物在水/甲醇(9/1)溶液中对金属离子的荧光响应过程. 结果表明, 金属离子不仅能通过能量及电荷转移猝灭聚合物荧光, 还可以通过静电相互作用力使聚合物聚集态发生改变, 进而影响聚合物的光学性质. 同时分子链上引入金属离子螯合基团能够显著提高体系的检测灵敏度, 聚合物PFBTA和PFBTNA可以特异性识别Cu²⁺离子, 并且可做为其它金属离子的广谱型比色法检测材料.     

A Superacid-catalyzed Synthesis of Fluorescent Covalent Triazine Based Framework Containing Perylene Tetraanhydride Bisimide for Sensing to O-nitrophenol with Ultrahigh Sensitivity

Abstract

A mesoporous covalent triazine framework, PCPDI, was synthesized via an aromatic nitrile trimerization reaction of N,N′-di(4-cyanphenyl)- 3,4,9,10-tetracarboxydiimide (CPDI) by CF₃SO₃H catalyzed at 40?°C and this method avoids the use of noble metal catalyzers or high temperature reaction. PCPDI exhibits high thermal stability and strong fluorescence. The PCPDI shows ultrahigh sensitivity to tracing o-nitrophenol in chloroform with K_SV constant of 1.74?×?10⁵ L mol^?1 and detection limit (LOD) of 1.72?×?10^?11?mol L^?1.