激光诱导金纳米棒图案化光纤SERS探针

研究了激光诱导沉积制备光纤表面增强拉曼散射(SERS)探针,并对探针的SERS性能进行检测。探讨光纤探针制备过程中金纳米棒溶液的浓度对探针灵敏度的影响。结果表明,将不同浓度的金纳米棒溶液进行激光诱导,在光纤端面会形成金纳米棒团簇和分散两种纳米结构。金纳米棒溶液的浓度、激光功率、诱导时间等因素都会对诱导沉积图案产生影响。实验利用功率为5 mW的激光进行诱导,在1.5×10^-9, 1.0×10^-9和7.5×10^-10 mol·L^-1的金纳米棒溶液中,经5 min沉积,制备出不同图案的光纤SERS探针。采用晶种法合成金纳米棒,用透射电子显微镜(TEM)观察金纳米棒形貌,并根据TEM图像分析计算了合成金纳米棒的长径比约为3.8。用扫描电子显微镜(SEM)观察金纳米棒的形貌以及激光诱导沉积后的纤维修饰端形貌,7.5×10^-10 mol·L^-1的金纳米棒溶液进行激光诱导,金纳米棒在光纤端面分布较为分散,而1.5×10^-9和1.0×10^-...     

无内热激光器运转对抽运光光强的需求条件研究

研究了无内热激光器和激光放大器运转时对抽运光的需求条件.运用激光器的速率方程理论,给出了抽运光所应满足条件的表达式.无内热激光运转时,不仅要求抽运光光强要大于阈值条件,而且要大于某个最小抽运光强(与增益材料性质、抽运光波长、激光波长等有关).以掺镱的KY(WO4)2晶体为无内热激光器的放大介质,计算了抽运光光强应满足的空间分布条件.要使激光器无内热运转,抽运光光强需随激光光强的增大而相应减小.对于无内热激光器,抽运光光强的空间分布与谐振腔前后镜的反射率和增益介质长度密切相关,在谐振腔输出耦合镜反射率不是太低的情况下,腔内抽运光强需近似为均匀分布.     

激光雷达干扰效果评估方法研究

研究了光电干扰对测距和跟踪测量激光雷达干扰效果的评估方法.在深入分析激光雷达光电干扰机理的基础上,提出了相应的干扰效果评估准则.对激光测距机的距离欺骗干扰效果采用测距误差-干扰成功率准则或准测率准则定量评估,对测距机的激光盲干扰效果依据盲激光对测距准确度、测距功能的影响程度进行评估.对于跟踪测量激光雷达,根据实施干扰后其跟踪误差是否超出正常跟踪准确度的三倍判定一次干扰是否有效,再依据多次试验的干扰成功率的大小评估干扰效果.     

谷氨酸钠溶液514nm激光拉曼光谱受环境光影响的研究

探讨了环境光的存在对谷氨酸钠溶液的514 nm绿色激光激发的拉曼光谱的影响.研究表明不同的环境光、自然光和室内荧光灯光均会对514 nm激光拉曼光谱产生干扰,存在着特征干扰峰.自然阳光干扰较小;而荧光灯光表现为1127、2107 cm-1和2170 cm-1等3个明显尖锐的脉冲峰,不能忽略.建议在进行谷氨酸钠溶液514 nm绿色激光拉曼光谱检测时,须在暗室或暗罩中进行,以完全隔离环境光的影响.     

单个血小板的拉曼光谱分析

利用波长为785 nm的激光束构建光镊拉曼光谱系统,俘获悬浮在生理盐水中的人和三种动物(家猪、大鼠、家兔)的单个血小板,激发并收集其拉曼光谱。单个血小板的平均拉曼光谱信号清楚地反映了血小板的生化组成特点,人血小板的拉曼光谱与三种动物的明显不同,1 524 cm-1是人类血小板所特有的拉曼信号峰,而1 157 cm-1在人类中显著高于三种动物的,人类血小板的平均I_{1 157}/ I_{1 003}为0.795,而家猪、大鼠、家兔的分别为0.532,0.502,0.485。多元统计分析结果显示,不同物种血小板的拉曼信号落入不同的空间,可以判别区分。上述结果表明,单个血小板的拉曼光谱基本反映了血小板的主要组成成分,结合多元统计分析可以用于辨别不同的物种的血小板,光镊拉曼光谱系统是实时研究细胞生理、生化变化的快速简便而有效的工具。     

爆炸性物质太赫兹时间分辨光谱测量

利用自由空间电光取样方法,研究了四种炸药在太赫兹(THz)频段的光学特性。通过太赫兹时间分辨光谱测量,作者得到了四种炸药DNT(2,4-二硝基甲苯)、钝化的RDX(黑索今)、HMX(奥克托金)和TNT(2,4,6-三硝基甲苯)的透射光谱,进而计算得出它们在0.2～2.5 THz频段的吸收系数和折射率。作者发现,2,4-DNT在1.08 THz,HMX在1.82 THz存在显著的吸收尖峰,RDX在此频段存在多个吸收峰,TNT的吸收谱线相对其他三种样品比较平缓,这种共振吸收一般认为是由分子间相互作用或声子共振模式引起的。四种炸药对太赫兹波独特的吸收性质说明,太赫兹时间分辨光谱测量技术在炸药特征识别及安全检测领域具有潜在应用价值。作者对致癌物质偶氮苯进行了太赫兹光谱研究,发现了国产偶氮苯和进口偶氮苯在太赫兹波段均存在特征吸收峰,可用于物质鉴别。     

Time resolved spectroscopy in laser grade organic dyes

Time resolved spectroscopy is discussed along with the theoretical and experimental methods used to measure the fluorescence lifetimes in various laser grade organic dyes. The role of solvents and their viscosities in the fluorescence life time is also discussed. Different photophysical parameters have been obtained in rigid and non-rigid dye molecules.     

Comparison of laser Doppler and laser speckle contrast imaging using a concurrent processing system

Full field laser Doppler imaging (LDI) and single exposure laser speckle contrast imaging (LSCI) are directly compared using a novel instrument which can concurrently image blood flow using both LDI and LSCI signal processing. Incorporating a commercial CMOS camera chip and a field programmable gate array (FPGA) the flow images of LDI and the contrast maps of LSCI are simultaneously processed by utilizing the same detected optical signals. The comparison was carried out by imaging a rotating diffuser. LDI has a linear response to the velocity. In contrast, LSCI is exposure time dependent and does not provide a linear response in the presence of static speckle. It is also demonstrated that the relationship between LDI and LSCI can be related through a power law which depends on the exposure time of LSCI.     

Propagation characteristics of tilted partially coherent rectangular flat-topped beam in turbulent atmosphere

In this paper, the effects of atmospheric turbulence on the intensity distribution of a tilted Rectangular Partially Coherent Flat-Topped (RPCFT) beam were studied. An analytical formula for the intensity distribution was derived. POWER In Bucket (PIB) value is calculated numerically. The effects of source parameters – such as correlation length, order of flatness and tilt coefficient – on the intensity were analyzed. Detailed analysis demonstrates that these parameters have an influence on beam propagation properties. The analyses are illustrated by numerical examples and graphs.     

Terahertz radiation generation by beating of two spatial-Gaussian lasers

Terahertz radiation generation is proposed based on beating of two spatial-Gaussian lasers in a periodic density plasma, where a transverse component of current is realized that resonantly excites the radiation with efficiency ∼10⁻³. Importance of laser-beam-width, amplitude and periodicity of density structure is discussed for the efficient THz generation.