多光子技术及其应用研究进展

本文综述了多光子技术的基本原理及其在生命科学、化学、物理和材料科学领域的应用研究进展。     

样品价态对激光气化产生Cu/Cl团簇的组成和稳定性的影响

研究团控的形成条件、形成机理是目前团簇科学中的一个热点领域［‘］．产生气相团簇的方法主要有Knudsen高温炉扩散法、粒子溅射法、激光气化／分子束法、直接激光气化法·因为不需要另加缓冲气体，直接激光气化法【刀具有对体系真空要求较低，装置简单，容易和飞行时间质谱结     

Determination of long-lived radionuclides in concrete matrix by laser ablation inductively coupled plasma mass spectrometry

A laser ablation system using a Nd:YAG laser was coupled both to a quadrupole inductively coupled plasma (ICP) mass spectrometer and to a double-focusing sector field ICP mass spectrometer. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was applied for the determination of long-lived radionuclides in a concrete matrix. The investigated samples were two laboratory standards with a concrete matrix, which we doped with different long-lived radionuclides (e.g. ⁹⁹Tc, ²³²Th, ²³³U, ²³⁷Np) from the ng g⁻¹ to μ g⁻¹ concentration range and an undoped concrete material (blank). Detection limits for long-lived radionuclides in the 10 ng g⁻¹ range are reached for LA-ICP-MS using the quadrupole mass spectrometer. With double-focusing sector field ICP-MS, the limits of detection are in general one order of magnitude lower and reach the sub ng g⁻¹ range for ²³³U and ²³⁷Np. A comparison of mass spectrometric results with those of neutron activation analysis on undoped concrete sample indicates that a semiquantitative determination of the concentrations of the minor and trace elements in the concrete matrix is possible with LA-ICP-MS without using a standard reference material.     

Atom-surface elastic scattering in the presence of laser radiation

A qualitative discussion on atom-surface elastic scattering taking place in the presence of laser radiation is given. It is suggested that appreciable effects of laser radiation on diffraction patterns may be expected if the laser radiation is capable of inducing electronic transitions in atoms with a large probability.Research sponsored by the Air Force Office of Scientific Research (AFSC), United States Air Force, under Contract No. F49620-78-C-0005, and the National Science Foundation under Grant No. CHE77-27826. The United States Government is authorized to reproduce and distribute reprints for governmental purposes notwithstanding any copyright notation hereon.Alfred P. Sloan Research Fellow, 1976–1980; Camille and Henry Dreyfus Teacher-Scholar, 1975–1980.     

模拟混凝土孔溶液中钢筋钝化膜生长动力学及孔蚀过程的研究

用恒电位电流衰减法及激光扫描光电化学显微技术研究了在于ＰＨ＝１２．５及１３．８的模拟混凝土孔溶液中钢筋钝化化膜的生长动力学及相应的破坏过程，实验结果表明，钢筋钝化膜的生长过程存在两个主要阶段，各阶段膜厚均与生长时间存在正比对数关系，但当ｔ＜３０秒和ｔ＞３０秒时，膜的生长表出出不同的动力学特征，在钝化发生点蚀前，钝化膜的微区光电流一定的预兆，腐蚀抑制剂ＮａＮＯ２影响膜的生长过程及膜厚，能提高钢筋的抗     

Tunable UV generation at 283 nm by frequency doubling and sum frequency mixing of two semiconductor lasers for the detection of Pb

High resolution atomic absorption measurements of lead at 283 nm in a vapor cell were performed by frequency doubling an 850 nm laser diode to obtain 425 nm light, followed by sum frequency generation of the harmonic radiation with a second 850 nm laser diode.     

Laser Doppler anemometry under plasma conditions. Part II. Measurements in an inductively coupled r.f. plasma

Laser Doppler anemometry is used for the measurements of the plasma and particle velocity profiles in the coil region of an inductively coupled r.f. plasma. Results are reported for a 50 mm i.d. induction plasma torch operated at atmospheric pressure with argon as the plasma gas. The oscillator frequency is 3 MHz and the plate power is varied between 4.6 and 10.5 kW. Plasma velocity measurements are obtained using a fine carbon powder as a tracer. Measurements are also given for larger silicon particles ( ) centrally injected into the discharge under different operating conditions.Nomenclature d _p particle diameter - P ₀ plasma power - Q ₁ powder carrier gas flow rate - Q ₂ plasma gas flow rate - Q ₃ sheath gas flow rate - r distance in the radial direction - V axial plasma velocity - V _p axial particle velocity - Z distance in the axial direction - standard deviation     

C60-地塞米松的激光激发

利用激光光解装置检测了C60-地塞米松(C60-DE)的苯溶液在355 nm激光照射下产生的激发三重态, 3C60-DE*出现四个吸收峰, 分别位于700、440、350 和310 nm. 在330 nm处观察到了它的漂白吸收最大值, 这与其基态吸收最大值相对应. 3C60-DE*能够将能量转移给O2分子而淬灭. 与3C60*相比, 3C60-DE*的三重态鄄三重态(T-T)淬灭速率常数减小(3C60*为(5.03±1.31)×109 L·mol-1·s-1, 3C60-DE*为(3.53±0.87)×109 L·mol-1·s-1), 而寿命增加了(3C60*为(12.0±2.6) μs, 3C60-DE*为(18.0±3.3) μs), 这可能是C60分子上连接了地塞米松分子后减小了C60球之间碰撞的几率所致.     

天线若丹明染料分子内能量与电荷传递的研究

染料三重态在染料激光的应用中起着重要作用，尤其是三重态一Z重态（T－T）吸收常常会造成谐振腔损耗＊．为了减少由基态吸收而造成的话振腔损耗，带有紫外吸收天线分子的三发色团染料已在研究问，2，5·二苯基螨喳（PP0）在紫外区（如308删）有很强的吸收，PPO－rhod．系列染料（见图1）在紫外区的吸收就很强，由PPO到若丹明母体的单线态一单线态（S功能量传递使这类三发色团染料具有较大的荧光量子效率，较小的基态重复吸收耗能卜，司．然而，在610N640nm区域中这些天线若丹明染料的激光输出效率远远小于若丹明Rh630＊，其原因正是…     

A new-type photoreaction of a carbonyl compound: Part 2. Photoinduced ω-bond dissociation in p-halomethylbenzophenone studied by time-resolved EPR technique and laser flash photolysis

Photodissociation of the carbon-X (X = Br and Cl) bonds in p-bromo- and p-chloromethylbenzophenone (BMBP and CMBP) in solution were investigated by time-resolved EPR and laser flash photolysis techniques. BMBP and CMBP were found to undergo ω-bond cleavage to yield the p-benzoylbenzyl radical (BBR) at 295 K, and the quantum yields (Φ_BBR) were determined. The CIDEP signal originated from BBR formed upon decomposition of CMBP was obtained while that for BMBP was absent. By using triplet sensitization of acetone, the efficiencies (_BBR) of the CX bond fission in the triplet states of BMBP and CMBP were determined. The agreement between the Φ_BBR and _BBR values for CMBP indicates that the CCl bond dissociation occurs only in the triplet state. In contrast to CMBP, the cleavage of the CBr bond in BMBP upon direct excitation was concluded to be the event only in the excited singlet state without triplet formation, whereas the triplet state was also reactive for ω-bond dissociation. The rate of CBr bond dissociation seemed to be greater than that of intersystem crossing from the S₁ to the T₁ state. Schematic energy diagrams of the excited states of BMBP and CMBP were shown, and the reaction profiles were discussed from the viewpoint of the CX bond enthalpies.