钽内标X射线荧光光谱法测定钨精矿中WO_3

提出了以钽为内标波长色散X射线荧光光谱法测定钨精矿中WO3的新方法。以Na2B4O7和Li2B4O7(质量比65:35)的混合物作为熔剂,Ta2O5为内标,同时加入LiNO3为氧化剂,在1200℃下进行熔融制样,最后将本方法应用于实际样品的分析,结果表明,以钽作为内标测定WO3,不仅可以在很大程度上降低实验操作和仪器测量带来的偏差,也可以消除基体效应的影响。方法用于测定白钨精矿和黑钨精矿中WO3,其准确度和精密度优于重量分析法。     

Cr(Ⅵ)与牛血清白蛋白的相互作用

采用荧光光谱、紫外光谱、CD光谱法研究了K2Cr2O7与牛血清白蛋白(BSA)的相互作用。实验结果表明,铬(Ⅵ)使BSA的紫外吸收降低,峰位红移,表明铬(Ⅵ)与BSA发生较强的相互作用;铬(Ⅵ)酸根离子与BSA形成基态复合物导致BSA内源荧光猝灭,猝灭机理主要为静态猝灭。测定了不同温度下该反应的热力学参数,ΔGθ0,ΔHθ和ΔSθ分别为-12.60kJ/mol和56.60J/(mol.k),表明上述作用过程是一个熵增加、自由能降低的自发分子间作用过程,铬(Ⅵ)酸根离子与BSA之间以静电作用力为主;非辐射能量转移机理确定了铬(Ⅵ)与牛血清白蛋白中色氨酸残基之间的距离r=2.85nm;同步荧光和CD光谱研究表明,铬(Ⅵ)使BSA的二级结构发生改变,α-螺旋含量降低,色氨酸残基所处微环境的极性减小。     

盐酸提取-液相色谱-原子荧光联用技术检测水产品中甲基汞等汞化合物

建立了HCl提取,高效液相色谱与原子荧光联用技术测定水产中无机汞、甲基汞、乙基汞形态的分析方法。对前处理方法和液相色谱的最佳参数进行优化,实验表明,3种汞化合物的线性范围为0~100μg/L,相关系数(r)均优于0.9990,检出限在0.3~0.6μg/L之间,汞化合物各形态的RSD均小于5%,加标回收率在78.8%~116.8%之间,标准物质(GBW10029),(GBW09101B)中汞形态的测定值均在标准值范围内,参加甲基汞FAPAS国际比对,测定结果的Z比分数为1.0,故本方法适用于水产品中汞化合物形态的分析测定。     

甲苯胺蓝与牛血清白蛋白作用的光谱特性研究

应用荧光光谱法研究了甲苯胺蓝(TB)与牛血清白蛋白(BSA)相互作用的光谱特性.测定了TB与BSA在20℃,30℃和40℃3个温度下的结合常数KA分别为8.94×103,1.75×104,1.74×104L/mol,结合位点数n分别为0.66,0.71和0.93.实验表明:TB与BSA的荧光猝灭主要为静态猝灭;利用Gibbs-Helmholtz方程计算得到热力学参数ΔH为49.416kJ,ΔS为244.876J.mol-1.K-1,探讨了它们的相互作用机理,结果表明TB主要以氢键作用力与BSA相互作用;应用同步荧光技术研究了TB对BSA构象的影响.     

荧光色散谱对FeS(X5△)振动常数的实验确认

基于之前的激光诱导荧光激发谱工作,采用激光诱导荧光色散谱技术直接侦测中性FeS基电子态X5￠振动能级到v″=3而获得其振动常数. 所得FeS(X⁵△)振动频率值(518±5 cm^-1)和最近的光电子能谱测量值(520±30 cm^-1) [J. Phys. Chem. A 107, 2821 (2003)]符合得较好,该光电子能谱测量值是之前唯一报道的FeS电子态振动频率的实验值. 通过比较实验结果和相关文献(主要来自理论预测),确定FeS的基态是X⁵△态.     

