高光通量短波红外静止干涉成像光谱仪研究

讨论高光通量静止干涉（傅里叶变换）成像光谱仪的基本原理及结构特点，建立了短波红外的高光通量静止傅里叶变换光谱仪的实验系统，给出了实验结果。     

Matrix assisted pulsed laser evaporation processing of triacetate-pullulan polysaccharide thin films for drug delivery systems

We report the first successful deposition of triacetate-pullulan polysaccharide thin films by matrix assisted pulsed laser evaporation. We used a KrF* excimer laser source (λ = 248 nm, τ ≈ 20 ns) operated at a repetition rate of 10 Hz. We demonstrated by FTIR that our thin films are composed of triacetate-pullulan maintaining its chemical structure and functionality. The dependence on incident laser fluence of the induced surface morphology is analysed.     

激光对生物分子的共振激发作用

在生物分子的“谐”和“非谐”振子势模型的基础上，用量子力学讨论了激光对生物分子的共振激作用；并用之对激光的生物激活、诱变机理的“共振吸收”定性理论作一解析分析。     

毛细管凝胶电泳的激光光热在线检测

近年来,毛细管电泳已成为一种高效快速的微化学分离分析新技术,在无机、有机及生物化学分析中得到了广泛的应用.但毛细管的内径小,进样量在pg～ng级,给样品的检测带来新的困难.因此,发展高灵敏度的显微在线检测器,已成为毛细管电泳技术发展中的重要环节.基于各种原理的检测器研究已有报道~[1].Dovichi等曾用热透镜技术在线检测了乙腈/     

FTS-20E富里叶红外光谱仪数据系统改造

报道了ＦＴＳ－２０Ｆ富里叶红外光谱仪数据系统改造的工作采用ＩＢＭ４８６计算机及新的数据接口取代了陈旧的ＮＯＶＡ４数据系统，文章详细描述了其硬件设计和软件编辑，改造不仅更新了ＦＴＳ－２０Ｅ里叶红外光谱仪，而且还使其达到９０年代的水平。     

散射背景下激光热透镜光谱分析法测定人体血清中锌量

建立了散射背景下测定人体血清中Zn^2＋含量的激光热透镜光谱分析方法。比较了蛋白质微粒散射对于分光光度法和激光热透镜光谱分析法测定的影响。结果表明，激光热透镜光谱分析方法能够避免溶液中存留蛋白质微粒散射的影响。Zn^2＋量在0～1．6μg/mL范围内呈线性关系（r=0．9986），检出限为1ng/mL。应用于人体血清中Zn^2＋含量的测定，与原子吸收法测定结果基本一致。     

结晶聚合物的中间层

介绍了结晶聚合物中间层概念及各种实验技术所提供的中间层存在的证据。附25篇参考文献。     

LIGHT-SCATTERING STUDY OF POLYELECTROLYTE HOLLOW CAPSULES

Silver halide (AgX) microcrystal was used as template to synthesize hollow polyelectrolyte capsules. These hollow capsules were characterized by laser light scattering (LLS) used to measure the size of the capsules in solution. The ratio of hydrodynamic radius (Rh) from dynamic LLS to the radius of gyration (Rg) from static LLS is almost unity, revealing that the entities are hollow in solution. The results suggest that the LLS method can be regarded as a good complement to the confocal laser scanning microscopy (CLSM) method for the characterization of small hollow capsules, and it possesses the advantage of not needing fluorescence labeling.     

Laser technology application: Deformation and elastic recovery of semi-crystalline polymers

The elastic deformation-recovery and mechanical properties of semi-crystalline polymers (HDPE, LDPE and their blends) were investigated. An optoelectronic technique based on a laser beam was used to analyze the behavior of the samples under radial stress. The laser technology showed that the recovery process develops in two stages. The first one is governed by the elastic component and the second and slower one is controlled by the inelastic component of the material. At low deformation, the overall recovery is attributed to the development of structural micro-domains generated when shearing the amorphous segments of the polymer. The radial Young modulus was also determined and compared to unidirectional measurements. At low deformation both techniques provide very similar values; nevertheless, the radial Young modulus departs significantly from the unidirectional one when increasing the number of cycles of deformation-recovery.     

激光核聚变中的一种X光解谱方法

本文在SAND迭代法的基础上,采取带有周期性光滑化的限幅迭代方法,求解激光核聚变中的X光能谱取得了较好的结果。这个方法适用于根据亚千X射线谱仪、多道k边滤波谱仪和多道滤波-荧光谱仪的测量结果回推靶等离子体的X射线能谱。计算结果表明,该方法完全抑制了数值不稳定性,消除了非物理的“负能谱”现象和解谱结果中的数值结构。特别是该方法对初始试探谱有很强的适应性,解谱计算结果与初始试探谱无关。