Spectrofluorimetric study on the interaction between antimicrobial drug sulfamethazine and bovine serum albumin

The interaction between the antimicrobial drug sulfamethazine (STM) and bovine serum albumin (BSA) has been studied using steady state and synchronous fluorescence spectroscopy. Fluorescence emission data revealed that BSA (2×10⁻⁶ M) fluorescence was statically quenched by STM at various concentrations, which implies that STM-BSA complex has been formed. The fluorescence emission data was analyzed via applying the Stern-Volmer analysis in combination with thermodynamic investigation, where obtained results revealed that quenching is static with quenching constants of 2.371, 1.658, and 0.916×10⁵ M⁻¹ at 298, 304, and 310 K, respectively. Binding constants and number of binding sites at different temperatures were also determined by applying the Scatchard method, which in turn were used to construct the van't Hoff plot in order to estimate the enthalpy (ΔH) and entropy changes (ΔS) for the complexation process. An average of 1.00±0.17 was estimated for the number of sites of BSA, which indicated that STM binds to BSA with stoichiometric ratio of 1:1. The values that were estimated from the van't Hoff plot for ΔH and (ΔS) were −36.8 kJ mol⁻¹ and −14.9 J mol⁻¹ K⁻¹, respectively, which indicate that the STM-BSA complex is stabilized with hydrogen bonds and van der Waals interactions. Synchronous fluorescence data was obtained at Δλ of 15 and 60 nm, where obtained results confirmed that STM binds to BSA at the tryptophan residue (Trp. 213). In addition, the distance between STM and the Trp. 213 was estimated via employing the Förster's non-radiative energy-transfer theory, and was found to be 2.73 nm, which in turn indicated that STM can bind to BSA with high probability.     

Luminescence efficiencies of self- and Tm activated CaWO4 under vacuum ultraviolet radiation excitation

Luminescence efficiency of self-activated CaWO₄ under 147 nm vacuum ultraviolet (VUV) radiation excitation is about 90% of that of BaMgAl₁₀O₁₇:Eu²⁺ (BAM), the commercial blue plasma display panel (PDP) phosphor. However, the color purity and the particle size of the former needs substantial modification before it can be considered for application in PDP. CaWO₄:Tm exhibits Tm³⁺ emission peaks in the blue region due to energy transfer from WO₄ to Tm³⁺ ions but the overall emission intensity under 147 nm excitation is reduced when compared to that of CaWO₄.     

键合型铕-十一烯酸-硅橡胶复合材料的合成及其荧光性能

以铕-十一烯酸配合物和含氢硅油为原料,在铂催化剂作用下制备稀土有机硅加成产物。对产物进行红外光谱和核磁共振分析。结果表明,配合物键接在有机硅高分子主链上,加成产物为一种键合型的铕-十一烯酸-硅橡胶复合材料。荧光光谱分析确定复合材料的最佳激发波长为393 nm;最强发射波长为616 nm,为铕离子的特征发射。同时,随着铕离子浓度的增大,复合材料没有荧光猝灭现象。     

皮肤晚期糖基化终末产物的自体荧光光谱特性

在分析晚期糖基化终末产物(Advanced glycation end products,AGEs)标准品三维荧光光谱和皮肤中AGEs自体荧光光谱的基础上,确定了皮肤中AGEs的最佳激发波长为370 nm.使用自行设计的皮肤荧光光谱检测装置对正常人和糖尿病患者皮肤AGEs的荧光光谱进行了检测,结果表明:在418,450...     

异丙醇-水配合液的荧光偏振和时间分辨特性

研究了紫外光照射下异丙醇-水配合液的偏振荧光光谱,以及不同荧光峰处光子强度随时间的衰变过程,计算了偏振度并讨论了其偏振特性,测试了不同峰位对应的荧光寿命并分析了其荧光发射特性.结果表明,异丙醇-水配合液在紫外光激励下发射的荧光为具有确定分子取向的部分偏振光,偏振度和各向异性度分别为0.542和0.441.在波长为220...